Massive stars deeply influence their surroundings by their luminosity and the injection of kinetic energy. So far, they have mostly been studied with spatially unresolved observations, although evidence of geometrical complexity of their wind are numerous. Interferometry can provide spatially resolved observations of massive stars and their immediate vicinity. Specific geometries (disks, jets, latitude-dependent winds) can be probed by this technique. The first observation of a Wolf-Rayet (WR) star (γ^2 Vel) with the AMBER/VLTI instrument yielded to a re-evaluation of its distance and an improved characterization of the stellar components, from a very limited data-set. This motivated our team to increase the number of WR targets observed with AMBER. We present here new preliminary results that encompass several spectral types, ranging from early WN to evolved dusty WC. We present unpublished data on WR79a, a massive star probably at the boundary between the O and Wolf- Rayet type, evidencing some Wolf-Rayet broad emission lines from an optically thin wind. We also present new data obtained on γ^2 Vel that can be compared to the up-to-date interferometry-based orbital parameters from North et al. (2007). We discuss the presence of a wind-wind collision zone in the system and provide preliminary analysis suggesting the presence of such a structure in the data. Then, we present data obtained on 2 dusty Wolf-Rayet stars: WR48a-b and WR118, the latter exhibiting some clues of a pinwheel-like structure from the visibility variations.
We present the current performances of the AMBER / VLTI instrument in terms of differential observables (differential phase and differential visibility) and show that we are already able to reach a sufficient precision for very low mass companions spectroscopy and mass characterization. We perform some extrapolations with the knowledge of the current limitations of the instrument facility. We show that with the current setup of the AMBER instrument, we can already reach $3σ= 10^{-3}$ radians and have the potential to some low mass companions characterization (Brown dwarves or hypothetical very…
The AMBER instrument installed at the Very Large Telescope (VLT) combines three beams from as many telescopes to produce spectrally dispersed fringes from milli-arcsecond angular scale in the near infrared. Two years after installation, first scientific observations have been carried out during the Science Demonstration Time and the Guaranteed Time mostly on bright sources due to some VLTI limitations. In this paper, we review these first astrophysical results and we show which types of completely new information is brought by AMBER. The first astrophysical results have been mainly focusing on…
Our goal is to demonstrate the potential of the interferometric AMBER instrument linked with the Very Large Telescope Interferometer (VLTI) fringe-tracking facility FINITO to derive high-precision stellar diameters. We use commissioning data obtained on the bright single star V3879 Sgr. Locking the interferometric fringes with FINITO allows us to record very low contrast fringes on the AMBER camera. By fitting the amplitude of these fringes, we measure the diameter of the target in three directions simultaneously with an accuracy of 25 micro-arcseconds. We showed that V3879 Sgr has a round pho…
AIMS: We have found that the interferometric visibilities of VLTI-AMBER observations, extracted via the standard reduction package, are significantly biased when faint targets are concerned. The visibility biases derive from a time variable fringing effect (correlated noise) appearing on the detector. METHODS: We have developed a method to correct this bias that consists in a subtraction of the extra power due to such correlated noise, so that the real power spectrum at the spatial frequencies of the fringing artifact can be restored. RESULTS: This pre-processing procedure is implemented in a …
AMBER is the General User near-infrared focal instrument of the Very Large Telescope interferometer. Its specifications are based on three key programs on Young Stellar Objects, Active Galactic Nuclei central regions, masses and spectra of hot Extra Solar Planets. It has an imaging capacity because it combines up to three beams and very high accuracy measurement are expected from the spatial filtering of beams by single mode fibers and the comparison of measurements made simultaneously in different spectral channels.
AMBER is the first near infrared focal instrument of the VLTI. It combines three telescopes and produces spectrally resolved interferometric measures. This paper discusses some preliminary results of the first scientific observations of AMBER with three Unit Telescopes at medium (1500) and high (12000) spectral resolution. We derive a first set of constraints on the structure of the circumstellar material around the Wolf Rayet Gamma2 Velorum and the LBV Eta Carinae.
