Optical configuration and analysis of the AMBER/VLTI instrument
S. Robbe-Dubois, S. Lagarde, R. G. Petrov, F. Lisi, U. Beckmann, P. Antonelli, Y. Bresson, G. Martinot-Lagarde, A. Roussel, P. Salinari, M. Vannier, A. Chelli, … 展开作者
S. Robbe-Dubois, S. Lagarde, R. G. Petrov, F. Lisi, U. Beckmann, P. Antonelli, Y. Bresson, G. Martinot-Lagarde, A. Roussel, P. Salinari, M. Vannier, A. Chelli, M. Dugue, G. Duvert, S. Gennari, L. Gluck, P. Kern, E. LeCoarer, F. Malbet, F. Millour, K. Perraut, P. Puget, F. Rantakyro, E. Tatulli, G. Weigelt, G. Zins
This paper describes the design goals and engineering efforts that led to the realization of AMBER (Astronomical Multi BEam combineR) and to the achievement of its present performance.
On the basis of the general instrumental concept, AMBER was decomposed into modules whose functions and detailed characteristics are given. Emphasis is put on the spatial filtering system, a key element of the instrument. We established a budget for transmission and contrast degradation through the different modules, and made the detailed optical design. The latter confirmed the overall performance of the instrument and defined the exact implementation of the AMBER optics.
The performance was assessed with laboratory measurements and commissionings at the VLTI, in terms of spectral coverage and resolution, instrumental contrast higher than 0.80, minimum magnitude of 11 in K, absolute visibility accuracy of 1%, and differential phase stability of 1E-3 rad over one minute.
We present the current performances of the AMBER / VLTI instrument in terms of differential observables (differential phase and differential visibility) and show that we are already able to reach a sufficient precision for very low mass companions spectroscopy and mass characterization. We perform some extrapolations with the knowledge of the current limitations of the instrument facility. We show that with the current setup of the AMBER instrument, we can already reach $3σ= 10^{-3}$ radians and have the potential to some low mass companions characterization (Brown dwarves or hypothetical very…
The AMBER instrument installed at the Very Large Telescope (VLT) combines three beams from as many telescopes to produce spectrally dispersed fringes from milli-arcsecond angular scale in the near infrared. Two years after installation, first scientific observations have been carried out during the Science Demonstration Time and the Guaranteed Time mostly on bright sources due to some VLTI limitations. In this paper, we review these first astrophysical results and we show which types of completely new information is brought by AMBER. The first astrophysical results have been mainly focusing on…
Our goal is to demonstrate the potential of the interferometric AMBER instrument linked with the Very Large Telescope Interferometer (VLTI) fringe-tracking facility FINITO to derive high-precision stellar diameters. We use commissioning data obtained on the bright single star V3879 Sgr. Locking the interferometric fringes with FINITO allows us to record very low contrast fringes on the AMBER camera. By fitting the amplitude of these fringes, we measure the diameter of the target in three directions simultaneously with an accuracy of 25 micro-arcseconds. We showed that V3879 Sgr has a round pho…
AIMS: We have found that the interferometric visibilities of VLTI-AMBER observations, extracted via the standard reduction package, are significantly biased when faint targets are concerned. The visibility biases derive from a time variable fringing effect (correlated noise) appearing on the detector. METHODS: We have developed a method to correct this bias that consists in a subtraction of the extra power due to such correlated noise, so that the real power spectrum at the spatial frequencies of the fringing artifact can be restored. RESULTS: This pre-processing procedure is implemented in a …
AMBER is the General User near-infrared focal instrument of the Very Large Telescope interferometer. Its specifications are based on three key programs on Young Stellar Objects, Active Galactic Nuclei central regions, masses and spectra of hot Extra Solar Planets. It has an imaging capacity because it combines up to three beams and very high accuracy measurement are expected from the spatial filtering of beams by single mode fibers and the comparison of measurements made simultaneously in different spectral channels.
