The implementation of the simultaneous combination of several telescopes (from four to eight) available at Very Large Telescope Interferometer (VLTI) will allow the new generation interferometric instrumentation to achieve interferometric image synthesis with unprecedented resolution and efficiency. The VLTI Spectro Imager (VSI) is the proposed second-generation near-infrared multi-beam instrument for the Very Large Telescope Interferometer, featuring three band operations (J, H and K), high angular resolutions (down to 1.1 milliarcsecond) and high spectral resolutions. VSI will be equipped with its own internal Fringe Tracker (FT), which will measure and compensate the atmospheric perturbations to the relative beam phase, and in turn will provide stable and prolonged observing conditions down to the magnitude K=13 for the scientific combiner. In its baseline configuration, VSI FT is designed to implement, from the very start, the minimum redundancy combination in a nearest neighbor scheme of six telescopes over six baselines, thus offering better options for rejection of large intensity or phase fluctuations over each beam, due to the symmetric set-up. The planar geometry solution of the FT beam combiner is devised to be easily scalable either to four or eight telescopes, in accordance to the three phase development considered for VSI. The proposed design, based on minimum redundancy combination and bulk optics solution, is described in terms of opto-mechanical concept, performance and key operational aspects.
At the Very Large Telescope Interferometer, the purpose of the fringe-tracker FINITO is to stabilize the optical path differences between the beams, allowing longer integration times on the scientific instruments AMBER and MIDI. Our goal is to demonstrate the potential of FINITO for providing H-band interferometric visibilities, simultaneously and in addition to its normal fringe-tracking role. We use data obtained during the commissioning of the Reflective Memory Network Recorder at the Paranal observatory. This device has permitted the first recording of all relevant real-time data needed fo…
Our goal is to demonstrate the potential of the interferometric AMBER instrument linked with the Very Large Telescope Interferometer (VLTI) fringe-tracking facility FINITO to derive high-precision stellar diameters. We use commissioning data obtained on the bright single star V3879 Sgr. Locking the interferometric fringes with FINITO allows us to record very low contrast fringes on the AMBER camera. By fitting the amplitude of these fringes, we measure the diameter of the target in three directions simultaneously with an accuracy of 25 micro-arcseconds. We showed that V3879 Sgr has a round pho…
The interferometric data processing methods that we describe in this paper use a number of innovative techniques. In particular, the implementation of the wavelet transform allows us to obtain a good immunity of the fringe processing to false detections and large amplitude perturbations by the atmospheric piston effect, through a careful, automated selection of the interferograms. To demonstrate the data reduction procedure, we describe the processing and calibration of a sample of stellar data from the VINCI beam combiner. Starting from the raw data, we derive the angular diameter of the dwar…
The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolution from R= 100 to 12000; and d) internal fringe tracking on-axis, or off-axis when associated to the PRIMA dual-beam facility. The concept of VSI consists on 6 sub-systems: a common path distributing the…
We present the optical and cryo-mechanical solutions for the Spectrograph of VSI (VLTI Spectro-Imager), the second generation near-infrared (J, H and K bands) interferometric instrument for the VLTI. The peculiarity of this spectrograph is represented by the Integrated Optics (IO) beam-combiner, a small and delicate component which is located inside the cryostat and makes VSI capable to coherently combine 4, 6 or even 8 telescopes. The optics have been specifically designed to match the IO combiner output with the IR detector still preserving the needed spatial and spectral sampling, as well a…
The AMBER instrument installed at the Very Large Telescope (VLT) combines three beams from as many telescopes to produce spectrally dispersed fringes from milli-arcsecond angular scale in the near infrared. Two years after installation, first scientific observations have been carried out during the Science Demonstration Time and the Guaranteed Time mostly on bright sources due to some VLTI limitations. In this paper, we review these first astrophysical results and we show which types of completely new information is brought by AMBER. The first astrophysical results have been mainly focusing on…
