Oxygen vacancies at the SnO2(110) and (101) surface and subsurface sites have been studied in the framework of density functional theory by using both all-electron Gaussian and pseudopotential plane-wave methods. The all-electron calculations have been performed using the B3LYP exchange-correlation functional with accurate estimations of energy gaps and density of states. We show that bulk oxygen vacancies are responsible for the appearance of a fully occupied flat energy level lying at about 1 eV above the top valence band, and an empty level resonant with the conduction band. Surface oxygen vacancies strongly modify the surface band structures with the appearance of intragap states covering most of the forbidden energy window, or only a small part of it, depending on the vacancy depth from the surface. Oxygen vacancies can account for electron affinity variations with respect to the stoichiometric surfaces as well. A significant support to the present results is found by comparing them to the available experimental data.
Hydrogen segregation to vacancies in the surface and subsurface layers of (111) and (100) surfaces of Pd is studied in the density functional theory (DFT) approach. Adsorption energies and configurations of various clusters of H atoms at the vacancies are calculated. The adsorption energy varies for different sites in the vacancies with the distance to the surface from -0.26 eV (close to that of the bulk clusters) to -0.62 eV. Enhanced binding is found for the sites above the pores produced by vacancies in the subsurface layer. For the (111) surface vacancy the most favorable for segregation a…
TiO2 is a technologically important material. In particular, its anatase polymorph plays a major role in photocatalysis, which can also accommodate charged and neutral vacancies. There is, however, scant theoretical work on the vacancy charge and associated diffusion from surface to subsurface and bulk in the literature. Here, we aim to understand +2 charge and neutral vacancy diffusion on anatase (101) surface using 72 and 216 atoms surface slabs employing a semi-local density functional and the Hubbard model. The activation-relaxation technique nouveau (ARTn) coupled with Quantum Espresso is…
We have performed total-energy density-functional calculations using first-principles pseudopotentials to determine the atomic and electronic structure of neutral surface and subsurface vacancies at the GaP(110) surface. The cation as well as the anion surface vacancy show a pronounced inward relaxation of the three nearest neighbor atoms towards the vacancy while the surface point-group symmetry is maintained. For both types of vacancies we find a singly occupied level at mid gap. Subsurface vacancies below the second layer display essentially the same properties as bulk defects. Our results …
Oxygen (O2) adsorbed on metal oxides is important in catalytic oxidation reactions, chemical sensing, and photocatalysis. Strong adsorption requires transfer of negative charge from oxygen vacancies (VOs) or dopants, for example. With scanning tunneling microscopy, we observed, transformed, and, in conjunction with theory, identified the nature of O2 molecules on the (101) surface of anatase (titanium oxide, TiO2) doped with niobium. VOs reside exclusively in the bulk, but we pull them to the surface with a strongly negatively charged scanning tunneling microscope tip. O2 adsorbed as superoxo …
Understanding the structure of ZnO surface reconstructions and their resultant properties is crucial to the rational design of ZnO-containing devices ranging from optoelectronics to catalysts. Here, we are motivated by recent experimental work which showed a new surface reconstruction containing Zn vacancies ordered in a Zn(3x3) pattern in the subsurface of (0001)-O terminated ZnO. A reconstruction with Zn vacancies on (0001)-O is surprising and counterintuitive because Zn vacancies enhance the surface dipole rather than reduce it. In this work, we show using Density Functional Theory (DFT) th…
Anatase is a metastable polymorph of TiO$_2$. In contrast to the more widely-studied TiO$_2$ rutile, O vacancies (V$_\mathrm O$'s) are not stable at the anatase (101) surface. Low-temperature STM shows that surface V$_\mathrm O$'s, created by electron bombardment at 105 K, start migrating to subsurface sites at temperatures $\geq$ 200 K. After an initial decrease of the V$_\mathrm O$ density, a temperature-dependent dynamic equilibrium is established where V$_\mathrm O$'s move to subsurface sites and back again, as seen in time-lapse STM images. We estimate that activation energies for subsurf…
