We study self-sustained oscillations (SO) in a Nb superconducting stripline resonators (SSR) integrated with a DC superconducting quantum interface devices (SQUID). We find that both the power threshold where these oscillations start and the oscillations frequency are periodic in the applied magnetic flux threading the SQUID loop. A theoretical model which attributes the SO to a thermal instability in the DC-SQUID yields a good agreement with the experimental results. This flux dependant nonlinearity may be used for quantum state reading of a qubit-SSR integrated device.
Microwave spectroscopy is a powerful experimental tool to reveal information on the intrinsic properties of superconductors. Superconducting stripline resonators, where the material under study constitutes one of the ground planes, offer a high sensitivity to investigate superconducting bulk samples. In order to improve this measurement technique, we have studied stripline resonators made of niobium, and we compare the results to lead stripline resonators. With this technique we are able to determine the temperature dependence of the complex conductivity of niobium and the energy gap $Δ(0)=2.1…
Fast resonance frequency modulation of a superconducting stripline resonator is investigated. The experiments are performed using a novel device which integrates a hot electron detector (HED) into a superconducting stripline ring resonator. Frequency modulation is demonstrated by both applying dc current or voltage to the HED, and by applying optical illumination, with modulation frequencies of up to 4.2GHz. Potential applications for such a device are in telecommunication, quantum cryptography and biofluorescence.
We utilize a superconducting stripline resonator containing a dc-SQUID as a strong intermodulation amplifier exhibiting a signal gain of 25 dB and a phase modulation of 30 dB. Studying the system response in the time domain near the intermodulation amplification threshold reveals a unique noise-induced spikes behavior. We account for this response qualitatively via solving numerically the equations of motion for the integrated system. Furthermore, employing this device as a parametric amplifier yields a gain of 38 dB in the generated side-band signal.
We study theoretically and experimentally the response of a microwave superconducting stripline resonator, integrated with a microbridge, to a monochromatic injected signal. We find that there is a certain range of driving parameters, in which a novel nonlinear phenomenon immerges, and self-sustained modulation of the reflected power off the resonator is generated by the resonator. A theoretical model which attributes the self modulation to a thermal instability yields a good agreement with the experimental results.
We study a microwave superconducting stripline resonator made of NbN on a Sapphire wafer. Novel, self-sustained modulation of the reflected power off the resonator, at frequencies of up to 60MHz, has been recently reported. Here we show experimentally that near the self modulation threshold, the device exhibits a giant nonlinearity, which manifests itself in an extremely high intermodulation gain, accompanied by a very strong noise squeezing and period doubling of various orders. Such a device is highly suitable for serving as a readout device in quantum data processing systems.
We study thermal instability in a driven superconducting NbN resonator integrated with a microbridge. A monochromatic input drive is injected into the resonator and the response is measured as a function of the frequency and amplitude of the drive. Inside a certain zone in the frequency-amplitude plane the system has no steady state, and consequently self-sustained modulation of the reflected power off the resonator is generated. A theoretical model, according to which the instability originates by a hot spot forming in the microbridge, exhibits a good quantitative agreement with the experimen…
Planar superconducting microwave resonators are key elements in a variety of technical applications and also act as sensitive probes for microwave spectroscopy of various materials of interest. Here superconducting Pb is a suitable material as a basis for microwave stripline resonators. To utilize Pb stripline resonators in a variable magnetic field (e.g. in ESR), the electrodynamics of such resonators in finite magnetic field has to be well understood. Therefore we performed microwave transmission measurements on superconducting Pb stripline resonators in a variable, parallel magnetic field. …
We study superconducting stripline resonator (SSR) made of Niobium, which is integrated with a superconducting interference device (SQUID). The large nonlinear inductance of the SQUID gives rise to strong Kerr nonlinearity in the response of the SSR, which in turn results in strong coupling between different modes of the SSR. We experimentally demonstrate that such intermode coupling gives rise to dephasing of microwave photons. The dephasing rate depends periodically on the external magnetic flux applied to the SQUID, where the largest rate is obtained at half integer values (in units of the …
Supplementary information for the article "Intermode Dephasing in a Superconducting Stripline Resonator" (arXiv:0901.3110). The supplementary information is devoted to three main issues. In section I we describe the fabrication process; in section II we present the derivation of the Hamiltonian of the system and provide a more detailed discussion about the properties of the microbridges; in section III the hysteretic response of the resonator and the effect of heating are discussed.