VLTi Spectro-Imager (VSI) is a proposition for a second generation VLTI instrument which is aimed at providing the ESO community with the capability of performing image synthesis at milli-arcsecond angular resolution. VSI provides the VLTI with an instrument able to combine 4 telescopes in a baseline version and optionally up to 6 telescopes in the near-infrared spectral domain with moderate to high spectral resolution. The instrument contains its own fringe tracker in order to relax the constraints onto the VLTI infrastructure. VSI will do imaging at the milli-arcsecond scale with spectral re…
We present the first high spatial and spectral observations of the circumstellar envelope (CSE) of a B[e] supergiant (CPD$-57 2874$), performed with the Very Large Telescope Interferometer (VLTI). Spectra, visibilities, and closure phase, were obtained using the beam-combiner instruments AMBER (near-IR interferometry with three 8.3 m Unit Telescopes or UTs) and MIDI (mid-IR interferometry with two UTs). The interferometric observations of the CSE are well fitted by an elliptical Gaussian model with FWHM diameters varying linearly with wavelength. Typical diameters measured are $\simeq1.8\times…
VLT-Interferometry will allow imaging of the Galactic Center (GC) and the nuclei of extragalactic sources at an angular resolution of a few milliarcseconds. VLTI will be a prime instrument to study the immediate environment of the massive black hole at the center of the Milky Way. With the MID infrared Interferometric instrument (MIDI) for example the enigmatic compact dust embedded MIR-excess sources within the central parsec should be resolvable. Further the observations of external galactic nuclei will allow unprecedented measurements of physical parameters (i.e. structure and luminosity) i…
We study the Be star $δ$ Cen circumstellar disk using long-baseline interferometry which is the only observing technique capable of resolving spatially and spectroscopically objects smaller than 5 mas in the H and K b and. We used the VLTI/AMBER instrument on January 6, 8, and 9, 2008, in the H and K bands to complete low (35) and medium (150 0) spectral resolution observations. We detected an oscillation in the visibility curve plotted as a function of the spatial frequency which is a clear signat ure of a companion around $δ$ Cen. Our best-fit soltution infers a binary separation of 68.7 mas…
We studied the geometry of the inner (AU-scale) circumstellar environment around the Herbig Be star MWC 147. Combining, for the first time, near- (NIR, K band) and mid-infrared (MIR, N band) spectro-interferometry on a Herbig star, our VLTI/MIDI and AMBER data constrain not only the geometry of the brightness distribution, but also the radial temperature distribution in the disk. For our detailed modeling of the interferometric data and the spectral energy distribution, we employ 2-D radiation transfer simulations, showing that passive irradiated Keplerian dust disks can easily fit the SED, bu…
Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and spectral scales in the near-infrared domain. This instrument will provide information complementary to what is obtained at the same time with ALMA at different wavelengths and the extreme large telescopes…
We present the first spectro-interferometric observations of the circumstellar envelope (CSE) of a B[e] supergiant (CPD -57 2874), performed with the Very Large Telescope Interferometer (VLTI) using the beam-combiner instruments AMBER (near-IR interferometry with three 8.3 m Unit Telescopes or UTs) and MIDI (mid-IR interferometry with two UTs). Our observations of the CSE are well fitted by an elliptical Gaussian model with FWHM diameters varying linearly with wavelength. Typical diameters measured are $\simeq1.8\times3.4$ mas or $\simeq4.5\times8.5$ AU (adopting a distance of 2.5 kpc) at $2.2…
Investigating the environment of the massive black hole SgrA* at the center of the Galaxy requires the highest angular resolution available to avoid source confusion and to study the physical properties of the individual objects. GCIRS7 has been used as wavefront and astrometric reference. Our studies investigate, for the first time, its properties at 2&10um using VLTI/AMBER and MIDI. We aim at analyzing the suitability of IRS7 as an IF-phase-reference for the upcoming generation of dual-field facilities at optical interferometers. We observed with (R~30) and 50m (proj.) baseline, resulting in…
The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combination of high-dynamic-range imaging at high angular resolution and high spectral resolution enables a scientific program which serves a broad user community and at the same time provides the opportunity f…
The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide intermediate to high spectral resolutions and eventually polarization analysis. This paper summarizes the result from the concept study led within the Joint Research Activity advanced instruments of the OPTI…
