Cavity opto-mechanics studies the coupling between a mechanical oscillator and a cavity field, with the aim to shed light on the border between classical and quantum physics. Here we report on a cavity opto-mechanical system in which a collective density excitation of a Bose-Einstein condensate is shown to serve as the mechanical oscillator coupled to the cavity field. We observe that a few photons inside the ultrahigh-finesse cavity trigger a strongly driven back-action dynamics, in quantitative agreement with a cavity opto-mechanical model. With this experiment we approach the strong coupling regime of cavity opto-mechanics, where a single excitation of the mechanical oscillator significantly influences the cavity field. The work opens up new directions to investigate mechanical oscillators in the quantum regime and quantum gases with non-local coupling.
We study the dynamics of the many-body state of ultracold bosons trapped in a bistable optical lattice in an optomechanical resonator controlled by a time-dependent input field. We focus on the dynamics of the many-body system following discontinuous jumps of the intracavity field. We identify experimentally realizable parameters for the bistable quantum phase transition between Mott insulator and superfluid.
We propose a scheme that can generate tunable optomechanically induced transparency in a hybrid piezooptomechanical cavity system. The system is composed of a high-quality planar distributed Bragg reflector cavity modified with an embedded Gaussian-shaped defect. Moreover, interdigitated transducers are fabricated on the surface of the cavity to generate surface acoustic waves. Under the actuation of the surface acoustic wave, the upper Bragg mirrors can be vibrated as a bulk acoustic resonator, and the distributed Bragg reflector cavity becomes a standard three-level optomechanical system. In…
We show that a cavity optomechanical system formed by a mechanical resonator simultaneously coupled to two modes of an optical cavity can be used for the implementation of a deterministic quantum phase gate between optical qubits associated with the two intracavity modes. The scheme is realizable for sufficiently strong single-photon optomechanical coupling in the resolved sideband regime, and is robust against cavity losses.
We study the optomechanical behaviour of a driven Fabry-Pérot cavity containing two vibrating dielectric membranes. We characterize the cavity-mode frequency shift as a function of the two-membrane positions, and report a $\sim 2.47$ gain in the optomechanical coupling strength of the membrane relative motion with respect to the single membrane case. This is achieved when the two membranes are properly positioned to form an inner cavity which is resonant with the driving field. We also show that this two-membrane system has the capability to tune the single-photon optomechanical coupling on de…
We theoretically propose a scheme to realize an all-optically controlled quantum optomechanical transistor based on a cavity-optomechanical system, where the cavity photons interfere with the input signal photons while the pump field controls the transmission spectrum of the signal laser. Theoretical analysis shows such a quantum optomechanical transistor can be switched on or off by turning on or off the pump laser, which corresponds to amplification or attenuation of the signal laser, respectively. The results further demonstrate that the output signal gain is enhanced abruptly with increasi…
We explain dynamical localization of Bose-Einstein condensate (BEC) in optomechanics both in position and in momentum space. The experimentally realizable optomechanical system is a Fabry-Perot cavity with one moving end mirror and driven by single mode standing field. In our study we analyze variations in modulation strength and effective Plank's constant. Keeping in view present day experimental advances we provide set of parameters to observe the phenomenon in laboratory.
We propose a scheme that can generate a tunable double optomechanically induced transparency (OMIT) in a hybrid optomechanical cavity system, in which the mechanical resonator of an optomechanical cavity is coupled to an additional mechanical resonator, and the additional mechanical resonator can be driven by a weak external coherently mechanical driving field. We show that both the intensity and the phase of the the external mechanical driving field can control the propagation of the probe field, including changing the transmission spectrum curve from a double-window to a single-window. Our s…
We present an overview of experimental work to embed high-Q mesoscopic mechanical oscillators in microwave and optical cavities. Based upon recent progress, the prospect for a broad field of "cavity quantum mechanics" is very real. These systems introduce mesoscopic mechanical oscillators as a new quantum resource and also inherently couple their motion to photons throughout the electromagnetic spectrum.