We present a method to measure the absolute surface resistance of conductive samples at a set of GHz frequencies with superconducting lead stripline resonators at temperatures 1- 6K. The stripline structure can easily be applied for bulk samples and allows direct calculation of the surface resistance without the requirement of additional calibration measurements or sample reference points. We further describe a correction method to reduce experimental background on high-Q resonance modes by exploiting TEM-properties of the external cabling. We then show applications of this method to the refer…
We theoretically investigate selective coupling of superconducting charge qubits mediated by a superconducting stripline cavity with a tunable resonance frequency. The frequency control is provided by a flux biased dc-SQUID attached to the cavity. Selective entanglement of the qubit states is achieved by sweeping the cavity frequency through the qubit-cavity resonances. The circuit is scalable, and allows to keep the qubits at their optimal points with respect to decoherence during the whole operation. We derive an effective quantum Hamiltonian for the basic, two-qubit-cavity system, and analy…
The nonlinearity exhibited by the kinetic inductance of a superconducting stripline couples stripline resonator modes together in a manner suitable for quantum non-demolition measurement of the number of photons in a given resonator mode. Quantum non-demolition measurement is accomplished by coherently driving another resonator mode, referred to as the detector mode, and measuring its response. We show that the sensitivity of such a detection scheme is directly related to the dephasing rate induced by such an intermode coupling. We show that high sensitivity is expected when the detector mode …
We study a novel configuration for displacement detection consisting of a nanomechanical resonator coupled to both, a radio frequency superconducting interference device (RF SQUID) and to a superconducting stripline resonator. We employ an adiabatic approximation and rotating wave approximation and calculate the displacement sensitivity. We study the performance of such a displacement detector when the stripline resonator is driven into a region of nonlinear oscillations. In this region the system exhibits noise squeezing in the output signal when homodyne detection is employed for readout. We…
Due to their superior noise performance, SQUIDs are an attractive alternative to high electron mobility transistors for constructing ultra-low-noise microwave amplifiers for cryogenic use. We describe the use of a lumped element SQUID inductively coupled to a quarter wave resonator. The resonator acts as an impedance transformer and also makes it possible for the first time to accurately measure the input impedance and intrinsic microwave characteristics of the SQUID. We present a model for input impedance and gain, compare it to the measured scattering parameters, and describe how to use the …
Absolute measurement of penetration depth of superconducting thin films using microwave stripline resonators
Tata Institute of Fundamental Research（塔塔基础研究所）；School of Physical Sciences, UM-DAE Centre for Excellence in Basic Sciences, University of Mumbai（孟买大学物理科学学院，UM-DAE基础科学卓越中心）
In this paper we present experimental data on the frequency domain response of a SQUID ring (a Josephson weak link enclosed by a thick superconducting ring) coupled to a radio frequency (rf) tank circuit resonator. We show that with the ring weakly hysteretic the resonance lineshape of this coupled system can display opposed fold bifurcations that appear to touch (pinch off). We demonstrate that for appropriate circuit parameters these pinch off lineshapes exist as solutions of the non-linear equations of motion for the system.
We experimentally and numerically study a NbN superconducting stripline resonator integrated with a microbridge. We find that the response of the system to monochromatic excitation exhibits intermittency, namely, noise-induced jumping between coexisting steady-state and limit-cycle responses. A theoretical model that assumes piecewise linear dynamics yields partial agreement with the experimental findings.