We use density functional calculations to investigate the accommodation and migration of oxygen vacancies in bulk hexagonal YMnO$_3$, and to study interactions between neutral ferroelectric domain walls and oxygen vacancies. Our calculations show that oxygen vacancies in bulk YMnO$_3$ are more stable in the Mn-O layers than in the Y-O layers. Migration barriers of the planar oxygen vacancies are high compared to oxygen vacancies in perovskites, and to previously reported values for oxygen interstitials in h-YMnO$_3$. The calculated polarization decreases linearly with vacancy concentration, wh…
Using a three-dimensional microscopic lattice model of a strong topological insulator (TI) we study potential impurities and vacancies in surface and subsurface positions. For all impurity locations we find impurity-induced resonance states with energy proportional to the inverse of the impurity strength, although the impurity strength needed for a low-energy resonance state increases with the depth of the impurity. For strong impurities and vacancies as deep as 15 layers into the material, resonance peaks will appear at and around the Dirac point in the surface energy spectrum, splitting the …
Oxygen vacancies can be of utmost importance for improving or deteriorating physical properties of oxide materials. Here, we studied from first-principles the electronic and magnetic properties of oxygen vacancies in the double perovskite Sr$_2$FeMoO$_6$ (SFMO). We show that oxygen vacancies can increase the Curie temperature in SFMO, although the total magnetic moment is reduced at the same time. We found also that the experimentally observed valence change of the Fe ions from $3+$ to $2+$ in the x-ray magnetic circular dichroism (XMCD) measurements is better explained by oxygen vacancies tha…
Sodium cobaltate with high Na content is a promising thermoelectric material. It has recently been reported that oxygen vacancies can alter the material properties, reducing its figure of merit. However, experimental data concerning the oxygen stoichiometry are contradictory. We therefore studied the formation of oxygen vacancies in Na_xCoO_2 with first principles calculations, focusing on x = 0.75. We show that a very low oxygen vacancy concentration is expected at the temperatures and partial pressures relevant for applications.
Using density-functional-theory (DFT) calculations with the HSE06 hybrid functional, we accurately evaluate the critical thickness of LaAlO3 film for the intrinsic doping in LaAlO3/SrTiO3 (LAO/STO) heterstructures. The calculated critical thickness of 6 unit-cell (uc) layers suggests to rule out the intrinsic doping mechanism. We also calculate the density of oxygen vacancies on the LAO surface at varying LAO thicknesses, preparation oxygen pressures and temperatures by using the condition of chemical equilibrium and DFT calculations. We find that once LAO thickness >=3 uc high-density (~ 10^1…
Using first-principles density functional theory calculations, we find a strong position and thickness dependence of the formation energy of oxygen vacancies in LaAlO3|SrTiO3 (LAO|STO) multilayers and interpret this with an analytical capacitor model. Oxygen vacancies are preferentially formed at p-type SrO|AlO2 rather than at n-type LaO|TiO2 interfaces; the excess electrons introduced by the oxygen vacancies reduce their energy by moving to the n-type interface. This asymmetric behavior makes an important contribution to the conducting (insulating) nature of n-type (p-type) interfaces while p…
Motivated by recent angle-resolved photoemission spectroscopy (ARPES) observations of a highly metallic two-dimensional electron gas (2DEG) at the (001) vacuum-cleaved surface of SrTiO3 and the subsequent discussion on the possible role of oxygen vacancies for the appearance of such a state (Ref 1), we analyze by means of density functional theory (DFT) the electronic structure of various oxygen-deficient SrTiO3 surface slabs. We find a significant surface reconstruction after introducing oxygen vacancies and we show that the charges resulting from surface-localized oxygen vacancies --independ…
The roles of oxygen vacancies on the electronic and magnetic properties of Ni doped In$_2$O$_3$ have been studied by first-principles calculations based on hybrid functional theory. Our results predict that the Ni-doped In$_2$O$_3$ system displays a ferromagnetic semiconducting character. However, the presence of oxygen vacancies results in antiferromagnetic coupling between the neighboring Ni pair bridged by an oxygen vacancy. The antiferromagnetic coupling is found to arise from the predominant role of superexchange due to the strong Ni 3d-O 2p hybridization. Consequently, the oxygen vacanci…
We report the enthalpy of oxygen vacancy formation in thin films of electron-doped SrTiO$_{3}$, under different degrees of epitaxial stress. We demonstrate that both compressive and tensile strain decrease this energy at a very similar rate, and promote the formation of stable doubly ionized oxygen vacancies. Moreover, we also show that unintentional cationic vacancies introduced under typical growth conditions, produce a characteristic rotation pattern of TiO$_6$ octahedra. The local concentration of oxygen vacancies can be modulated by an electric field with an AFM tip, changing not only the…