This paper describes the design goals and engineering efforts that led to the realization of AMBER (Astronomical Multi BEam combineR) and to the achievement of its present performance. On the basis of the general instrumental concept, AMBER was decomposed into modules whose functions and detailed characteristics are given. Emphasis is put on the spatial filtering system, a key element of the instrument. We established a budget for transmission and contrast degradation through the different modules, and made the detailed optical design. The latter confirmed the overall performance of the instru…
We present the first high spatial and spectral observations of the circumstellar envelope (CSE) of a B[e] supergiant (CPD$-57 2874$), performed with the Very Large Telescope Interferometer (VLTI). Spectra, visibilities, and closure phase, were obtained using the beam-combiner instruments AMBER (near-IR interferometry with three 8.3 m Unit Telescopes or UTs) and MIDI (mid-IR interferometry with two UTs). The interferometric observations of the CSE are well fitted by an elliptical Gaussian model with FWHM diameters varying linearly with wavelength. Typical diameters measured are $\simeq1.8\times…
We present here the current performances of the AMBER / VLTI instrument for standard use and compare these with the offered modes of the instrument. We show that the instrument is able to reach its specified precision only for medium and high spectral resolution modes, differential observables and bright objects. For absolute observables, the current achievable accuracy is strongly limited by the vibrations of the Unit Telescopes, and also by the observing procedure which does not take into account the night-long transfer function monitoring. For low-resolution mode, the current limitation is …
We investigate the origin of the $\mathrm{Br}γ$ emission of the Herbig Ae star HD104237 on Astronomical Unit (AU) scales. Using AMBER/VLTI at a spectral resolution R=1500 spatially resolve the emission in both the BrGamma line and the adjacent continuum. The visibility does not vary between the continuum and the BrGamma line, even though the line is strongly detected in the spectrum, with a peak intensity 35% above the continuum. This demonstrates that the line and continuum emission have similar size scales. We assume that the K-band continuum excess originates in a ``puffed-up'' inner rim of…
We present in this paper an innovative data reduction method for single-mode interferometry. It has been specifically developed for the AMBER instrument, the three-beam combiner of the Very Large Telescope Interferometer, but can be derived for any single-mode interferometer. The algorithm is based on a direct modelling of the fringes in the detector plane. As such, it requires a preliminary calibration of the instrument in order to obtain the calibration matrix which builds the linear relationship between the interferogram and the interferometric observable, that is the complex visibility. On…
We study the Be star $δ$ Cen circumstellar disk using long-baseline interferometry which is the only observing technique capable of resolving spatially and spectroscopically objects smaller than 5 mas in the H and K b and. We used the VLTI/AMBER instrument on January 6, 8, and 9, 2008, in the H and K bands to complete low (35) and medium (150 0) spectral resolution observations. We detected an oscillation in the visibility curve plotted as a function of the spatial frequency which is a clear signat ure of a companion around $δ$ Cen. Our best-fit soltution infers a binary separation of 68.7 mas…
We have used near- and mid-infrared interferometry to investigate the pulsating atmosphere and the circumstellar environment of the Mira variable RR Aql. Observations were taken with the VLTI/AMBER (near infrared) and the VLTI/MIDI (mid infrared) instruments. We have obtained a total of 15 MIDI epochs between Apr 9, 2004 and Jul 28, 2007 covering 4 pulsation cycles and one AMBER epoch on Sep 9, 2006 at phase 2.82. This work is also part of an ongoing project of joint VLTI and VLBA observations to study the connection between stellar pulsation and the mass loss process. Here we present a compar…
The paper investigates the milli-arcsecond scale structure of the present-day mass-loss of the post-Red Supergiant IRC+10420. We use three telescopes of the VLT Interferometer in combination with the AMBER near-infrared beam combiner to measure spectrally dispersed correlated fluxes in the K-band around the Br gamma transition. The resulting visibilities are compared to the predicted visibilities of emission structures with various simple models in order to infer the size of the observed emission region. The Br gamma line is resolved by VLTI+AMBER on all three baselines, with the maximum proje…
