We propose novel coherent-state phase concentration by probabilistic measurement-induced ampli- fication. The amplification scheme uses novel architecture, thermal noise addition (instead of single photon addition) followed by feasible multiple photon subtraction using realistic photon-number resolving detector. It allows to substantially amplify weak coherent states and simultaneously reduce their phase uncertainty, contrary to the deterministic amplifier.
Traditionally, quantum amplification limit refers to the property of inevitable noise addition on canonical variables when the field amplitude of an unknown state is linearly transformed through a quantum channel. Recent theoretical studies have determined amplification limits for cases of probabilistic quantum channels or general quantum operations by specifying a set of input states or a state ensemble. However, it remains open how much excess noise on canonical variables is unavoidable and whether there exists a fundamental trade-off relation between the canonical pair in a general amplific…
We discuss the recently introduced concept of non-deterministic noiseless linear amplification, demonstrating that such an operation can only be performed perfectly with vanishing probability of success. We show that a weak measurement, which imprints the weak value of an observable of a pre-selected and post-selected system onto a probe system, can be used to approximate probabilistic noiseless amplification. This result may be applied to various tasks in continuous variable quantum information, including entanglement concentration, probabilistic cloning, and in quantum repeaters. We discuss …
Most of the schemes for "noiseless" amplification of coherent states, which have recently been attracting theoretical and experimental interest, share a common trait: the amplification is not truly noiseless, or perfect, for non-zero success probability. While this must hold true for all phase-independent amplification schemes, in this work we point out that truly noiseless amplification is indeed possible, provided that the states which we wish to amplify come from a finite set. Perfect amplification with unlimited average gain is then possible with finite success probability, for example usi…
A scheme for the detection of low-intensity optical coherent signals was studied which uses a probabilistic amplifier operated in the non-heralded version, as the underlying non-linear operation to improve the detection efficiency. This approach allows us to improve the statistics by keeping track of all possible outcomes of the amplification stage (including failures). When compared with an optimized Kennedy receiver, the resulting discrimination success probability we obtain presents a gain up to ~1.85% and it approaches the Helstrom bound appreciably faster than the Dolinar receiver, when e…
A probabilistic imaginary-time evolution (PITE) method was proposed as a nonvariational method to obtain a ground state on a quantum computer. In this formalism, the success probability of obtaining all imaginary-time evolution operators acting on the initial state decreases as the imaginary time proceeds. To alleviate the undesirable nature, we propose quantum circuits for PITE combined with the quantum amplitude amplification (QAA) method. We reduce the circuit depth in the combined circuit with QAA by introducing a pre-amplification operator. We successfully demonstrated that the combinatio…
A general framework of quantum state amplification using the language of quantum state transformation is given systematically for the first time. The concept of amplification of quantum states is defined specifically and the amplification of a set of quantum states is formulated generally as the transformation of quantum states. Three different kinds of important quantum amplifications, i.e., deterministic noisy quantum amplification, probabilistic noiseless quantum amplification, and deterministic noiseless quantum amplification are identified and discussed. For deterministic quan- tum amplif…
We analytically show that probabilistic amplification of a weak coherent state stored inside an atomic medium can be achieved via detection of coherently scattered photons. We show that this is because of collective excitations created among atoms in the ensemble. We describe the physics of the amplification and identify the failure events, which occur during the amplification process. The amplification is realized by coherently mapping a weak coherent state in an ensemble of $Λ$-level atoms followed by detection of multiple Raman scattered photons, conditionally projecting the coherent state …
Phase insensitive optical amplification of an unknown quantum state is known to be a fundamentally noisy operation that inevitably adds noise to the amplified state [1 - 5]. However, this fundamental noise penalty in amplification can be circumvented by resorting to a probabilistic scheme as recently proposed and demonstrated in refs [6 - 8]. These amplifiers are based on highly non-classical resources in a complex interferometer. Here we demonstrate a probabilistic quantum amplifier beating the fundamental quantum limit utilizing a thermal noise source and a photon number subtraction scheme […
Loss and decoherence are a major problem in the transmission of non-classical states of light over large distances. It was recently shown that the effects of decoherence can be reduced by applying a probabilistic noiseless attenuator before transmitting a quantum state through a lossy channel, followed by probabilistic noiseless amplification (M. Micuda et al, Phys. Rev. Lett. 109, 180503 (2012)). Here we show that similar results can be obtained for certain kinds of macroscopic quantum states by squeezing the signal before transmission, followed by deterministic amplification and anti-squeezi…
A universal deterministic noiseless quantum amplifier has been shown to be impossible. However, probabilistic noiseless amplification of a certain set of states is physically permissible. Regarding quantum state amplification as quantum state transformation, we show that deterministic noiseless amplification of coherent states chosen from a proper set is possible. The relation between input coherent states and gain of amplification for deterministic noiseless amplification is thus derived. Besides, the potential applications of amplification of coherent states in quantum key distribution (QKD)…
Quantum-limited amplifiers increase the amplitude of quantum signals at the price of introducing additional noise. Quantum purification protocols operate in the reverse way, by reducing the noise while attenuating the signal. Here we investigate a scenario that interpolates between these two extremes. We search for the optimal physical process that generates $M$ approximate copies of pure and amplified coherent state, starting from $N$ copies of a noisy coherent state with Gaussian modulation. We prove that the optimal deterministic processes are always Gaussian, whereas non-Gaussianity powers…
We introduce the concept of non-deterministic noiseless linear amplification. We propose a linear optical realization of this transformation that could be built with current technology. We discuss two applications; ideal probabilistic cloning of coherent states and distillation of continuous variable entanglement. For the latter example we demonstrate that highly pure entanglement can be distilled from transmission over a lossy channel.