We propose a scheme to realize the phase-preserving amplification without the restriction of resolved sideband condition. As a result, our gain-bandwidth product is about one magnitude larger than the existing proposals. In our model, an additional cavity is coupled to the cavity-optomechanical system. Therefore our operating frequency is continuously tunable via adjusting the coupling coefficient of the two cavities.
We study the physical properties of double-cavity optomechanical system in which the mechanical resonator interacts with one of the coupled cavities and another cavity is used as an auxiliary cavity. The model can be expected to achieve the strong optomechanical coupling strength and overcome the optomechanical cavity decay, simultaneously. Through the coherent auxiliary cavity interferences, the steady-state squeezing of mechanical resonator can be generated in highly unresolved sideband regime. The validity of the scheme is assessed by numerical simulation and theoretical analysis of the ste…
We theoretically investigate the optomechanically induced transparency (OMIT) phenomenon in a N-cavity optomechanical system doped with a pair of Rydberg atoms with the presence of a strong pump field and a weak probe field applied to the Nth cavity. 2N-1(N<10) number OMIT windows can be observed in the output field when N cavities coupled with N mechanical oscillators, respectively. But, the mechanical oscillators coupled with different even-odd label cavities lead to different effect on OMIT. On the other hand, two additional transparent windows (extra resonances) are presented, if two Rydbe…
The rigorous resource framework of quantum coherence has been set up recently and excited a wide variety of interests. Here we show that a quantum cavity optomechanical system, as an emerging platform, can behave with a certain value of quantum coherence at a macroscopic scale. We also find that the difference between the total optomechanical coherence and the sum of the optical and the mechanical coherence just equals their mutual information. Motivated by the detection of the optomechanical entanglement, an experimentally feasible scheme to probe the optomechanical coherence is proposed.
A cavity optomechanical system is initiated by a radiation pressure of a cavity field onto a mirror element acting as a quantum resonator. This radiation pressure can control the thermodynamic character of the mirror to some extent, such as cooling its effective temperature. Here we show that by properly engineering the spectral density of a thermal heat bath that interacts with a quantum system, the evolution of the quantum system can be effectively turned on and off. Inside a cavity optomechanical system, when the heat bath is realized by a multi-mode oscillator modeling of the mirror, this …
We present a new micromechanical resonator designed for cavity optomechanics. We have used a micropillar geometry to obtain a high-frequency mechanical resonance with a low effective mass and a very high quality factor. We have coated a 60-$μ$m diameter low-loss dielectric mirror on top of the pillar and are planning to use this micromirror as part of a high-finesse Fabry-Perot cavity, to laser cool the resonator down to its quantum ground state and to monitor its quantum position fluctuations by quantum-limited optical interferometry.
The dynamics of a large quantum spin coupled parametrically to an optical resonator is treated in analogy with the motion of a cantilever in cavity optomechanics. New spin optodynamic phenonmena are predicted, such as cavity-spin bistability, optodynamic spin-precession frequency shifts, coherent amplification and damping of spin, and the spin optodynamic squeezing of light.
We analyze a cavity optomechanical setup, in which position of an oscillator modulates optical loss. We show that in such setup quantum limited position measurements can be performed if the external cavity coupling rate matches the optical loss rate, a condition known as "critical coupling". Additionally, under this condition the setup exhibits a number of potential benefits for practical operation including the complete absence of dynamical backaction, and hence optomechanical instability, and rejection of classical laser noise and thermal fluctuations of cavity frequency from the measurement…
Cavity Optomechanical system is speedily approaching the regime where the radiation pressure of a single photon displaces the moving mirror. In this paper, we consider a cavity optomechanical system where the cavity field is driven by an external field. In the limit of weak mirror-cavity couplings, we calculate analytically the reflection and transmission rates for cavity field and discuss the effects of mirror-cavity coupling on the reflection and transmission.