We present feasibility studies to directly image stellar surface features, which are caused by magnetic activity, with the Very Large Telescope Interferometer (VLTI). We concentrate on late type magnetically active stars, for which the distribution of starspots on the surface has been inferred from photometric and spectroscopic imaging analysis. The study of the surface spot evolution during consecutive rotation cycles will allow first direct measurements (apart from the Sun) of differential rotation which is the central ingredient of magnetic dynamo processes. The VLTI will provide baselines …
To trace the accretion and outflow processes around YSOs, diagnostic spectral lines such as the BrG 2.166 micron line are widely used, although due to a lack of spatial resolution, the origin of the line emission is still unclear. Employing the AU-scale spatial resolution which can be achieved with infrared long-baseline interferometry, we aim to distinguish between theoretical models which associate the BrG line emission with mass infall or mass outflow processes. Using the VLTI/AMBER instrument, we spatially and spectrally (R=1500) resolved the inner environment of five Herbig Ae/Be stars (H…
Classically, optical and near-infrared interferometry have relied on closure phase techniques to produce images. Such techniques allow us to achieve modest dynamic ranges. In order to test the feasibility of next generation optical interferometers in the context of the VLTI-spectro-imager (VSI), we have embarked on a study of image reconstruction and analysis. Our main aim was to test the influence of the number of telescopes, observing nights and distribution of the visibility points on the quality of the reconstructed images. Our results show that observations using six Auxiliary Telescopes …
We present the first VLTI/MIDI observations of the Be star Alpha Ara, showing a nearly unresolved circumstellar disk in the N band. The interferometric measurements made use of the UT1 and UT3 telescopes. The projected baselines were 102 and 74 meters with position angles of 7 degres and 55 degres, respectively. These measurements put an upper limit to the envelope size in the N band under the Uniform disk approximation of $ϕ_{\rm max}= 4\pm1.5$ mas, corresponding to 14 $R_{\star}$, assuming $R_{\star}$=4.8${\rm R}_\odot$ and the Hipparcos distance of 74pc. On the other hand the disk density m…
We present the second-generation VLTI instrument GRAVITY, which currently is in the preliminary design phase. GRAVITY is specifically designed to observe highly relativistic motions of matter close to the event horizon of Sgr A*, the massive black hole at center of the Milky Way. We have identified the key design features needed to achieve this goal and present the resulting instrument concept. It includes an integrated optics, 4-telescope, dual feed beam combiner operated in a cryogenic vessel; near infrared wavefront sensing adaptive optics; fringe tracking on secondary sources within the fi…
We present the results of N-band spectro-interferometric observations of the silicate carbon star IRAS08002-3803 with the MID-infrared Interferometric instrument (MIDI) at the Very Large Telescope Interferometer (VLTI) of the European Southern Observatory (ESO). The observations were carried out using two unit telescopes (UT2 and UT3) with projected baseline lengths ranging from 39 to 47 m. Our observations of IRAS08002-3803 have spatially resolved the dusty environment of a silicate carbon star for the first time and revealed an unexpected wavelength dependence of the angular size in the N ba…
We present the first NIR spectro-interferometry of the LBV Eta Carinae. The K band observations were performed with the AMBER instrument of the ESO Very Large Telescope Interferometer using three 8.2m Unit Telescopes with baselines from 42 to 89m. The aim of this work is to study the wavelength dependence of Eta Car's optically thick wind region with a high spatial resolution of 5 mas (11 AU) and high spectral resolution. The medium spectral resolution observations (R=1,500) were performed in the wavelength range around both the HeI 2.059 micron and the Br gamma 2.166 micron emission lines, th…
We present the first multi-epoch N-band spectro-interferometric observations of the carbon-rich Mira variable V Oph using MIDI at the ESO's Very Large Telescope Interferometer. Our MIDI observations were carried out at three different phases 0.18, 0.49, and 0.65, using three different baselines configurations (UT2-UT4, UT1-UT4, and UT2-UT3) with projected baseline lengths of 42-124 m. The wavelength dependence of the uniform-disk diameters obtained at all epochs is characterized by a roughly constant region between 8 and 10 micron with a slight dip centered at ~9.5 micron and a gradual increas…