Wolfgang Bein, Leah Epstein, Lawrence L. Larmore, John Noga
We consider the online list s-batch problem, where all the jobs have processing time 1 and we seek to minimize the sum of the completion times of the jobs. We give a Java program which is used to verify that the competitiveness of this problem is 619/583.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
In this paper we study a proportionate flow shop of batching machines with release dates and a fixed number $m \geq 2$ of machines. The scheduling problem has so far barely received any attention in the literature, but recently its importance has increased significantly, due to applications in the industrial scaling of modern bio-medicine production processes. We show that for any fixed number of machines, the makespan and the sum of completion times can be minimized in polynomial time. Furthermore, we show that the obtained algorithm can also be used to minimize the weighted total completion …
Online scheduling in identical machines with makespan minimization has been a well studied research problem in the literature. In online scheduling, the scheduler receives a list of jobs one by one and assigns each incoming job on the fly irrevocably to one of the machines before the arrival of the next job. In this paper, we study a variant of the online scheduling problem, where jobs are requested on the fly from k distinct sources. On simultaneous arrival of jobs from multiple sources, it is a non-trivial research challenge to ensure fairness in scheduling with respect to distinct sources, …
The scheduling literature has traditionally focused on a single type of resource (e.g., computing nodes). However, scientific applications in modern High-Performance Computing (HPC) systems process large amounts of data, hence have diverse requirements on different types of resources (e.g., cores, cache, memory, I/O). All of these resources could potentially be exploited by the runtime scheduler to improve the application performance. In this paper, we study multi-resource scheduling to minimize the makespan of computational workflows comprised of parallel jobs subject to precedence constraint…
We consider online scheduling on multiple machines for jobs arriving one-by-one with the objective of minimizing the makespan. For any number of identical parallel or uniformly related machines, we provide a competitive-ratio approximation scheme that computes an online algorithm whose competitive ratio is arbitrarily close to the best possible competitive ratio. We also determine this value up to any desired accuracy. This is the first application of competitive-ratio approximation schemes in the online-list model. The result proves the applicability of the concept in different online models.…
In this paper we consider the open shop scheduling problem where the jobs have delivery times. The minimization criterion is the maximum lateness of the jobs. This problem is known to be NP-hard, even restricted to only 2 machines. We establish that any list scheduling algorithm has a performance ratio of 2. For a fixed number of machines, we design a polynomial time approximation scheme (PTAS) which represents the best possible result due to the strong NP-hardness of the problem.
We consider the classical online scheduling problem P||C_{max} in which jobs are released over list and provide a nearly optimal online algorithm. More precisely, an online algorithm whose competitive ratio is at most (1+ε) times that of an optimal online algorithm could be achieved in polynomial time, where m, the number of machines, is a part of the input. It substantially improves upon the previous results by almost closing the gap between the currently best known lower bound of 1.88 (Rudin, Ph.D thesis, 2001) and the best known upper bound of 1.92 (Fleischer, Wahl, Journal of Scheduling, 2…
Online algorithm has been an emerging area of interest for researchers in various domains of computer science. The online $m$-machine list scheduling problem introduced by Graham has gained theoretical as well as practical significance in the development of competitive analysis as a performance measure for online algorithms. In this paper, we study and explore the performance of Graham's online \textit{list scheduling algorithm(LSA)} for independent jobs. In the literature, \textit{LSA} has already been proved to be $2-\frac{1}{m}$ competitive, where $m$ is the number of machines. We present t…
We consider the Pm || Cmax scheduling problem where the goal is to schedule n jobs on m identical parallel machines to minimize makespan. We revisit the famous Longest Processing Time (LPT) rule proposed by Graham in 1969. LPT requires to sort jobs in non-ascending order of processing times and then to assign one job at a time to the machine whose load is smallest so far. We provide new insights on LPT and discuss the approximation ratio of a modification of LPT that improves Graham's bound from 4/3 - 1/(3m) to 4/3 - 1/(3(m-1)) for m >= 3 and from 7/6 to 9/8 for m = 2. We use Linear Programmin…
A simpler QPTAS for scheduling jobs with precedence constraints
针对带优先约束的单位作业并行调度问题，本文提出一种更简单的QPTAS，通过猜测最优解中特定作业位置、子区间递归及贪心填充实现，无需LP层级等复杂技术，分析更易懂。