We study entanglement of the cavity modes in a double-cavity optomechanical system in strong-coupling regime. The system consists of two optomechanical systems coupled by a single photon hopping between them. With the radiation pressure of the photon, entanglement of the cavity modes can be generated. The concurrence between the cavity modes is at least twice larger than that between the mechanical modes. Moreover, when we change the ratio between coupling strength and resonant frequency of mechanical modes, the entanglement in cavity and mechanical modes are influenced differently.
We investigate the response of a harmonically confined mirror to an optical pulse in cavity optomechanics. We show that when the pulsed coupling strength takes the form of a chirped pulse, thermal fluctuations of the mirror can be significantly transferred to the cavity field. In addition, the frequency modulation of the pulse could enable a better cooling performance by suppressing the sensitivity of the dependence of detuning and pulse areas. Using numerical investigations, we find that the pulsed-cooling is mainly limited by the cavity-field decay rate.
We demonstrate optimal state estimation for a cavity optomechanical system through Kalman filtering. By taking into account nontrivial experimental noise sources, such as colored laser noise and spurious mechanical modes, we implement a realistic state-space model. This allows us to obtain the conditional system state, i.e., conditioned on previous measurements, with minimal least-square estimation error. We apply this method for estimating the mechanical state, as well as optomechanical correlations both in the weak and strong coupling regime. The application of the Kalman filter is an import…
We show how stationary entanglement between an optical cavity field mode and a macroscopic vibrating mirror can be generated by means of radiation pressure. We also show how the generated optomechanical entanglement can be quantified and we suggest an experimental readout-scheme to fully characterize the entangled state. Surprisingly, such optomechanical entanglement is shown to persist for environment temperatures above 20K using state-of-the-art experimental parameters.
Strongly driven cavity quantum electrodynamical-optomechanical hybrid system
Laboratory of Photonics and Quantum Measurements (LPQM), Swiss Federal Institute of Technology Lausanne (EPFL)（洛桑联邦理工学院光子与量子测量实验室）；Center for Quantum Science and Engineering, EPFL（洛桑联邦理工学院量子科学与工程中心）
We investigate theoretically the extension of cavity optomechanics to multiple membrane systems. We describe such a system in terms of the coupling of the collective normal modes of the membrane array to the light fields. We show these modes can be optically addressed individually and be cooled, trapped and characterized, e.g. via quantum nondemolition measurements. Analogies between this system and a linear chain of trapped ions or dipolar molecules imply the possibility of related applications in the quantum regime.
We study the cavity mode frequencies of a Fabry-Pérot cavity containing two vibrating dielectric membranes. We derive the equations for the mode resonances and provide approximate analytical solutions for them as a function of the membrane positions, which act as an excellent approximation when the relative and center-of-mass position of the two membranes are much smaller than the cavity length. With these analytical solutions, one finds that extremely large optomechanical coupling of the membrane relative motion can be achieved in the limit of highly reflective membranes when the two membrane…
We theoretically investigate the optical and mechanical properties of a double cavity optomechanical system with one stationary and two harmonically bound mirrors. We show that it is possible for the mechanical mirrors in this system to posses negative effective mass. Working within the strong coupling and the resolved sideband regime, we show that the displacement of the middle resonator is multistable under certain constrains. We also point to the existence of optomechanically induced absorption (OMIA) and Fano resonance. Owing to the negative effective mass, our scheme can be exploited in t…
Optomechanical couplings involve both beam-splitter and two-mode-squeezing types of interactions. While the former underlies the utility of many applications, the latter creates unwanted excitations and is usually detrimental. In this work, we propose a simple but powerful method based on cavity parametric driving to suppress the unwanted excitation that does not require working with a deeply sideband-resolved cavity. Our approach is based on a simple observation: as both the optomechanical two-mode-squeezing interaction and the cavity parametric drive induce squeezing transformations of the r…
We propose that the dispersion management of coherent atomic matter waves can be exploited to overcome quantum back-action in condensate-based optomechanical sensors. The effective mass of an atomic Bose-Einstein condensate modulated by an optical lattice can become negative, resulting in a negative-frequency optomechanical oscillator, a negative environment temperature, and optomechanical properties opposite to those of a positive-mass system. This enables a quantum-mechanics-free subsystem insulated from quantum back-action.
