G. Xia, K. Ohmi, E. Elsen
The fast ion instability is simulated in different gas pressures and fill patterns for the damping ring of the International Linear Collider (ILC) and PETRA III respectively. Beam size variation due to beta function and dispersion function change is taken into account. Feedback is also applied in the simulation.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
The ions produced via collisional ionization of the residual gas molecules in vacuum pipe with the circulating electron beam have deleterious effect on the beam properties and may become a limiting factor for the machine's performance. For the electron damping ring of the International Linear Collider (ILC), the ion instability is noticeable due to the ultra-low beam emittance with many bunches operation. In this paper, the different beam fill patterns are investigated and their effects on the fast ion instability are discussed. The simulations show that the mini train fill patterns can reduce…
In this paper, we will describe some of the recent experimental measurements [1, 2, 3] performed at CESRTA [4], and the supporting simulations, which probe the interaction of the electron cloud with the stored beam. These experiments have been done over a wide range of beam energies, emittances, bunch currents, and fill patterns, to gather sufficient information to be able to fully characterize the beam-electron-cloud interaction and validate the simulation programs. The range of beam conditions is chosen to be as close as possible to those of the ILC damping ring, so that the validated simula…
At linear colliders, the e+e- luminosity is limited by beam-collision effects, which determine the required emittances of beams in damping rings (DRs). While in gamma-gamma collisions at the photon collider, these effects are absent, and so smaller emittances are desirable. In present damping rings designs, nominal DR parameters correspond to those required for e+e- collisions. In this note, I would like to stress once again that as soon as we plan the photon-collider mode of ILC operation, the damping-ring emittances are dictated by the photon-collider requirements--namely, they should be as …
The effect of ions has received one of the highest priorities in R&D for the damping rings of the International Linear Collider(ILC). It is detrimental to the performance of the electron damping ring. In this note, an update concerning the ion studies for the ILC damping ring is given. We investigate the gap role and irregular fill pattern in the ring.The ion density reduction in different fills is calculated analytically. Simulation results are also presented.
Magnetic design proposed for a damping ring (DR) is based on second generation HTS cabling technology applied to the DC windings with a yoke and mu-metal-shimmed pole to achieve ~2T high-quality field within a 86 mm gap and 32-40 cm period. Low levels of current densities (~90-100A/mm2) provide a robust, reliable operation of the wiggler at higher heat loads, up to LN2 temperatures with long leads, enhanced flexibility for the cryostats and infrastructure in harsh radiation environment, and reduced failure rate compared to the baseline SC ILC DR wiggler design at very competitive cost.
To achieve the physics goals of future Linear Colliders, it is important that electron and positron beams are polarized. The positron source planned for the International Linear Collider (ILC) is based on a helical undulator system and can deliver a polarised beam with positron polarization of 60%. To ensure that no significant polarization is lost during the transport of the electron and positron beams from the source to the interaction region, spin tracking has to be included in all transport elements which can contribute to a loss of polarization. These are the positron source, the damping …
The Cornell Electron Storage Ring (CESR) was reconfigured in 2008 as a test accelerator to investigate the physics of ultra-low emittance damping rings. During the approximately 40 days/year available for dedicated operation as a test accelerator, specialized instrumentation is used to measure growth and mitigation of the electron cloud, emittance growth due to electron cloud, intra-beam scattering, and ions, and single and multi-bunch instabilities generated by collective effects. The flexibility of the CESR guide field optics and the integration of accelerator modeling codes with the control…
The current designs of future electron-positron linear colliders incorporate large and complex damping rings to produce asymmetric beams for beamstrahlung suppression. Here we present the design of an electron injector capable of delivering flat electron beams with phase-space partition comparable to the electron-beam parameters produced downstream of the damping ring in the proposed international linear collider (ILC) design. Our design does not employ a damping ring but is instead based on cross-plane phase-space-manipulation techniques. The performance of the proposed configuration, its sen…
A beam position monitor (BPM) upgrade at the KEK Accelerator Test Facility (ATF) damping ring has been accomplished, carried out by a KEK/FNAL/SLAC collaboration under the umbrella of the global ILC R&D effort. The upgrade consists of a high resolution, high reproducibility read-out system, based on analog and processing, and also implements a new automatic gain error correction schema. The technical concept and realization as well as results of beam studies are presented.
A method is presented for characterizing the emittance dilution and dynamic aperture for an arbitrary closed lattice that includes guide field magnet errors, multipole errors and misalignments. This method, developed and tested at the Cornell Electron Storage Ring Test Accelerator (CesrTA), has been applied to the damping ring lattice for the International Linear Collider (ILC). The effectiveness of beam based emittance tuning is limited by beam position monitor (BPM) measurement errors, number of corrector magnets and their placement, and correction algorithm. The specifications for damping r…
In 2008, the Cornell Electron Storage Ring (CESR) was reconfigured to serve as a test accelerator (CESR-TA) for next generation lepton colliders, in particular for the ILC damping ring. A significant part of this program has been the installation of diagnostic devices to measure and quantify the electron cloud effect, a potential limiting factor in these machines. One such device is the Retarding Field Analyzer (RFA), which provides information on the local electron cloud density and energy distribution. Several different styles of RFAs have been designed, tested, and deployed throughout the C…
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。