In this paper we study numerical solutions to the quasi-classical equations of motion for a SQUID ring-radio frequency (rf) resonator system in the regime where the ring is highly hysteretic. In line with experiment, we show that for a suitable choice of of ring circuit parameters the solutions to these equations of motion comprise sets of levels in the rf voltage-current dynamics of the coupled system. We further demonstrate that transitions, both up and down, between these levels can be controlled by voltage pulses applied to the system, thus opening up the possibility of high order (e.g. 10…
We study the coherence of flux-tunable Josephson junction resonators made with two different fabrication processes. In the first process, devices are made using a single step of evaporation in which the resonator and the junctions of the SQUID are made at the same time. In the second process, devices are made with an identical geometry, but in which the resonators are made from a MoRe superconding layer to which an the junctions are added later in a second step. To characterize the coherence of the two types of SQUID cavities, we observe and analyze the quality factor of their resonances as a …
In this paper we analyze the properties of a dc SQUID when the London penetration depth λis larger than the superconducting film thickness d. We present equations that govern the static behavior for arbitrary values of Λ= λ^2/d relative to the linear dimensions of the SQUID. The SQUID's critical current I_c depends upon the effective flux Φ, the magnetic flux through a contour surrounding the central hole plus a term proportional to the line integral of the current density around this contour. While it is well known that the SQUID inductance depends upon Λ, we show here that the focusing of ma…
We study the metastable response of a highly hysteretic DC-SQUID made of a Niobium loop interrupted by two nano-bridges. We excite the SQUID with an alternating current and with direct magnetic flux, and find different stability zones forming diamond-like structures in the measured voltage across the SQUID. When such a SQUID is embedded in a transmission line resonator similar diamond structures are observed in the reflection pattern of the resonator. We have calculated the DC-SQUID stability diagram in the plane of the exciting control parameters, both analytically and numerically. In additio…
We report on the development of an analytical model describing the readout power and SQUID hysteresis parameter dependence of the resonator characteristics used for frequency encoding in microwave SQUID multiplexers. Within the context of this model, we derived the different dependencies by analyzing the Fourier components of the non-linear response of the non-hysteretic rf-SQUID. We show that our model contains the existing model as a limiting case, leading to identical analytical expressions for small readout powers. Considering the approximations we made, our model is valid for rf-SQUID hys…
We report the measurement of intermodulation gain in NbN superconducting stripline resonators. In the intermodulation measurements we inject two unequal tones into the oscillator, the pump and signal, both lying within the resonance band. At the onset of instability of the reflected pump we obtain a simultaneous gain of both the idler and the reflected signal. The measured gain in both cases can be as high as 15 dB, whereas to the best of our knowledge intermodulation gain greater than unity in superconducting resonators has not been reported before in the scientific literature.
In this paper we report some extraordinary nonlinear dynamics measured in the resonance curve of NbN superconducting stripline microwave resonators. Among the nonlinearities observed: aburpt bifurcations in the resonance response at relatively low input powers, asymmetric resonances, multiple jumps within the resonance band, resonance frequency drift, frequency hysteresis, hysteresis loops changing direction and critical coupling phenomenon. Weak links in the NbN grain structure are hypothesized as the source of the nonlinearities.
We have measured the backaction of a dc superconducting quantum interference device (SQUID) position detector on an integrated 1 MHz flexural resonator. The frequency and quality factor of the micromechanical resonator can be tuned with bias current and applied magnetic flux. The backaction is caused by the Lorentz force due to the change in circulating current when the resonator displaces. The experimental features are reproduced by numerical calculations using the resistively and capacitively shunted junction (RCSJ) model.
In this paper we show that the radio frequency (rf) dynamical characteristics of a very strongly hysteretic SQUID ring, coupled to an rf tank circuit resonator, display relaxation oscillations. We demonstrate that the the overall form of these characteristics, together with the relaxation oscillations, can be modelled accurately by solving the quasi-classical non-linear equations of motion for the system. We suggest that in these very strongly hysteretic regimes SQUID ring-resonator systems may find application in novel logic and memory devices.
We present a hybrid microwave SQUID multiplexer that combines two frequency-division multiplexing techniques to allow multiplexing a given number of cryogenic detectors with only a fraction of frequency encoding resonators. Similar to conventional microwave SQUID multiplexing, our multiplexer relies on inductively coupling non-hysteretic, unshunted rf-SQUIDs to superconducting microwave resonators as well as applying flux ramp modulation for output signal linearization. However, instead of utilizing one resonator per SQUID, we couple multiple SQUIDs to a common readout resonator and encode the…
We create a Josephson parametric amplifier from a transmission line resonator whose inner conductor is made from a series SQUID array. By changing the magnetic flux through the SQUID loops, we are able to adjust the circuit's resonance frequency and, consenquently, the center of the amplified band, between 4 and 7.8 GHz. We observe that the amplifier has gains as large as 28 dB and infer that it adds less than twice the input vacuum noise.