Cavity opto-mechanical cooling via radiation pressure dynamical backaction enables ground state cooling of mechanical oscillators, provided the laser exhibits sufficiently low phase noise. Here, we investigate and measure the excess phase noise of widely tunable external cavity diode lasers, which have been used in a range of recent nano-optomechanical experiments, including ground-state cooling. We report significant excess frequency noise, with peak values on the order of 10^7 rad^2 Hz near 3.5 GHz, attributed to the diode lasers' relaxation oscillations. The measurements reveal that even at…
We consider a quantum optomechanical scheme wherein an ordered two-dimensional array of laser-trapped atoms is used as a movable membrane. The extremely light mass of the atoms yields very strong optomechanical coupling, while their spatial order largely eliminates scattering losses. We show that this combination opens the way for quantum optomechanical nonlinearities, well within the ultimate single-photon strong-coupling regime. As an example, we analyze the possibility to observe optomechanically induced quantum effects such as photon blockade and time-delayed non-classical correlations. We…
We propose a scheme for high quantum state transfer efficiency between two distant mechanical oscillators. Through coupling separately to two optical cavities connected by an optical fiber, two distant mechanical oscillators achieve a transfer efficiency closing to unity. In the process of analysis, we employed time-varying optomechanical coupling strength as a Gaussian pulse.
We propose a scheme that is able to generate the microwave controlled optical double optome-chanical induced transparency (OMIT) in a hybrid piezo-optomechanical cavity system, which a piezoelectric optomechanical crystal AlN-nanobeam resonator is placed in a superconducting microwave cavity, and the AlN-nanobeam resonator can be simultaneously driven by both the optical field via the radiation pressure and the microwave field via the piezoelectric interaction. We show that in the presence of a strong pumped optical field applied to the optomechanical crystal cavity through the optical wavegui…
We propose to cool a mechanical resonator close to its ground state via an electromagnetically-induced-transparency- (EIT-) like cooling mechanism in a double-cavity optomechanical system, where an additional cavity couples to the original one in the standard optomechanical system. By choosing optimal parameters such that the cooling process of the mechanical resonator corresponds to the maximum value of the optical fluctuation spectrum and the heating process to the minimum one, the mechanical resonator can be cooled with the final mean phonon number less than that at the absence of the addit…
Nonreciprocal devices are indispensable for building quantum networks and ubiquitous in modern communication technology. Here, we use optomechanical interaction and linearly-coupled interaction to realize optical nonreciprocal transmission in a double-cavity optomechanical system. The scheme relies on the interference between the two interactions. We derive the essential conditions to realize perfect optical nonreciprocity in the system, and analyse the properties of optical nonreciprocal transmission and the output fields from mechanical mode. These results can be used to control optical tran…
Quantum squeezing of mechanical resonator is important for studying the macroscopic quantum effects and the precision metrology of weak forces. Here we give a theoretical study of a hybrid atom-optomechanical system in which the steady-state squeezing of the mechanical resonator can be generated via the mechanical nonlinearity and cavity cooling process. The validity of the scheme is assessed by simulating the steady-state variance of the mechanical displacement quadrature numerically. The scheme is robust against dissipation of the optical cavity, and the steady-state squeezing can be effecti…
A cavity opto-electromechanical system is reported which combines the ultrasensitive transduction of cavity optomechanical systems with the electrical actuation of nanoelectromechanical systems. Ultrasensitive mechanical transduction is achieved via opto-mechanical coupling. Electrical gradient forces as large as 0.40 $μ$N are realized, facilitating strong actuation with ultralow dissipation. A scanning probe microscope is implemented, capable of characterizing the mechanical modes. The integration of electrical actuation into optomechanical devices is an enabling step towards the regime of qu…
We propose a novel scheme for realizing single-photon blockade in a weakly driven hybrid cavity optomechanical system consisting of a nonlinear photonic crystal. Sub-Poissonian statistics is realized even when the single-photon optomechanical coupling strength is smaller than the decay rate of the optical mode. The scheme relaxes the requirement of strong coupling for photon blockade in optomechanical systems. It is shown that photon blockade could be generated at the telecommunication wavelength.