We examine the behavior of non-Gaussian states of light under the action of probabilistic noiseless amplification and attenuation. Surprisingly, we find that the mean field amplitude may decrease in the process of noiseless amplification -- or increase in the process of noiseless attenuation, a counterintuitive effect that Gaussian states cannot exhibit. This striking phenomenon could be tested with experimentally accessible non-Gaussian states, such as single-photon added coherent states. We propose an experimental scheme, which is robust with respect to the major experimental imperfections s…
When measuring phase of quantum states of light, the optimal single-shot measurement implements projection on the un-physical phase states. If we want to improve the precision further we need to accept a reduced probability of success, either by implementing a probabilistic measurement or by probabilistically manipulating the measured quantum state by means of noiseless amplification. We analyze the limits of this approach by finding the optimal probabilistic measurement which, for a given rate of success, maximizes the precision with which the phase can be measured.
Probabilistic amplification through photon addition, at the output of an Mach-Zehnder interferometer is discussed for a coherent input state. When a metric of signal to noise ratio is considered, nondeterministic, noiseless amplification of a coherent state shows improvement over a standard coherent state, for the general addition of $m$ photons. The efficiency of realizable implementation of photon addition is also considered and shows how the collected statistics of a post selected state, depend on this efficiency. We also consider the effects of photon loss and inefficient detectors.
We propose a measurement-based method to produce a maximally-entangled state from a partially-entangled pure state. Our goal can be thought of as entanglement distillation from a single copy of a partially-entangled state. The present approach involves local two-outcome weak measurements. We show that application of these local weak measurements leads to a probabilistic amplification of entanglement. In addition, we examine how the probability to find the maximally-entangled state is related to the entanglement of the input state. We also study the application of our method to a mixed initial …
Amplification of quantum states is inevitably accompanied with the introduction of noise at the output. For protocols that are probabilistic with heralded success, noiseless linear amplification in theory may still possible. When the protocol is successful, it can lead to an output that is a noiselessly amplified copy of the input. When the protocol is unsuccessful, the output state is degraded and is usually discarded. Probabilistic protocols may improve the performance of some quantum information protocols, but not for metrology if the whole statistics is taken into consideration. We calcula…
We propose two probabilistic entanglement concentration schemes for a single copy of two-mode squeezed vacuum state. The first scheme is based on the off-resonant interaction of a Rydberg atom with the cavity field while the second setup involves the cross Kerr interaction, auxiliary mode prepared in a strong coherent state and a homodyne detection. We show that the continuous-variable entanglement concentration allows us to improve the fidelity of teleportation of coherent states.
Quantum target detection aims to utilise quantum technologies to achieve performances in target detection not possible through purely classical means. Quantum illumination is an example of this, based on signal-idler entanglement, promising a potential 6 dB advantage in error exponent over its optimal classical counterpart. So far, receiver designs achieving this optimal reception remain elusive with many proposals based on Gaussian processes appearing unable to utilise quantum information contained within Gaussian state sources. This paper considers the employment of a noiseless linear amplif…
We consider a generalized quantum teleportation protocol for an unknown qubit using non-maximally entangled state as a shared resource. Without recourse to local filtering or entanglement concentration, using standard Bell-state measurement and classical communication one cannot teleport the state with unit fidelity and unit probability. We show that using non-maximally entangled measurements one can teleport an unknown state with unit fidelity albeit with reduced probability, hence probabilistic teleportation. We also give a generalized protocol for entanglement swapping using non-maximally e…
We establish the ultimate quantum limits to the amplification of an unknown coherent state, both in the deterministic and probabilistic case, investigating the realistic scenario where the expected photon number is finite. In addition, we provide the benchmark that experimental realizations have to surpass in order to beat all classical amplification strategies and to demonstrate genuine quantum amplification. Our result guarantees that a successful demonstration is in principle possible for every finite value of the expected photon number.
We show that the use of probabilistic noiseless amplification in entangled coherent state-based schemes for the test of quantum non locality provides substantial advantages. The threshold amplitude to falsify a Bell-CHSH non locality test, in fact, is significantly reduced when amplification is embedded into the test itself. Such a beneficial effect holds also in the presence of detection-inefficiency. Our study helps in affirming noiseless amplification as a valuable tool for coherent information processing and the generation of strongly non classical states of bosonic systems.
Noise is the price to pay when trying to clone or amplify arbitrary quantum states. The quantum noise associated to linear phase-insensitive amplifiers can only be avoided by relaxing the requirement of a deterministic operation. Here we present the experimental realization of a probabilistic noiseless linear amplifier that is able to amplify coherent states at the highest level of effective gain and final state fidelity ever reached. Based on a sequence of photon addition and subtraction, and characterized by a significant amplification and low distortions, this high-fidelity amplification sc…
We propose and investigate an optical scheme for probabilistic implementation of an arbitrary single-mode quantum operation that can be expressed as a function of photon number operator. The scheme coherently combines multiple photon addition and subtraction and is feasible with current technology. As concrete examples, we demonstrate that the device can perform approximate noiseless linear amplification of light and can emulate Kerr nonlinearity.
Due to the pervasive nature of decoherence, protection of quantum information during transmission is of critical importance for any quantum network. A linear amplifier that can enhance quantum signals stronger than their associated noise while preserving quantum coherence is therefore of great use. This seemingly unphysical amplifier property is achievable for a class of probabilistic amplifiers that does not work deterministically. Here we present a linear amplification scheme that realises this property for coherent states by combining a heralded measurement-based noiseless linear amplifier …