We realize tunable coupling between two superconducting transmission line resonators. The coupling is mediated by a non-hysteretic rf SQUID acting as a flux-tunable mutual inductance between the resonators. From the mode distance observed in spectroscopy experiments, we derive a coupling strength ranging between -320MHz and 37 MHz. In the case where the coupling strength is about zero, the microwave power cross transmission between the two resonators can be reduced by almost four orders of magnitude compared to the case where the coupling is switched on. In addition, we observe parametric ampl…
We developed a novel magnetic coupling module formed of a monolayer superconducting flux concentrator, which is integrated with a coplanar resonator strongly coupled to HTS rf-SQUID. Three types of resonators, including a long stripline resonator between input loop and pick-up loop of the flux concentrator, a complementary split ring resonator (CSRR), and also a spiral shape inside the input loop are explored. The resonance quality factors as well as the coupling to the SQUID of different patterns of these three types of the resonators is evaluated using Finite Element Method (FEM) simulations…
We investigated both theoretically and experimentally open-ended coplanar waveguide resonators with rf SQUIDs embedded in the central conductor at different positions. These rf SQUIDs can be tuned by an external magnetic field and thus may exhibit the non-centrosymmetric nonlinearity of $χ^{(2)}$ type with suppressed Kerr nonlinearity. We demonstrated that this nonlinearity allows for efficient mixing of $λ/2$ and $λ$ modes in the cavity and thus enables various parametric effects with three wave mixing. These effects are the second harmonic generation, the half tone generation, the parametric…
We investigate a chain of superconducting stripline resonators, each interacting with a transmon qubit, that are capacitively coupled in a row. We show that the dynamics of this system can be described by a Bose-Hubbard Hamiltonian with attractive interactions for polaritons, superpositions of photons and qubit excitations. This setup we envisage constitutes one of the first platforms where all technological components that are needed to experimentally study chains of strongly interacting polaritons have already been realized. By driving the first stripline resonator with a microwave source an…
We exploit nonlinearity in NbN superconducting stripline resonators, which is originated by local thermal instability, for studying stochastic resonance. As the resonators are driven into instability, small amplitude modulated (AM) microwave signals are amplified with the aid of injected white noise. The dependence of the signal amplification on the modulation amplitude and the modulation frequency is examined and compared with theory.
We carry out a quantum analysis of a dc SQUID mechanical displacement detector, comprising a SQUID with mechanically compliant loop segment, which is embedded in a microwave transmission line resonator. The SQUID is approximated as a nonlinear, current dependent inductance, inducing an external flux tunable, nonlinear Duffing self-interaction term in the microwave resonator mode equation. Motion of the compliant SQUID loop segment is transduced inductively through changes in the external flux threading SQUID loop, giving a ponderomotive, radiation pressure type coupling between the microwave a…
We report results of spectroscopic measurements and time-domain measurements of a superconducting flux qubit. The dc superconducting quantum interference device (SQUID), used for readout of the qubit, and a shunt capacitor formed an LC resonator generating a SQUID plasma mode. Higher-order red and blue sidebands were observed in a simple measurement scheme because the resonant energy of the resonator, 600 MHz, was comparable to the thermal energy. We also observed Rabi oscillations on the carrier transition and the first-order sideband transitions. Because the qubit was coupled to a single arm…
In this paper, we propose a scheme to realize three-qubit quantum phase gate of one qubit simultaneously controlling two target qubits using four-level superconducting quantum interference devices (SQUIDs) coupled to a superconducting resonator. The two lowest levels |0> and |1> of each SQUID are used to represent logical states while the higher energy levels |2> and |3> are utilized for gate realization. Our scheme does not require adiabatic passage, second order detuning, and the adjustment of the level spacing during gate operation which reduce the gate time significantly. The scheme is gen…
We study an RF SQUID, in which a section of the loop is a freely suspended beam that is allowed to oscillate mechanically. The coupling between the RF SQUID and the mechanical resonator originates from the dependence of the total magnetic flux threading the loop on the displacement of the resonator. Motion of the latter affects the visibility of Rabi oscillations between the two lowest energy states of the RF SQUID. We address the feasibility of experimental observation of decoherence and recoherence, namely decay and rise of the visibility, in such a system.
We provide a quantum analysis of a DC SQUID mechanical displacement detector within the sub-critical Josephson current regime. A segment of the SQUID loop forms the mechanical resonator and motion of the latter is transduced inductively through changes in the flux threading the loop. Expressions are derived for the detector signal response and noise, which are used to evaluate the position and force detection sensitivity. We also investigate cooling of the mechanical resonator due to back reaction noise from the detector.