We present an atom-chip-based realization of quantum cavity optomechanics with cold atoms localized within a Fabry-Perot cavity. Effective sub-wavelength positioning of the atomic ensemble allows for tuning the linear and quadratic optomechanical coupling parameters, varying the sensitivity to the displacement and strain of a compressible gaseous cantilever. We observe effects of such tuning on cavity optical nonlinearity and optomechanical frequency shifts, providing their first characterization in the quadratic-coupling regime.
We study an optomechanical system in which the mechanical motion of a single trapped ion is coupled to a cavity field for the realization of a strongly quantum correlated two-mode system. We show that for large pump intensities the steady state photon number exhibits bistable behaviour. We further analyze the occurrence of normal mode splitting (NMS) due to mixing of the fluctuations of the cavity field and the fluctuations of the ion motion which indicates a coherent energy exchange. We also find that in the parameter regime where NMS exists, the steady state of the system shows continuous va…
Dual cavity opto-electromechanical systems (OEMS) are those where two electromagnetic cavities are connected by a common mechanical spring. These systems have been shown to facilitate high fidelity quantum state transfer from one cavity to another. In this paper, we explicitly calculate the effect on the fidelity of state transfer, when an additional spring is attached to only one of the cavities. Our quantitative estimates of loss of fidelity, highlight the sensitivity of dual cavity OEMS when it couples to additional mechanical modes. We show that this sensitivity can be used to design an ef…
Quantum state transfer between cavities is crucial for quantum information processing and quantum computation in optomechanical systems. Here, we present the first scheme for the transitionless intra-cavity quantum state transfer based on transitionless quantum driving (TQD) algorithm in optomechanical systems. We also present a physically feasible system for the TQD process based on largely detuned optomechanical cavity. With the Gaussian time-dependence coupling strengths, our scheme can achieve the perfect quantum state transfer with no undesired transition and reduce the dependence of accu…
Optomechanical cooling is a prerequisite for many exotic applications promised by modern quantum technology and it is crucial to achieve it in short times, in order to minimize the undesirable effects of the environment. We formulate cavity optomechanical cooling as a minimum-time optimal control problem on anti-de Sitter space of appropriate dimension and use the Legendre pseudospectral optimization method to find the minimum time and the corresponding optimal control, for various values of the maximum coupling rate between the cavity field and the mechanical resonator. The present framework …
We propose how to achieve significantly enhanced quantum refrigeration and entanglement by coupling a pumped auxiliary cavity to an optomechanical cavity. We obtain both analytical and numerical results, and find optimal-refrigeration and -entanglement conditions under the auxiliary-cavity-assisted (ACA) mechanism. Our method leads to a giant amplification in the net refrigeration rate, and reveals that the ACA entanglement has a much stronger noise-tolerant ability in comparison with the unassisted case. By appropriately designing the ACA mechanism, an effective mechanical susceptibility can …
We identify signatures of the intrinsic nonlinear interaction between light and mechanical motion in cavity optomechanical systems. These signatures are observable even when the cavity linewidth exceeds the optomechanical coupling rate. A strong laser drive red-detuned by twice the mechanical frequency from the cavity resonance frequency makes two-phonon processes resonant, which leads to a nonlinear version of optomechanically induced transparency. This effect provides a new method of measuring the average phonon number of the mechanical oscillator. Furthermore, we show that if the strong las…
A theoretical scheme for the realization of the sphere-coherent motional states in an optomechanical cavity in the presence of a two-level atom is proposed. To this end, the analogy between an atom-assisted optomechanical cavity and a laser-driven trapped-ion system is used. This analogy provides us with a theoretical tool to show how sphere-coherent states can be generated for the motional degree of freedom of the macroscopic mechanical oscillator from atom-field-mirror interactions in a multi-mode optomechanical cavity. Some nonclassical properties of the generated state of the mechanical os…
Amplifier is at the heart of almost all experiment carrying out the precise measurement of a weak signal. An idea amplifier should have large gain and minimum added noise simultaneously. Here, we consider the quantum measurement properties of a hybrid nonlinear cavity with the Kerr and OPA nonlinear media to amplify an input signal. We show that our hybrid-nonlinear-cavity amplifier has large gain in the single-value stable regime and achieves quantum limit unconditionally.