In this paper we study the effect of normal and shear strains and oxygen vacancies on the structure of 180^o ferroelectric domain walls in PbTiO_3. It is known that oxygen vacancies move to the domain walls and pin them. Hence, we assume a periodic arrangement of oxygen vacancies on both Pb-centered and Ti-centered domain walls in PbTiO_3. We use a semi-analytic anharmonic lattice statics method for obtaining the relaxed configurations using a shell potential. In agreement with recent ab initio calculations, we observe that a Pb-centered domain wall with oxygen vacancies is not stable even und…
The consideration of oxygen vacancies influence on the relaxors with perovskite structure was considered in the framework of Landau-Ginzburg-Devonshire phenomenological theory. The theory applicability for relaxors is based on the existence of some hidden soft phonon polar mode in them, and its frequency could be zero at some negative temperature TC*. Main attention was paid to PZN-PLZT relaxor described by formula 0.3Pb(Zn1/3Nb2/3)O3-0.7(Pb0.96La0.04(ZrxTi1-x)0.99O3) with x = 0.52, where earlier experimental investigation of oxygen vacancies influence on the polar properties was performed and…
In this work we study the electronic structure and magnetism of a TiO2 film grown on another non-magnetic oxide such as a LaAlO3 (001) substrate, concentrating on the role played by structural relaxation and oxygen vacancies. Using Density Functional Theory ab-initio methods, we study the free-standing anatase film as well as the interfaces with either the LaO or AlO2 planes of LaAlO3, focusing on the possibility of magnetic solutions. Our results show that the interface LaO/TiO2 is favored against the AlO2/TiO2 one if no oxygen vacancies are present in the interface whereas the contrary happe…
State Key Laboratory of Silicon and Advanced Semiconductor Materials and Center of Electron Microscopy, School of Materials Science and Engineering, Zhejiang University（浙江大学材料科学与工程学院）；Yusuf Hamied Department of Chemistry, University of Cambridge（剑桥大学化学系）；Institute of Fundamental and Transdisciplinary Research, Zhejiang University（浙江大学基础与交叉研究院）；Zhejiang Key Laboratory of Low-Carbon Synthesis of Value-Added Chemicals（斯科尔科沃科学技术研究所）；Skolkovo Institute of Science and Technology
The quantum Hall conductance in monolayer graphene on an epitaxial SrTiO3 (STO) thin film is studied to understand the role of oxygen vacancies in determining the dielectric properties of STO. As the gate voltage sweep range is gradually increased in our device, we observe systematic generation and annihilation of oxygen vacancies evidenced from the hysteretic conductance behavior in graphene. Furthermore, based on the experimentally observed linear scaling relation between the effective capacitance and the voltage sweep range, a simple model is constructed to manifest the relationship among t…
The incorporation of oxygen atoms has been simulated into either nitrogen or uranium vacancy at the UN(001) surface, sub-surface or central layers. For calculations on the corresponding slab models both the relativistic pseudopotentials and the method of projector augmented-waves (PAW) as implemented in the VASP computer code have been used. The energies of O atom incorporation and solution within the defective UN surface have been calculated and discussed. For different configurations of oxygen ions at vacancies within the UN(001) slab, the calculated density of states and electronic charge r…
The results of a comprehensive and systematic ab-initio based ground-state search for the structural arrangement of oxygen vacancies in rutile phase TiO$_2$ provide new insights into their memristive properties. We find that O vacancies tend to form planar arrangements which relax into structures exhibiting metallic behavior. These meta-stable arrangements are structurally akin to, yet distinguishable from the Magnéli phase. They exhibit a more pronounced metallic nature, but are energetically less favorable. Our results confirm a clear structure-property relationship between segregated oxygen…
We use first-principles calculations based on density functional theory to investigate the interplay between oxygen vacancies, A-site cation size / tolerance factor, epitaxial strain, ferroelectricity and magnetism in the perovskite manganite series, AMnO3 (A=Ca2+, Sr2+, Ba2+). We find that, as expected, increasing the volume through either chemical pressure or tensile strain generally lowers the formation energy of neutral oxygen vacancies consistent with their established tendency to expand the lattice. Increased volume also favors polar distortions, both because competing rotations of the o…