AMBER is the first near infrared focal instrument of the VLTI. It combines three telescopes and produces spectrally resolved interferometric measures. This paper discusses some preliminary results of the first scientific observations of AMBER with three Unit Telescopes at medium (1500) and high (12000) spectral resolution. We derive a first set of constraints on the structure of the circumstellar material around the Wolf Rayet Gamma2 Velorum and the LBV Eta Carinae.
We present the first high spatial and spectral observations of the circumstellar envelope (CSE) of a B[e] supergiant (CPD$-57 2874$), performed with the Very Large Telescope Interferometer (VLTI). Spectra, visibilities, and closure phase, were obtained using the beam-combiner instruments AMBER (near-IR interferometry with three 8.3 m Unit Telescopes or UTs) and MIDI (mid-IR interferometry with two UTs). The interferometric observations of the CSE are well fitted by an elliptical Gaussian model with FWHM diameters varying linearly with wavelength. Typical diameters measured are $\simeq1.8\times…
We present here the current performances of the AMBER / VLTI instrument for standard use and compare these with the offered modes of the instrument. We show that the instrument is able to reach its specified precision only for medium and high spectral resolution modes, differential observables and bright objects. For absolute observables, the current achievable accuracy is strongly limited by the vibrations of the Unit Telescopes, and also by the observing procedure which does not take into account the night-long transfer function monitoring. For low-resolution mode, the current limitation is …
We investigate the origin of the $\mathrm{Br}γ$ emission of the Herbig Ae star HD104237 on Astronomical Unit (AU) scales. Using AMBER/VLTI at a spectral resolution R=1500 spatially resolve the emission in both the BrGamma line and the adjacent continuum. The visibility does not vary between the continuum and the BrGamma line, even though the line is strongly detected in the spectrum, with a peak intensity 35% above the continuum. This demonstrates that the line and continuum emission have similar size scales. We assume that the K-band continuum excess originates in a ``puffed-up'' inner rim of…
We present in this paper an innovative data reduction method for single-mode interferometry. It has been specifically developed for the AMBER instrument, the three-beam combiner of the Very Large Telescope Interferometer, but can be derived for any single-mode interferometer. The algorithm is based on a direct modelling of the fringes in the detector plane. As such, it requires a preliminary calibration of the instrument in order to obtain the calibration matrix which builds the linear relationship between the interferogram and the interferometric observable, that is the complex visibility. On…
We study the Be star $δ$ Cen circumstellar disk using long-baseline interferometry which is the only observing technique capable of resolving spatially and spectroscopically objects smaller than 5 mas in the H and K b and. We used the VLTI/AMBER instrument on January 6, 8, and 9, 2008, in the H and K bands to complete low (35) and medium (150 0) spectral resolution observations. We detected an oscillation in the visibility curve plotted as a function of the spatial frequency which is a clear signat ure of a companion around $δ$ Cen. Our best-fit soltution infers a binary separation of 68.7 mas…
We have used near- and mid-infrared interferometry to investigate the pulsating atmosphere and the circumstellar environment of the Mira variable RR Aql. Observations were taken with the VLTI/AMBER (near infrared) and the VLTI/MIDI (mid infrared) instruments. We have obtained a total of 15 MIDI epochs between Apr 9, 2004 and Jul 28, 2007 covering 4 pulsation cycles and one AMBER epoch on Sep 9, 2006 at phase 2.82. This work is also part of an ongoing project of joint VLTI and VLBA observations to study the connection between stellar pulsation and the mass loss process. Here we present a compar…
The paper investigates the milli-arcsecond scale structure of the present-day mass-loss of the post-Red Supergiant IRC+10420. We use three telescopes of the VLT Interferometer in combination with the AMBER near-infrared beam combiner to measure spectrally dispersed correlated fluxes in the K-band around the Br gamma transition. The resulting visibilities are compared to the predicted visibilities of emission structures with various simple models in order to infer the size of the observed emission region. The Br gamma line is resolved by VLTI+AMBER on all three baselines, with the maximum proje…