Radiation pressure forces in cavity optomechanics allow for efficient cooling of vibrational modes of macroscopic mechanical resonators, the manipulation of their quantum states, as well as generation of optomechanical entanglement. The standard mechanism relies on the cavity photons directly modifying the state of the mechanical resonator. Hybrid cavity optomechanics provides an alternative approach by coupling mechanical objects to quantum emitters, either directly or indirectly via the common interaction with a cavity field mode. While many approaches exist, they typically share a simple ef…
We report the experimental observation of two-mode squeezing in the oscillation quadratures of a thermal micro-oscillator. This effect is obtained by parametric modulation of the optical spring in a cavity opto-mechanical system. In addition to stationary variance measurements, we describe the dynamic behavior in the regime of pulsed parametric excitation, showing enhanced squeezing effect surpassing the stationary 3dB limit. While the present experiment is in the classical regime, our technique can be exploited to produce entangled, macroscopic quantum opto-mechanical modes.
Using electromagnetically induced transparency we show how the opto-mechanical systems can be used both as memory elements as well as for the transduction of optical fields. We use a double cavity optomechanical system which facilitates such applications. By tuning the frequency of the second cavity one can produce output fields at a variety of frequencies. We present analytical results for the steady state behavior which is controlled by the power and the detuning of the field driving the second cavity.
Cavity-optomechanics is an ideal platform for the generation non-Gaussian quantum states due to the anharmonic interaction between the light field and the mechanical oscillator; but exactly this interaction also impedes the preparation in pure states of the light field. In this paper we derive a driving protocol that helps to exploit the anharmonic interaction for state preparation, and that ensures that the state of the light field remains close-to-pure. This shall enable the deterministic preparation of photon Fock states or coherent superpositions thereof.
We propose a quantum interference cooling scheme for a nano-mechanical resonator (NAMR) in a hybrid optomechanical system, where the atoms are trapped in an optomechanical cavity, coupling to an additional optical cavity. The absorption of the optomechanical resonator can be modified by quantum interference effects induced by the atom-cavity and cavity-cavity couplings independently. With the employment of the quantum interference, the desired transition for cooling is enhanced, along with the heating suppression due to the undesired transition. As a result, the NAMR vibration can be cooled do…
We theoretically analyze the light scattering of an optomechanical cavity which strongly interacts with a single two-level system and couples simultaneously to a mechanical oscillator by radiation forces. The analysis is based on the assumptions that the system is driven at low intensity, and that the mechanical interaction is sufficiently weak, permitting a perturbative treatment. We find quantum interference in the scattering paths, which allows to suppress the Stokes-component of the scattered light. This effect can be exploited to reduce the motional energy of the mechanical oscillator.