We have developed and measured a high-gain quantum-limited microwave parametric amplifier based on a superconducting lumped LC resonator with the inductor L including an array of 8 superconducting quantum interference devices (SQUIDs). This amplifier is parametrically pumped by modulating the flux threading the SQUIDs at twice the resonator frequency. Around 5 GHz, a maximum gain of 31 dB, a product amplitude-gain x bandwidth above 60 MHz, and a 1 dB compression point of -123 dBm at 20 dB gain are obtained in the non-degenerate mode of operation. Phase sensitive amplification-deamplification i…
We have studied the possibility of a single-shot non-demolition measurement of a superconducting qubit using a microstrip SQUID amplifier (MSA). The Johnson noise generated by all resistors in the MSA is taken into consideration. We show that a single-shot non-demolition measurement is possible with six photons in the measurement resonator. For a phase qubit inductively coupled to a measurement resonator we have obtained the expression for the mutual inductance required for measurement of the qubit state.
We have designed, fabricated and measured high-Q $λ/2$ coplanar waveguide microwave resonators whose resonance frequency is made tunable with magnetic field by inserting a DC-SQUID array (including 1 or 7 SQUIDs) inside. Their tunability range is 30% of the zero field frequency. Their quality factor reaches up to 3$\times10^4$. We present a model based on thermal fluctuations that accounts for the dependance of the quality factor with magnetic field.
We propose tunable superconducting split-ring resonators (SRRs) employing nonlinear Josephson inductance. A fraction of SRR is replaced by Nb-AlOx-Nb Josephson tunnel junctions connected in parallel and forming a superconducting quantum interference device (SQUID), whose inductance is sensitive to the external dc magnetic field. Due to the lumped nature of the Josephson inductance, the SRR can be made very compact and its resonance frequency can be tuned by applying magnetic field. We present the model, results of extensive EM-simulation and experimental data for the SRR weakly coupled to a tr…
So far, performance prediction and optimization of microwave SQUID multiplexers has largely been based on simple approximate analytical models and experimental results. This is caused by the complexity of the underlying physics and the intricacy of operation and readout parameters. As a simplified description can never account for all potential effects occurring in a real device, we have developed a software framework to simulate the characteristics and performance of a microwave SQUID multiplexer. Our simulation framework is a powerful tool to guide understanding and optimization of microwave…
We study the dynamics of Josephson Parametric Amplifier (JPA) coupled to a mechanical oscillator, as realised with a dc Superconducting Quantum Interference Device (SQUID) with an embedded movable arm. We analyse this system in the regime when the frequency of the mechanical oscillator is comparable in magnitude with the plasma oscillation of the SQUID. When the nano-mechanical resonator is driven, it strongly affects the dynamics of the JPA. We show that this coupling can considerably modify the dynamics of JPA and induce its multistability rather than common bistability. This analysis is rel…
We demonstrate coherent tunable coupling between a superconducting phase qubit and a lumped element resonator. The coupling strength is mediated by a flux-biased RF SQUID operated in the non-hysteretic regime. By tuning the applied flux bias to the RF SQUID we change the effective mutual inductance, and thus the coupling energy, between the phase qubit and resonator . We verify the modulation of coupling strength from 0 to $100 MHz$ by observing modulation in the size of the splitting in the phase qubit's spectroscopy, as well as coherently by observing modulation in the vacuum Rabi oscillatio…
We describe a possible implementation of the nanomechanical quantum superposition generation and detection scheme described in the preceding, companion paper [Armour A D and Blencowe M P 2008 New. J. Phys. Submitted]. The implementation is based on the circuit quantum electrodynamics (QED) set-up, with the addition of a mechanical degree of freedom formed out of a suspended, doubly-clamped segment of the superconducting loop of a dc SQUID located directly opposite the centre conductor of a coplanar waveguide (CPW). The relative merits of two SQUID based qubit realizations are addressed, in par…
We report on experiments with superconducting metamaterials containing Josephson junctions. In these structures, split-ring resonators used in conventional metamaterials are replaced by superconducting loops that are interrupted by Josephson junctions, so called rf-SQUIDs. Like the split-ring resonators, these elements can be seen as LC-resonators that couple to the magnetic field. The advantage of superconducting thin-film metamaterials is that, due to the tunable intrinsic inductance of the Josephson junction, the resonance frequency of the rf-SQUID can be changed by applying an external dc …