The young stellar object MWC297 is a B1.5Ve star exhibiting strong hydrogen emission lines. This object has been observed by the AMBER/VLTI instrument in 2-telescope mode in a sub-region of the K spectral band centered around the Br gamma line at 2.1656 microns. The object has not only been resolved in the continuum with a visibility of 0.50+/-0.10, but also in the Br gamma line, where the flux is about twice larger, with a visibility about twice smaller (0.33+/-0.06). The continuum emission is consistent with the expectation of an optically thick thermal emission from dust in a circumstellar …
We studied the geometry of the inner (AU-scale) circumstellar environment around the Herbig Be star MWC 147. Combining, for the first time, near- (NIR, K band) and mid-infrared (MIR, N band) spectro-interferometry on a Herbig star, our VLTI/MIDI and AMBER data constrain not only the geometry of the brightness distribution, but also the radial temperature distribution in the disk. For our detailed modeling of the interferometric data and the spectral energy distribution, we employ 2-D radiation transfer simulations, showing that passive irradiated Keplerian dust disks can easily fit the SED, bu…
Aims. We aim to study the geometry and kinematics of the disk around the Be star $α$ Arae as a function of wavelength, especially across the Br$γ$ emission line. The main purpose of this paper is to answer the question about the nature of the disk rotation around Be stars. Methods. We use the VLTI/AMBER instrument operating in the K band which provides a gain by a factor 5 in spatial resolution compared to previous VLTI/MIDI observations. Moreover, it is possible to combine the high angular resolution provided with the (medium) spectral resolution of AMBER to study the kinematics of the inner …
AMBER was installed in March 2004 in the VLTI focal lab of the VLT observatory in Cerro Paranal run by ESO. Since then, there have been 4 commissioning runs and additional VLTI infrastructure installed (IRIS, FINITO and ATs,...), but AMBER is not yet fulfilling all its initial specifications and some important primary science objectives cannot be achieved. At the consortium level, an action plan has been decided in Oct 2007 that created an AMBER Task Force (ATF) to understand and possibly cure the eventual technical issues. The objectives of the February 2008 run was mainly to bring AMBER into…
The first astrophysical results of the VLTI focal instrument AMBER have shown the importance of the differential and closure phase measures, which are supposed to be much less sensitive to atmospheric and instrumental biases than the absolute visibility. However there are artifacts limiting the accuracy of these measures which can be substantially overcome by a specific calibration technique called Beam Commutation. This paper reports the observed accuracies on AMBER/VLTI phases in different modes, discusses some of the instrumental biases and shows the accuracy gain provided by Beam Commutati…
Aims. We study the geometry and kinematics of the circumstellar environment of the Be star Kappa CMa in the Br gamma emission line and its nearby continuum. Methods. We use the VLTI/AMBER instrument operating in the K band which provides a spatial resolution of about 6 mas with a spectral resolution of 1500 to study the kinematics within the disk and to infer its rotation law. In order to obtain more kinematical constraints we also use an high spectral resolution Pa beta line profile obtain in December 2005 at the Observatorio do Pico do Dios, Brazil and we compile V/R line profile variations …
We present the first spectro-interferometric observations of the circumstellar envelope (CSE) of a B[e] supergiant (CPD -57 2874), performed with the Very Large Telescope Interferometer (VLTI) using the beam-combiner instruments AMBER (near-IR interferometry with three 8.3 m Unit Telescopes or UTs) and MIDI (mid-IR interferometry with two UTs). Our observations of the CSE are well fitted by an elliptical Gaussian model with FWHM diameters varying linearly with wavelength. Typical diameters measured are $\simeq1.8\times3.4$ mas or $\simeq4.5\times8.5$ AU (adopting a distance of 2.5 kpc) at $2.2…
The young stellar object MWC 297 has been observed with the VLT interferometer equipped with the AMBER instrument. MWC 297 has been spatially resolved in the continuum with a visibility of 0.50 as well as in the Br gamma emission line where the visibility decrease to a lower value of 0.33. This change in the visibility with the wavelength can be interpreted by the presence of an optically thick disk responsible for the visibility in the continuum and of a stellar wind traced by Br gamma and whose apparent size is 40% larger. We validate this interpretation by building a model of the stellar en…
Differential phase observations with a near-IR interferometer offer a way to obtain spectra of extrasolar planets. The method makes use of the wavelength dependence of the interferometer phase of the planet/star system, which depends both on the interferometer geometry and on the brightness ratio between the planet and the star. The differential phase is strongly affected by instrumental and atmospheric dispersion effects. Difficulties in calibrating these effects might prevent the application of the differential phase method to systems with a very high contrast, such as extrasolar planets. A …