The young stellar object MWC297 is a B1.5Ve star exhibiting strong hydrogen emission lines. This object has been observed by the AMBER/VLTI instrument in 2-telescope mode in a sub-region of the K spectral band centered around the Br gamma line at 2.1656 microns. The object has not only been resolved in the continuum with a visibility of 0.50+/-0.10, but also in the Br gamma line, where the flux is about twice larger, with a visibility about twice smaller (0.33+/-0.06). The continuum emission is consistent with the expectation of an optically thick thermal emission from dust in a circumstellar …
We studied the geometry of the inner (AU-scale) circumstellar environment around the Herbig Be star MWC 147. Combining, for the first time, near- (NIR, K band) and mid-infrared (MIR, N band) spectro-interferometry on a Herbig star, our VLTI/MIDI and AMBER data constrain not only the geometry of the brightness distribution, but also the radial temperature distribution in the disk. For our detailed modeling of the interferometric data and the spectral energy distribution, we employ 2-D radiation transfer simulations, showing that passive irradiated Keplerian dust disks can easily fit the SED, bu…
Aims. We aim to study the geometry and kinematics of the disk around the Be star $α$ Arae as a function of wavelength, especially across the Br$γ$ emission line. The main purpose of this paper is to answer the question about the nature of the disk rotation around Be stars. Methods. We use the VLTI/AMBER instrument operating in the K band which provides a gain by a factor 5 in spatial resolution compared to previous VLTI/MIDI observations. Moreover, it is possible to combine the high angular resolution provided with the (medium) spectral resolution of AMBER to study the kinematics of the inner …
AMBER was installed in March 2004 in the VLTI focal lab of the VLT observatory in Cerro Paranal run by ESO. Since then, there have been 4 commissioning runs and additional VLTI infrastructure installed (IRIS, FINITO and ATs,...), but AMBER is not yet fulfilling all its initial specifications and some important primary science objectives cannot be achieved. At the consortium level, an action plan has been decided in Oct 2007 that created an AMBER Task Force (ATF) to understand and possibly cure the eventual technical issues. The objectives of the February 2008 run was mainly to bring AMBER into…
The first astrophysical results of the VLTI focal instrument AMBER have shown the importance of the differential and closure phase measures, which are supposed to be much less sensitive to atmospheric and instrumental biases than the absolute visibility. However there are artifacts limiting the accuracy of these measures which can be substantially overcome by a specific calibration technique called Beam Commutation. This paper reports the observed accuracies on AMBER/VLTI phases in different modes, discusses some of the instrumental biases and shows the accuracy gain provided by Beam Commutati…
Aims. We study the geometry and kinematics of the circumstellar environment of the Be star Kappa CMa in the Br gamma emission line and its nearby continuum. Methods. We use the VLTI/AMBER instrument operating in the K band which provides a spatial resolution of about 6 mas with a spectral resolution of 1500 to study the kinematics within the disk and to infer its rotation law. In order to obtain more kinematical constraints we also use an high spectral resolution Pa beta line profile obtain in December 2005 at the Observatorio do Pico do Dios, Brazil and we compile V/R line profile variations …
We present the first spectro-interferometric observations of the circumstellar envelope (CSE) of a B[e] supergiant (CPD -57 2874), performed with the Very Large Telescope Interferometer (VLTI) using the beam-combiner instruments AMBER (near-IR interferometry with three 8.3 m Unit Telescopes or UTs) and MIDI (mid-IR interferometry with two UTs). Our observations of the CSE are well fitted by an elliptical Gaussian model with FWHM diameters varying linearly with wavelength. Typical diameters measured are $\simeq1.8\times3.4$ mas or $\simeq4.5\times8.5$ AU (adopting a distance of 2.5 kpc) at $2.2…
Massive stars deeply influence their surroundings by their luminosity and the injection of kinetic energy. So far, they have mostly been studied with spatially unresolved observations, although evidence of geometrical complexity of their wind are numerous. Interferometry can provide spatially resolved observations of massive stars and their immediate vicinity. Specific geometries (disks, jets, latitude-dependent winds) can be probed by this technique. The first observation of a Wolf-Rayet (WR) star (γ^2 Vel) with the AMBER/VLTI instrument yielded to a re-evaluation of its distance and an impro…