Tungsten trioxide (WO$_3$) is a paradigmatic electrochromic material, whose peculiar optical properties in the presence of oxygen vacancies or intercalated alkali atoms have been observed and investigated for a long time. In this paper we propose a rationalization of experiments based on first-principles calculations of optical and electrical properties of oxygen deficient (reduced) WO$_3$. Our approach is based on a parameter-free dielectric-dependent hybrid density functional methodology, used in combination with the charge transition levels formalism, for studying excitation mechanisms in t…
We evaluate the interplay between epitaxial strain and oxygen vacancy formation in the perovskite-structure oxide lanthanum aluminate, LaAlO$_3$. Using density functional theory within the GGA$+U$ approximation we calculate the dependence of the oxygen vacancy formation energy on the biaxial strain conditions. We find that the change in formation energy with strain is negligible over the range of strain values usually accessible through coherent epitaxial growth. Our findings suggest that experimental reports of different oxygen vacancy concentrations in strained films result from extrinsic fa…
The microscopic mechanism leading to stabilization of cubic and tetragonal forms of zirconia (ZrO$_2$) is analyzed by means of a self-consistent tight-binding model. Using this model, energies and structures of zirconia containing different vacancy concentrations are calculated, equivalent in concentration to the charge compensating vacancies associated with dissolved yttria (Y$_2$O$_3$) in the tetragonal and cubic phase fields (3.2 and 14.4% mol respectively). The model is shown to predict the large relaxations around an oxygen vacancy, and the clustering of vacancies along the $<111 >$ direc…
The ability to manipulate oxygen anion defects rather than metal cations in complex oxides can facilitate creating new functionalities critical for emerging energy and device technologies. However, the difficulty in activating oxygen at reduced temperatures hinders the deliberate control of important defects, oxygen vacancies. Here, strontium cobaltite (SrCoOx) is used to demonstrate that epitaxial strain is a powerful tool for manipulating the oxygen vacancy concentration even under highly oxidizing environments and at annealing temperatures as low as 300 C. By applying a small biaxial tensil…
Density functional theory calculations indicate that the incorporation of V into Ti lattice positions of rutile TiO2 leads to magnetic V4+ species, but the extension and sign of the coupling between dopant moments confirm that ferromagnetic order cannot be reached via low-concentration doping in the non-defective oxide. Oxygen vacancies can introduce additional magnetic centres, and we show here that one of the effects of vanadium doping is to reduce the formation energies of these defects. In the presence of both V dopants and O vacancies all the spins tend to align with the same orientation.…
We perform first-principles calculations of the quasiparticle defect states, charge transition levels, and formation energies of oxygen vacancies in rutile titanium dioxide. The calculations are done within the recently developed combined DFT+GW formalism, including the necessary electrostatic corrections for the supercells with charged defects. We find the oxygen vacancy to be a negative U defect, where U is the defect electron addition energy. For the values of Fermi level below 2.8 eV (relative to the valence band maximum) we find the +2 charge state of the vacancy to be the most stable, wh…
We calculate the quasiparticle defect states and charge transition levels of oxygen vacancies in monoclinic hafnia. The charge transition levels, although they are thermodynamic quantities, can be critically dependent on the band gap owing to localized defect states. These quasiparticle defect level effects are treated using the first principle GW approximation to the self energy. We show that the quality and reliability of the results may be evaluated by calculating the same transition level via two physical paths and that it is important to include the necessary electrostatic corrections in …
The surface reconstruction of SrTiO$_3$(110) is studied with scanning tunneling microscopy and density functional theory (DFT) calculations. The reversible phase transition between (4$\times$1) and (5$\times$1) is controlled by adjusting the surface metal concentration [Sr] or [Ti]. Resolving the atomic structures of the surface, DFT calculations verify that the phase stability changes upon the chemical potential of Sr or Ti. Particularly, the density of oxygen vacancies is low on the thermodynamically stabilized SrTiO$_3$(110) surface.