We report on interferometric AMBER/VLTI observations of the recurrent nova RS Oph five days after its outburst on 2006 Feb 12. Using three baselines from 44 to 86m, and a spectral resolution of 1500, we measured the extension of the emission in the K band continuum and in the BrG and HeI2.06 micron lines. The continuum visibilities were interpreted by fitting simple geometric models consisting of uniform and Gaussian ellipses, ring and binary models. The visibilities and differential phases in the BrG line were interpreted using skewed ring models aiming to perform a limited parametric reconst…
We present the first NIR spectro-interferometry of the LBV Eta Carinae. The K band observations were performed with the AMBER instrument of the ESO Very Large Telescope Interferometer using three 8.2m Unit Telescopes with baselines from 42 to 89m. The aim of this work is to study the wavelength dependence of Eta Car's optically thick wind region with a high spatial resolution of 5 mas (11 AU) and high spectral resolution. The medium spectral resolution observations (R=1,500) were performed in the wavelength range around both the HeI 2.059 micron and the Br gamma 2.166 micron emission lines, th…
To trace the accretion and outflow processes around YSOs, diagnostic spectral lines such as the BrG 2.166 micron line are widely used, although due to a lack of spatial resolution, the origin of the line emission is still unclear. Employing the AU-scale spatial resolution which can be achieved with infrared long-baseline interferometry, we aim to distinguish between theoretical models which associate the BrG line emission with mass infall or mass outflow processes. Using the VLTI/AMBER instrument, we spatially and spectrally (R=1500) resolved the inner environment of five Herbig Ae/Be stars (H…
In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primari…
e present 4 very low mass stars radii measured with the VLTI using the 2.2 microns VINCI test instrument. The observations were carried out during the commissioning of the 104-meter-baseline with two 8-meter-telescopes. We measure angular diameters of 0.7-1.5 mas with accuracies of 0.04-0.11 mas, and for spectral type ranging from M0V to M5.5V. We determine an empirical mass-radius relation for M dwarfs based on all available radius measurements. The observed relation agrees well with theoretical models at the present accuracy level, with possible discrepancy around 0.5-0.8 Msolar that needs t…
We present feasibility studies to directly image stellar surface features, which are caused by magnetic activity, with the Very Large Telescope Interferometer (VLTI). We concentrate on late type magnetically active stars, for which the distribution of starspots on the surface has been inferred from photometric and spectroscopic imaging analysis. The study of the surface spot evolution during consecutive rotation cycles will allow first direct measurements (apart from the Sun) of differential rotation which is the central ingredient of magnetic dynamo processes. The VLTI will provide baselines …
At the Very Large Telescope Interferometer, the purpose of the fringe-tracker FINITO is to stabilize the optical path differences between the beams, allowing longer integration times on the scientific instruments AMBER and MIDI. Our goal is to demonstrate the potential of FINITO for providing H-band interferometric visibilities, simultaneously and in addition to its normal fringe-tracking role. We use data obtained during the commissioning of the Reflective Memory Network Recorder at the Paranal observatory. This device has permitted the first recording of all relevant real-time data needed fo…
Evolutionary tracks are of key importance for the understanding of star formation. Unfortunately, tracks published by various groups differ so that it is fundamental to have observational tests. In order to do this, we intend to measure the masses of the two components of the Pre-Main Sequence binary HD113449 by combining radial velocity measurements taken with HARPS, with infrared interferometric data using AMBER on the VLTI. The spectroscopic orbit that has already been determined, combined with the first AMBER measurement, allows us to obtain a very first estimation of the inclination of th…
Context: The bright star eta Carinae is the most massive and luminous star in our region of the Milky Way. Though it has been extensively studied using many different techniques, its physical nature and the mechanism that led to the creation of the Homunculus nebula are still debated. Aims: We aimed at resolving the central engine of the eta Carinae complex in the near-infrared on angular scales of a few milliarcseconds. Methods: We used the VINCI instrument of the VLTI to recombine coherently the light from two telescopes in the K band. Results: We report a total of 142 visibility measurement…