We analyze an atomic Bose-Einstein condensate trapped in a high-Q optical cavity driven by a feeble optical field, a situation formally analogous to the central paradigm of cavity optomechanics [Brennecke et al., Science, 322, 235 (2008)]. We account for two-body interactions via a two-fluid model that retains the intuitive appeal of the optomechanical two-mode description. The Bogoliubov excitation spectrum of this system comprises a gapped upper branch and a lower branch that can include an unstable excitation mode.
In a canonical optomechanical system, mechanical vibrations are dynamically encoded on an optical probe field which reciprocally exerts a backaction force. Due to the weak single photon coupling strength achieved with macroscopic oscillators, most of existing experiments were conducted with large photon numbers to achieve sizeable effects, thereby causing a dilution of the original optomechanical non-linearity. Here, we investigate the optomechanical interaction of an ultrasensitive suspended nanowire inserted in a fiber-based microcavity mode. This implementation allows to enter far into the …
We study the nonreciprocal transmission and the fast-slow light effects in a cavity optomechanical system, in which the cavity supports a clockwise and a counter-clockwise circulating optical modes, both the two modes are driven simultaneously by a strong pump field and a weak signal field. We find that when the intrinsic photon loss of the cavity is equal to the external coupling loss of the cavity, the system reveals a nonreciprocal transmission of the signal fields. However, when the intrinsic photon loss is much less than the external coupling loss, the nonreciprocity about the transmissio…
Using carefully designed hybrid metal-dielectric resonators, we study molecular optomechanics in the strong coupling regime ($g_{\rm }^2/ω_m {>} κ$), which manifests in anharmonic emission lines in the sideband-resolved region of the cavity-emitted spectrum ($κ{<}ω_m$). This nonlinear optomechanical strong coupling regime is enabled through a metal-dielectric cavity system that yields not only deep sub-wavelength plasmonic confinement, but also dielectric-like confinement times that are more than two orders of magnitude larger than those from typical localized plasmon modes. These hybrid metal…
The mechanical properties of light have found widespread use in the manipulation of gas-phase atoms and ions, helping create new states of matter and realize complex quantum interactions. The field of cavity-optomechanics strives to scale this interaction to much larger, even human-sized mechanical objects. Going beyond the canonical Fabry-Perot cavity with a movable mirror, here we explore a new paradigm in which multiple cavity-optomechanical elements are wired together to form optomechanical circuits. Using a pair of optomechanical cavities coupled together via a phonon waveguide we demonst…
Experiments in the field of optomechanics do not yet fully exploit the photon polarization degree of freedom. Here experimental results for an optomechanical interaction in a polarization nondegenerate system are presented and schemes are proposed for how to use this interaction to perform accurate side-band thermometry and to create novel forms of photon-phonon entanglement. The experimental system utilizes the compressive force in the mirror attached to a mechanical resonator to create a micro-mirror with two radii of curvature which leads, when combined with a second mirror, to a significan…
In this paper we describe a scheme for state transfer between a trapped atomic Bose condensate and an optomechanical end-mirror mediated by a cavity field. Coupling between the mirror and the cold gas arises from the fact that the cavity field can produce density oscillations in the gas which in turn acts as an internal Bragg mirror for the field. After adiabatic elimination of the cavity field we find that the hybrid system of the gas and mirror is described by a beam splitter Hamiltonian that allows for state transfer, but only if the quantum nature of the cavity field is retained.
Accessing distinctly quantum aspects of the interaction between light and the position of a mechanical object has been an outstanding challenge to cavity-optomechanical systems. Only cold-atom implementations of cavity optomechanics have indicated effects of the quantum fluctuations in the optical radiation pressure force. Here we use such a system, in which quantum photon-number fluctuations significantly drive the center of mass of an atomic ensemble inside a Fabry-Perot cavity. We show that the optomechanical response both amplifies and ponderomotively squeezes the quantum light field. We a…