The young stellar object MWC 297 has been observed with the VLT interferometer equipped with the AMBER instrument. MWC 297 has been spatially resolved in the continuum with a visibility of 0.50 as well as in the Br gamma emission line where the visibility decrease to a lower value of 0.33. This change in the visibility with the wavelength can be interpreted by the presence of an optically thick disk responsible for the visibility in the continuum and of a stellar wind traced by Br gamma and whose apparent size is 40% larger. We validate this interpretation by building a model of the stellar en…
Differential phase observations with a near-IR interferometer offer a way to obtain spectra of extrasolar planets. The method makes use of the wavelength dependence of the interferometer phase of the planet/star system, which depends both on the interferometer geometry and on the brightness ratio between the planet and the star. The differential phase is strongly affected by instrumental and atmospheric dispersion effects. Difficulties in calibrating these effects might prevent the application of the differential phase method to systems with a very high contrast, such as extrasolar planets. A …
We report on interferometric AMBER/VLTI observations of the recurrent nova RS Oph five days after its outburst on 2006 Feb 12. Using three baselines from 44 to 86m, and a spectral resolution of 1500, we measured the extension of the emission in the K band continuum and in the BrG and HeI2.06 micron lines. The continuum visibilities were interpreted by fitting simple geometric models consisting of uniform and Gaussian ellipses, ring and binary models. The visibilities and differential phases in the BrG line were interpreted using skewed ring models aiming to perform a limited parametric reconst…
We present the first NIR spectro-interferometry of the LBV Eta Carinae. The K band observations were performed with the AMBER instrument of the ESO Very Large Telescope Interferometer using three 8.2m Unit Telescopes with baselines from 42 to 89m. The aim of this work is to study the wavelength dependence of Eta Car's optically thick wind region with a high spatial resolution of 5 mas (11 AU) and high spectral resolution. The medium spectral resolution observations (R=1,500) were performed in the wavelength range around both the HeI 2.059 micron and the Br gamma 2.166 micron emission lines, th…
To trace the accretion and outflow processes around YSOs, diagnostic spectral lines such as the BrG 2.166 micron line are widely used, although due to a lack of spatial resolution, the origin of the line emission is still unclear. Employing the AU-scale spatial resolution which can be achieved with infrared long-baseline interferometry, we aim to distinguish between theoretical models which associate the BrG line emission with mass infall or mass outflow processes. Using the VLTI/AMBER instrument, we spatially and spectrally (R=1500) resolved the inner environment of five Herbig Ae/Be stars (H…
In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primari…
Interferometry in the optical and near infrared has so far played a marginal role in Extragalactic Astronomy. Active Galactic Nuclei are the brightest and most compact extragalactic sources, nonetheless only a very limited number could be studied with speckle interferometry and none with long baseline interferometry. The VLTI will allow the study of moderately faint extragalactic objects with very high spatial resolution thus opening a new window on the universe. With this paper we focus on three scientific cases to show how AMBER and MIDI can be used to tackle open issues in extragalactic ast…
The amdlib AMBER data reduction software is meant to produce AMBER data products from the raw data files that are sent to the PIs of different proposals or that can be found in the ESO data archive. The way defined by ESO to calibrate the data is to calibrate one science data file with a calibration one, observed as close in time as possible. Therefore, this scheme does not take into account instrumental drifts, atmospheric variations or visibility-loss corrections, in the current AMBER data processing software, amdlib. In this article, we present our approach to complement this default calibr…
Two of the three instruments proposed to ESO for the second generation instrumentation of the VLTI would use integrated optics for beam combination. Several design are studied, including co-axial and multi-axial recombination. An extensive quantity of combiners are therefore under test in our laboratories. We will present the various components, and the method used to validate and compare the different combiners. Finally, we will discuss the performances and their implication for both VSI and Gravity VLTI instruments.