We present a new approach to the induction detection of electron spin resonance (ESR) signals exploiting the nonlinear properties of a superconducting resonator. Our experiments employ a yttrium barium copper oxide (YBCO) superconducting stripline microwave (MW) resonator integrated with a microbridge. A strong nonlinear response of the resonator is thermally activated in the microbridge when exceeding a threshold in the injected MW power. The responsivity factor characterizing the ESR-induced change in the system's output signal is about 100 times larger when operating the resonator near the …
The quantum behaviour of mechanical resonators is a new and emerging field driven by recent experiments reaching the quantum ground state. The high frequency, small mass, and large quality-factor of carbon nanotube resonators make them attractive for quantum nanomechanical applications. A common element in experiments achieving the resonator ground state is a second quantum system, such as coherent photons or superconducting device, coupled to the resonators motion. For nanotubes, however, this is a challenge due to their small size. Here, we couple a carbon nanoelectromechanical (NEMS) device…
A superconducting flux qubit is inductively coupled to a Superconducting QUantum Interference Device (SQUID) magnetometer, capacitively shunted to form a 1.294-GHz resonator. The qubit-state-dependent resonator frequency is weakly probed with a microwave signal and detected with a Microstrip SQUID Amplifier. At a mean resonator occupation $\bar{n}$ = 1.5 photons, the readout visibility is increased by a factor of 4.5 over that using a cryogenic semiconductor amplifier. As $\bar{n}$ is increased from 0.008 to 0.1, no reduction in $T_1$ is observed, potentially enabling continuous monitoring of …
We investigate nondegenerate parametric oscillations in a multimode superconducting microwave resonator that is terminated by a SQUID. The parametric effect is achieved by modulating magnetic flux through the SQUID at a frequency close to the sum of two resonator-mode frequencies. For modulation amplitudes exceeding an instability threshold, self-sustained oscillations are observed in both modes. The amplitudes of these oscillations show good quantitative agreement with a theoretical model. The oscillation phases are found to be correlated and exhibit strong fluctuations which broaden the osci…
We have developed a Josephson parametric amplifier, comprising a superconducting coplanar waveguide resonator terminated by a dc SQUID (superconducting quantum interference device). An external field (the pump, $\sim 20$ GHz) modulates the flux threading the dc SQUID, and, thereby, the resonant frequency of the cavity field (the signal, $\sim 10$ GHz), which leads to parametric signal amplification. We operated the amplifier at different band centers, and observed amplification (17 dB at maximum) and deamplification depending on the relative phase between the pump and the signal. The noise tem…
We present experimental results on a dispersive scheme for reading out a Josephson phase qubit. A capacitively shunted dc-SQUID is used as a nonlinear resonator which is inductively coupled to the qubit. We detect the flux state of the qubit by measuring the amplitude and phase of a microwave pulse reflected from the SQUID resonator. By this low-dissipative method, we reduce the qubit state measurement time down to 25 microseconds, which is much faster than using the conventional readout performed by switching the SQUID to its non-zero dc voltage state. The demonstrated readout scheme allows f…
We consider the interaction of a quantum mechanical SQUID ring with a classical resonator (a parallel $LC$ tank circuit). In our model we assume that the evolution of the ring maintains its quantum mechanical nature, even though the circuit to which it is coupled is treated classically. We show that when the SQUID ring is driven by a classical monochromatic microwave source, energy can be transferred between this input and the tank circuit, even when the frequency ratio between them is very large. Essentially, these calculations deal with the coupling between a single macroscopic quantum objec…
We describe the performance of amplifiers in the 4 GHz--8 GHz range using Direct Current Superconducting Quantum Interference Devices(DC SQUIDs) in a lumped element configuration. We have used external impedance transformers to couple power into and out of the DC SQUIDs. By choosing appropriate values for coupling capacitors, resonator lengths and output component values, we have demonstrated useful gains in several frequency ranges with different bandwidths, showing over 27 GHz of power gain-bandwidth product. In this work, we describe our design for the 4 GHz--8 GHz range and present data de…