We consider the classic problem of scheduling jobs with precedence constraints on identical machines to minimize makespan, in the presence of communication delays. In this setting, denoted by $\mathsf{P} \mid \mathsf{prec}, c \mid C_{\mathsf{max}}$, if two dependent jobs are scheduled on different machines, then at least $c$ units of time must pass between their executions. Despite its relevance to many applications, this model remains one of the most poorly understood in scheduling theory. Even for a special case where an unlimited number of machines is available, the best known approximation…
In the scheduling with non-uniform communication delay problem, the input is a set of jobs with precedence constraints. Associated with every precedence constraint between a pair of jobs is a communication delay, the time duration the scheduler has to wait between the two jobs if they are scheduled on different machines. The objective is to assign the jobs to machines to minimize the makespan of the schedule. Despite being a fundamental problem in theory and a consequential problem in practice, the approximability of scheduling problems with communication delays is not very well understood. On…
Makespan minimization on parallel identical machines is a classical and intensively studied problem in scheduling, and a classic example for online algorithm analysis with Graham's famous list scheduling algorithm dating back to the 1960s. In this problem, jobs arrive over a list and upon an arrival, the algorithm needs to assign the job to a machine. The goal is to minimize the makespan, that is, the maximum machine load. In this paper, we consider the variant with an additional cardinality constraint: The algorithm may assign at most $k$ jobs to each machine where $k$ is part of the input. W…
Minimizing Completion Times of Stochastic Jobs on Parallel Machines is Hard
本文证明了在并行机器上最小化随机作业完成时间的难题，展示了该问题的内在不可处理性。
Single-Machine Scheduling with Interval Predictions and Costly Preemption
针对加工时间未知且带报告区间的单机调度问题，提出几何回退策略，推导最坏情况系数并给出最优深度选择，为区间预测提供性能保证。
We provide new (parameterized) computational hardness results for Interval Scheduling on Unrelated Machines. It is a classical scheduling problem motivated from just-in-time or lean manufacturing, where the goal is to complete jobs exactly at their deadline. We are given $n$ jobs and $m$ machines. Each job has a deadline, a weight, and a processing time that may be different on each machine. The goal is find a schedule that maximized the total weight of jobs completed exactly at their deadline. Note that this uniquely defines a processing time interval for each job on each machine. Interval Sc…
Approximation Algorithms for Fair Repetitive Scheduling
本文提出两种近似算法，分别针对日依赖和日不变的任务处理时间，以解决公平重复调度问题，实现多项式时间内的近似最优解。
Competitive Non-Clairvoyant KV-Cache Scheduling for LLM Inference
本文提出非clairvoyant的几何切片算法（GSA）和clairvoyant的几何批处理算法（GBA），在LLM推理中实现首个常数竞争比，显著提升性能界。
In a classical problem in scheduling, one has $n$ unit size jobs with a precedence order and the goal is to find a schedule of those jobs on $m$ identical machines as to minimize the makespan. It is one of the remaining four open problems from the book of Garey & Johnson whether or not this problem is $\mathbf{NP}$-hard for $m=3$. We prove that for any fixed $\varepsilon$ and $m$, an LP-hierarchy lift of the time-indexed LP with a slightly super poly-logarithmic number of $r = (\log(n))^{Θ(\log \log n)}$ rounds provides a $(1 + \varepsilon)$-approximation. For example Sherali-Adams suffices as…
The stable allocation problem is a many-to-many generalization of the well-known stable marriage problem, where we seek a bipartite assignment between, say, jobs (of varying sizes) and machines (of varying capacities) that is "stable" based on a set of underlying preference lists submitted by the jobs and machines. We study a natural "unsplittable" variant of this problem, where each assigned job must be fully assigned to a single machine. Such unsplittable bipartite assignment problems generally tend to be NP-hard, including previously-proposed variants of the unsplittable stable allocation p…
Shortest Remaining Processing Time (SRPT) is a well known preemptive scheduling algorithm for uniprocessor and multiprocessor systems. SRPT finds applications in the emerging areas such as scheduling of client's requests that are submitted to a web server for accessing static web pages, managing the access requests to files in multiuser database systems and routing of packets across several links as per bandwidth availability in data communications. SRPT has been proved to be optimal for the settings, where the objective is to minimize the mean response time of a list of jobs. According to our…
In 1976, Coffman and Sethi conjectured that a natural extension of LPT list scheduling to the bicriteria scheduling problem of minimizing makespan over flowtime optimal schedules, called LD algorithm, has a simple worst-case performance bound: (5m-2)/(4m-1), where m is the number of machines. We study structure of potential minimal counterexamples to this conjecture and prove that the conjecture holds for the cases (i) n > 5m, (ii) m = 2, (iii) m = 3, and (iv) m greater than or equal to 4, n less than or equal to 3m, where n is the number of jobs. We further conclude that to verify the conject…
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。