e present 4 very low mass stars radii measured with the VLTI using the 2.2 microns VINCI test instrument. The observations were carried out during the commissioning of the 104-meter-baseline with two 8-meter-telescopes. We measure angular diameters of 0.7-1.5 mas with accuracies of 0.04-0.11 mas, and for spectral type ranging from M0V to M5.5V. We determine an empirical mass-radius relation for M dwarfs based on all available radius measurements. The observed relation agrees well with theoretical models at the present accuracy level, with possible discrepancy around 0.5-0.8 Msolar that needs t…
We present computer simulations of interferometric imaging with the Very Large Telescope Interferometer (VLTI) of the European Southern Observatory (ESO) and the Astronomical MultiBEam Recombiner (AMBER) phase-closure instrument. These simulations include both the astrophysical modelling of a stellar object by radiative transfer calculations and the simulation of light propagation from the object to the detector (through atmosphere, telescopes, and the AMBER instrument), simulation of photon noise and detector read-out noise, and finally data processing of the interferograms. The results show …
We present computer simulations of interferometric imaging with the VLT interferometer and the AMBER instrument. These simulations include both the astrophysical modelling of a stellar object by radiative transfer calculations and the simulation of light propagation from the object to the detector (through atmosphere, telescopes, and the AMBER instrument), simulation of photon noise and detector read-out noise, and finally data processing of the interferograms. The results show the dependence of the visibility error bars on the following observational parameters: different seeing during the ob…
VLT-Interferometry will allow imaging of the Galactic Center (GC) and the nuclei of extragalactic sources at an angular resolution of a few milliarcseconds. VLTI will be a prime instrument to study the immediate environment of the massive black hole at the center of the Milky Way. With the MID infrared Interferometric instrument (MIDI) for example the enigmatic compact dust embedded MIR-excess sources within the central parsec should be resolvable. Further the observations of external galactic nuclei will allow unprecedented measurements of physical parameters (i.e. structure and luminosity) i…
VLTi Spectro-Imager (VSI) is a proposition for a second generation VLTI instrument which is aimed at providing the ESO community with the capability of performing image synthesis at milli-arcsecond angular resolution. VSI provides the VLTI with an instrument able to combine 4 telescopes in a baseline version and optionally up to 6 telescopes in the near-infrared spectral domain with moderate to high spectral resolution. The instrument contains its own fringe tracker in order to relax the constraints onto the VLTI infrastructure. VSI will do imaging at the milli-arcsecond scale with spectral re…
Classically, optical and near-infrared interferometry have relied on closure phase techniques to produce images. Such techniques allow us to achieve modest dynamic ranges. In order to test the feasibility of next generation optical interferometers in the context of the VLTI-spectro-imager (VSI), we have embarked on a study of image reconstruction and analysis. Our main aim was to test the influence of the number of telescopes, observing nights and distribution of the visibility points on the quality of the reconstructed images. Our results show that observations using six Auxiliary Telescopes …
We present the adaptive optics assisted, near-infrared VLTI instrument - GRAVITY - for precision narrow-angle astrometry and interferometric phase referenced imaging of faint objects. Precision astrometry and phase-referenced interferometric imaging will realize the most advanced vision of optical/infrared interferometry with the VLT. Our most ambitious science goal is to study motions within a few times the event horizon size of the Galactic Center massive black hole and to test General Relativity in its strong field limit. We define the science reference cases for GRAVITY and derive the top …
The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide intermediate to high spectral resolutions and eventually polarization analysis. This paper summarizes the result from the concept study led within the Joint Research Activity advanced instruments of the OPTI…