Investigating the environment of the massive black hole SgrA* at the center of the Galaxy requires the highest angular resolution available to avoid source confusion and to study the physical properties of the individual objects. GCIRS7 has been used as wavefront and astrometric reference. Our studies investigate, for the first time, its properties at 2&10um using VLTI/AMBER and MIDI. We aim at analyzing the suitability of IRS7 as an IF-phase-reference for the upcoming generation of dual-field facilities at optical interferometers. We observed with (R~30) and 50m (proj.) baseline, resulting in…
We present the first high spatial resolution monitoring of the dust forming nova V1280 Sco performed with the Very Large Telescope Interferometer (VLTI). Spectra and visibilities were obtained from the onset of the dust formation 23 days after discovery till day 145, using the instruments AMBER and MIDI. These interferometric observations are complemented by near-infrared data from the 1.2m Mt. Abu Infrared Observatory, India. The observations are first interpreted with simple models but more complex models, involving a second shell, are necessary to explain the data obtained from t=110d after…
The direct observation of extrasolar planets and their spectra is coming into reach with the new generation of ground-based near-IR interferometers, like the Very Large Telescope Interferometer (VLTI). The high contrast between star and planet requires an excellent calibration of atmospheric distortions. Proposed techniques are the observation of color-differential or closure phases. The differential phase, however, is only in a first order approximation independent of atmospheric influences because of dispersion effects. This might prevent differential phase observations of extrasolar planets…
We study the geometry and the physical conditions in the inner (AU-scale) circumstellar region around the young Herbig Be star MWC 147 using long-baseline spectro-interferometry in the near-infrared (NIR K-band, VLTI/AMBER observations and PTI archive data) as well as the mid-infrared (MIR N-band, VLTI/MIDIobservations). The emission from MWC 147 is clearly resolved and has a characteristic physical size of approx. 1.3 AU and 9 AU at 2.2 micron and 11 micron respectively (Gaussian diameter). The spectrally dispersed AMBER and MIDI interferograms both show a strong increase in the characteristi…
We present observations of the dusty emission from the young planetary nebulae Hen2-113 and CPD-56 obtained with VLT/NACO, VLTI/MIDI. The central stars of these two objects are Wolf-Rayet stars of the same spectral type [WC10]. They share an impressive number of characteristics and are located at similar distance, making the detection of any differences in their close environment of great interest. Hen2-113 exhibits a clear ring-like structure of about 0.4 arcsec in diameter, superimposed to a more diffuse environment visible in L', M' and 8.7 micron bands. No clear core could be detected for …
The first complete orbital solution for the double-lined spectroscopic binary system γ^2 Velorum, obtained from measurements with the Sydney University Stellar Interferometer (SUSI), is presented. This system contains the closest example of a Wolf-Rayet star and the promise of full characterisation of the basic properties of this exotic high-mass system has subjected it to intense study as an archetype for its class. In combination with the latest radial-velocity results, our orbital solution produces a distance of 336^{+8}_{-7} pc, significantly more distant than the Hipparcos estimation (Sch…
We investigate the emissivity properties of the main near-IR transitions of the Fe+ ion in the conditions prevailing in the inner regions of jets from young stars, based on a simplified 16-level atom model. We present new diagnostic diagrams involving prominent near-IR line ratios that allow us to constrain the electronic density, temperature, and Fe gas phase abundance ratio, independently of the heating process. Comparison with recent near-IR observations of a sample of HH objects indicates gas phase Fe abundances ranging from 15-50 % up to 100 % of the solar value in agreement with the mode…
We present high spatial resolution observations of the dusty core of the Planetary Nebula with Wolf-Rayet central star CPD-568032. These observations were taken with the mid-infrared interferometer VLTI/MIDI in imaging mode providing a typical 300 mas resolution and in interferometric mode using UT2-UT3 47m baseline providing a typical spatial resolution of 20 mas. The visible HST images exhibit a complex multilobal geometry dominated by faint lobes. The farthest structures are located at 7" from the star. The mid-IR environment of CPD-568032 is dominated by a compact source, barely resolved b…
