We theoretically demonstrate high Quality factor micropillar cavities with record low mode volumes based on the TiO2/SiO2 material system. The proposed cavities have Q/V three orders of magnitude larger than previously reported ones. We show that our cavity embedded with diamond nanocrystal provides a feasible platform for cavity quantum electrodynamics experiments in the strong coupling limit.
An imaging technique is presented that enables monitoring of the wet thermal oxidation of a thin AlAs layer embedded between two distributed Bragg reflector (DBR) mirrors in a micropillar. After oxidation we confirm by white light reflection spectroscopy that high quality optical modes confined to a small volume have been formed. The combination of these two optical techniques provides a reliable and efficient way of producing oxide apertured micropillar cavities for which the wet thermal oxidation is a critical fabrication step.
The coupling of CdTe/ZnTe quantum dot (QD) emission to micropillar cavity eigenmodes in the weak coupling regime is demonstrated. We analyze photoluminescence spectra of QDs embedded in monolithic micropillar cavities based on Bragg mirrors which contain MgSe/ZnTe/MgTe superlattices as low-index material. The pillar emission shows pronounced cavity eigenmodes and their spectral shape is in good agreement with simulations. QD emission in resonance with the cavity mode is shown to be efficiently guided toward the detector and an experimental Purcell enhancement by a factor of 5.7 is determined, …
We present a detailed experimental characterization of the spectral and spatial structure of the confined optical modes for oxide-apertured micropillar cavities, showing good-quality Hermite-Gaussian profiles, easily mode-matched to external fields. We further derive a relation between the frequency splitting of the transverse modes and the expected Purcell factor. Finally, we describe a technique to retrieve the profile of the confining refractive index distribution from the spatial profiles of the modes.
We have performed white-light reflectivity measurements on GaAs/AlAs micropillar cavities with diameters ranging from 1 μm up to 20 μm. We are able to resolve the spatial field distribution of each cavity mode in real space by scanning a small-sized beam across the top facet of each micropillar. We spectrally resolve distinct transverse optical cavity modes in reflectivity. Using this procedure we can selectively address a single mode in the multimode micropillar cavity. Calculations for the coupling efficiency of a small-diameter beam to each mode are in very good agreement with our reflectiv…
A method for fabrication of polarization degenerate oxide apertured micropillar cavities is demon- strated. Micropillars are etched such that the size and shape of the oxide front is controlled. The polarization splitting in the circular micropillar cavities due to the native and strain induced bire- fringence can be compensated by elongating the oxide front in the [110] direction, thereby reducing stress in this direction. By using this technique we fabricate a polarization degenerate cavity with a quality factor of 1.7*?10^4 and a mode volume of 2.7 u?m3, enabling a calculated maximum Purcel…
Microcavity polaritons are bosonic light-matter particles that can emit coherent radiation without electronic population inversion via bosonic scattering. This phenomenon, known as polariton lasing, strongly depends on the polaritons' confinement. Shrinking the polaritons' mode volume increases the interactions mediated by their excitonic part, and thereby the density-dependent blueshift of the polariton to a higher energy is enhanced. Previously, polariton lasing has been demonstrated in micropillars with diameters larger than three microns, in grating based cavities, fiber cavities and photo…
We demonstrate a technique to tune the optical properties of micropillar cavities by creating small defects on the sample surface near the cavity region with an intense focused laser beam. Such defects modify strain in the structure, changing the birefringence in a controllable way. We apply the technique to make the fundamental cavity mode polarization-degenerate and to fine tune the overall mode frequencies, as needed for applications in quantum information science.
We report optical positioning single quantum dots (QDs) in planar cavity with an average position uncertainty $<$20 nm using an optimized two-color photoluminescence imaging technique. We create single-photon sources based on these QDs in determined micropillar cavities. The brightness of the QD fluorescence is greatly enhanced on resonance with the fundamental mode of the cavity, leading to an high extraction efficiency of 68%$\pm$6% into a lens with numerical aperture of 0.65, and simultaneously exhibiting low multi-photon probability ($g^{2}(0)$=0.144$\pm$0.012) at this collection efficienc…
A complete integrated table-top facility for the study of high-$Q$ Whispering Gallery Modes in solid and liquid micro-cavities is described, with emphasis on the in situ fabrication of reliable tapered fibers of sub-micron waist sizes for coupling light into time-dependent liquid micro-cavities. The experimental parameters have been chosen to get nearly adiabatic tapers, with their waist size consistent with the theoretical model. The oscillations in the transmitted power during fiber tapering are monitored to check the coupling of higher order modes and identify the point when the fiber is su…
The engineering of localised modes in photonic structures is one of the main targets of modern photonics. An efficient strategy to design these modes is to use the interplay of constructive and destructive interference in periodic photonic lattices. This mechanism is at the origin of defect modes in photonic bandgaps, bound states in the continuum and compact localised states in flat bands. Here we show that in lattices of lossy resonators, the addition of external optical drives with controlled phase enlarges the possibilities of manipulating interference effects and allows designing novel ty…