We present the proposal for the infrared adaptive optics (AO) assisted, two-object, high-throughput, multiple-beam-combiner GRAVITY for the VLTI. This instrument will be optimized for phase-referenced interferometric imaging and narrow-angle astrometry of faint, red objects. Following the scientific drivers, we analyze the VLTI infrastructure, and subsequently derive the requirements and concept for the optimum instrument. The analysis can be summarized with the need for highest sensitivity, phase referenced imaging and astrometry of two objects in the VLTI beam, and infrared wavefront-sensing…
We present K-band commissioning observations of the Mira star prototype o Cet obtained at the ESO Very Large Telescope Interferometer (VLTI) with the VINCI instrument and two siderostats. The observations were carried out between 2001 October and December, in 2002 January and December, and in 2003 January. Rosseland angular radii are derived from the measured visibilities by fitting theoretical visibility functions obtained from center-to-limb intensity variations (CLVs) of Mira star models (Bessel et al. 1996, Hofmann et al. 1998, Tej et al. 2003). Using the derived Rosseland angular radii an…
The VLTI is the ideal instrument for measuring the distances of nearby Cepheids with the Baade-Wesselink method, allowing an accurate recalibration of the Cepheid Period-Luminosity relation. The high accuracy required by such measurement, however, can only be reached taking into account the effects of limb darkening, and its dependence on the Cepheid pulsations. We present here our new method to compute phase- and wavelength-dependent limb darkening profiles, based on hydrodynamic simulation of Classical Cepheid atmospheres.
We present the results of N-band spectro-interferometric observations of the silicate carbon star IRAS08002-3803 with the MID-infrared Interferometric instrument (MIDI) at the Very Large Telescope Interferometer (VLTI) of the European Southern Observatory (ESO). The observations were carried out using two unit telescopes (UT2 and UT3) with projected baseline lengths ranging from 39 to 47 m. Our observations of IRAS08002-3803 have spatially resolved the dusty environment of a silicate carbon star for the first time and revealed an unexpected wavelength dependence of the angular size in the N ba…
The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolution from R= 100 to 12000; and d) internal fringe tracking on-axis, or off-axis when associated to the PRIMA dual-beam facility. The concept of VSI consists on 6 sub-systems: a common path distributing the…
We present the optical and cryo-mechanical solutions for the Spectrograph of VSI (VLTI Spectro-Imager), the second generation near-infrared (J, H and K bands) interferometric instrument for the VLTI. The peculiarity of this spectrograph is represented by the Integrated Optics (IO) beam-combiner, a small and delicate component which is located inside the cryostat and makes VSI capable to coherently combine 4, 6 or even 8 telescopes. The optics have been specifically designed to match the IO combiner output with the IR detector still preserving the needed spatial and spectral sampling, as well a…
We present a novel approach to model the nearby stars Alpha Cen A & B and Procyon A using asteroseismic and interferometric constraints. Using the VINCI instrument installed at the VLT Interferometer (VLTI), the angular diameters of the Alpha Centauri system were measured with a relative precision of 0.2% and 0.6%, respectively. From these values, we derive linear radii of R[A] = 1.224 +/- 0.003 R_sun and R[B] = 0.863 +/- 0.005 R_sun. These radii are in excellent agreement with the models of Thevenin et al. (2002), that use asteroseismic frequencies as constraints (Bouchy & Carrier 2001; Bouch…
Our objective is to prove that integrated optics (IO) is not only a good concept for astronomical interferometry but also a working technique with high performance. We used the commissioning data obtained with the dedicated K-band integrated optics two-telescope beam combiner which now replaces the fiber coupler MONA in the VLTI/VINCI instrument. We characterize the behaviour of this IO device and compare its properties to other single mode beam combiner like the previously used MONA fiber coupler. The IO combiner provides a high optical throughput, a contrast of 89% with a night-to-night stab…