Micron-scale optical cavities are produced using a combination of template sphere self-assembly and electrochemical growth. Transmission measurements of the tunable microcavities show sharp resonant modes with a Q-factor>300, and 25-fold local enhancement of light intensity. The presence of transverse optical modes confirms the lateral confinement of photons. Calculations show sub-micron mode volumes are feasible. The small mode volume of these microcavities promises to lead to a wide range of applications in microlasers, atom optics, quantum information, biophotonics and single molecule detec…
In this paper we study and design quasi-2D optomechanical crystals, waveguides, and resonant cavities formed from patterned slabs. Two-dimensional periodicity allows for in-plane pseudo-bandgaps in frequency where resonant optical and mechanical excitations localized to the slab are forbidden. By tailoring the unit cell geometry, we show that it is possible to have a slab crystal with simultaneous optical and mechanical pseudo-bandgaps, and for which optical waveguiding is not compromised. We then use these crystals to design optomechanical cavities in which strongly interacting, co-localized …
We propose and analyze a family of nanoscale cavities for electrically-pumped surface-emitting semiconductor lasers that use surface plasmons to provide optical mode confinement in cavities which have dimensions in the 100-300 nm range. The proposed laser cavities are in many ways nanoscale optical versions of micropatch antennas that are commonly used at microwave/RF frequencies. Surface plasmons are not only used for mode confinement but also for output beam shaping to realize single-lobe far-field radiation patterns with narrow beam waists from subwavelength size cavities. We identify the c…
Acoustic-graphene-plasmons (AGPs) are highly confined electromagnetic modes, carrying large momentum and low loss in the mid-infrared/Terahertz spectra. Owing to their ability to confine light to extremely small dimensions, they bear great potential for ultra-strong light-matter interactions in this long wavelength regime, where molecular fingerprints reside. However, until now AGPs have been restricted to micron-scale areas, reducing their confinement potential by several orders-of-magnitude. Here, by utilizing a new type of graphene-based magnetic-resonance, we realize single, nanometric-sca…
Integrated optomechanical cavities stand as a promising means to interface mechanical motion and guided optical modes. State-of-the-art demonstrations rely on optical and mechanical modes tightly confined of in micron-scale areas to achieve strong optomechanical coupling. However, the need for tight optomechanical confinement and the general use of suspended devices hinders interaction with external devices, limiting the potential for the implementation of complex circuits. Here, we propose and demonstrate a new approach for optomechanical cavities coupling free-propagating surface acoustic wa…
The quality factor (Q), mode volume (Veff), and room-temperature lasing threshold of microdisk cavities with embedded quantum dots (QDs) are investigated. Finite element method simulations of standing wave modes within the microdisk reveal that Veff can be as small as 2(lambda/n)^3 while maintaining radiation-limited Qs in excess of 10^5. Microdisks of diameter D=2 microns are fabricated in an AlGaAs material containing a single layer of InAs QDs with peak emission at lambda = 1317 nm. For devices with Veff ~2 (lambda/n)^3, Qs as high as 1.2 x 10^5 are measured passively in the 1.4 micron band…
Optical characterization of AlGaAs microdisk resonant cavities with a quantum dot active region is presented. Direct passive measurement of the optical loss within AlGaAs microdisk resonant structures embedded with InAs/InGaAs dots-in-a-well (DWELL) is performed using an optical-fiber-based probing technique at a wavelength (lambda~1400 nm) that is red-detuned from the dot emission wavelength (lambda~1200 nm). Measurements in the 1400 nm wavelength band on microdisks of diameter D = 4.5 microns show that these structures support modes with cold-cavity quality factors as high as 360,000. DWELL-…
We have developed a range of theoretical and numerical techniques for modeling the multi-mode, 210-34 micron, ultra-low-noise Transition Edge Sensors that will be used on the SAFARI instrument on the ESA/JAXA cooled-aperture FIR space telescope SPICA. The models include a detailed analysis of the resistive and reactive properties of thin superconducting absorbing films, and a partially coherent mode-matching analysis of patterned films in multi-mode waveguide. The technique allows the natural optical modes, modal responsivities, and Stokes maps of complicated structures comprising patterned fi…
Measured and calculated results are presented on the emission properties of a new class of emitters operating in the cavity quantum electrodynamics regime. The structures are based on high-finesse GaAs/AlAs micropillar cavities, each with an active medium consisting of a layer of InGaAs quantum dots and distinguishing feature of having substantial fraction of spontaneous emission channeled into one cavity mode (high-beta factor). This paper shows that the usual criterion for lasing with a conventional (low-beta factor) cavity, a sharp nonlinearity in an input-output curve accompanied by notice…
We review a novel method for characterizing both the spectral and spatial properties of resonant cavities within two-dimensional photonic crystals (PCs). An optical fiber taper serves as an external waveguide probe whose micron-scale field is used to source and couple light from the cavity modes, which appear as resonant features in the taper's wavelength-dependent transmission spectrum when it is placed within the cavity's near field. Studying the linewidth and depth of these resonances as a function of the taper's position with respect to the resonator produces quantitative measurements of t…
A cavity array microscope for parallel single-atom interfacing
Stanford University（斯坦福大学）；Stony Brook University（纽约州立大学石溪分校）；The University of Chicago（芝加哥大学）；Harvard University（哈佛大学）；Montana State University（蒙大拿州立大学）