The influence of the electric field and electric current on the behavior of oxygen vacancies (VOs) in TiO2 anatase was investigated with Scanning Tunneling Microscopy (STM). At the anatase (101) surface VOs are not stable; they migrate into the bulk at temperatures above 200 K. Scanning a clean anatase (101) surface at a sample bias greater than +4.3 V results in surface VOs in the scanned area, suggesting that subsurface VOs migrate back to the surface. To test this hypothesis, surface VOs were first created through bombardment with energetic electrons. The sample was then mildly annealed, wh…
We investigated the role of oxygen vacancy in n-type interface of LaAlO3 (LAO) overlayer on SrTiO3 (STO) (001) by carrying out density-functional-theory calculations. Comparing the total energies of the configurations with one vacancy in varying locations we found that oxygen vacancies favor to appear first in LAO surface. These oxygen vacancies in the surface generate a two-dimensional distribution of carriers at the interface, resulting in band bending at the interface in STO side. Dependent on the concentration of oxygen vacancies in LAO surface, the induced carrier charge at the interface …
Oxygen vacancies are increasingly recognized to play a role in phenomena observed at transition-metal oxide interfaces. Here we report a study of SrRuO3/La0.7Sr0.3MnO3 (SRO/LSMO) interfaces using a combination of quantitative aberration-corrected scanning transmission electron microscopy, electron energy loss spectroscopy, and density-functional calculations. Cation displacements are observed at the interface, indicative of a dipole-like electric field even though both materials are nominally metallic. The observed displacements are reproduced by theory if O vacancies are present in the near-i…
Modifications of the electronic bands of thin FeSe films due to oxygen vacancies in the supporting SrTiO 3 (001) substrate - and the interplay with spin-orbit coupling, magnetism, and epitaxy - are investigated by first-principles supercell calculations. Unfolded (k-projected) bands show that the oxygen vacancies both provide electron doping to the interface FeSe layer and also have notable effects on the details of the bands around the Fermi level, including renormalizing the width of the Fe-3d band near the Fermi level by a factor of about 0.6, and causing a splitting of ~40 meV at the M poi…
The electronic structure of SrTiO3(001) surfaces was studied using scanning tunneling spectroscopy and density-functional theory. With high dynamic range measurements, an in-gap transition level was observed on SrO-terminated surfaces, at 2.7 eV above the valence band maximum. The density of centers responsible for this level was found to increase with surface segregation of oxygen vacancies and decrease with exposure to molecular oxygen. Based on these finding, the level is attributed to surface O vacancies. A level at a similar energy is predicted theoretically on SrO-terminated surfaces. Fo…
Oxygen vacancy (VO) is a common native point defects that plays crucial roles in determining the physical and chemical properties of metal oxides such as ZnO. However, fundamental understanding of VO is still very sparse. Specifically, whether VO is mainly responsible for the n-type conductivity in ZnO has been still unsettled in the past fifty years. Here we report on a study of oxygen self-diffusion by conceiving and growing oxygen-isotope ZnO heterostructures with delicately-controlled chemical potential and Fermi level. The diffusion process is found to be predominantly mediated by VO. We …
There is considerable interest in the pH-dependent switchable biocatalytic properties of cerium oxide nanoparticles (CeNPs) in biomedicine, where these materials exhibit beneficial antioxidant activity against reactive oxygen species at neutral and basic physiological pH but cytotoxic prooxidant activity at acidic pathological pH. Oxygen vacancies play a key role in such biocatalytic activities. While the general characteristics of the role of oxygen vacancies are known, the mechanism of their action at the atomic scale under different pH conditions has yet to be elucidated. The present work a…
Thermodynamic, structural and electronic properties of isolated copper and iron atoms as well as their complexes with oxygen vacancies in tetragonal lead titanate are investigated by means of first principles calculations. Both dopants exhibit a strong chemical driving force for the formation of M_Ti-V_O (M = Cu, Fe) defect associates. The most stable configurations corresponds to a local dipole aligned along the tetragonal axis parallel to the spontaneous polarization. Local spin moments are obtained and the calculated spin densities are discussed. The calculations provide a simple and consis…
Oxygen vacancies in transition metal oxides facilitate catalysis critical for energy storage and generation. However, it has proven elusive to promote vacancies at the lower temperatures required for operation in devices such as metal-air batteries and portable fuel cells. Here, we use thin films of the perovskite-based strontium cobaltite (SrCoOx) to show that epitaxial strain is a powerful tool towards manipulating the oxygen content under conditions consistent with the oxygen evolution reaction, yielding increasingly oxygen deficient states in an environment where the cobaltite would normal…
We use first-principles methods to investigate the effects of collective lattice excitations on the formation of oxygen vacancies in perovskite thin films. We find that phonons play a crucial role on the strain-mediated control of defect chemistry at finite temperatures. In particular, zero-temperature oxygen vacancy formation trends deduced as a function of epitaxial strain can be fully reversed near room temperature. Our first-principles calculations evidence a direct link between the lattice contribution to the oxygen vacancy free energy and the volume expansion that the system undergoes wh…
Hydroxyapatite (HAp) is a widely used biomaterial for the preparation of bone and dental implants. Despite the relevance of HAp in medicine, exciting applications involving this material as a bio-compatible photocatalyst, depend on how well we understand its fundamental properties. Experimental evidence suggests that oxygen vacancies play a critical role in the production of surface radicals upon exposure of HAp to ultra-violet (UV) light. However, very little is known about the underlying physical and chemical details. We present a hybrid density-functional study of the structural and electro…
We investigate the behavior of oxygen vacancies in three different metal-oxide semiconductors (rutile and anatase TiO2, monoclinic WO3, and tetragonal ZrO2) using a recently proposed hybrid density-functional method in which the fraction of exact exchange is material-dependent but obtained ab initio in a self-consistent scheme. In particular, we calculate charge-transition levels relative to the oxygen-vacancy defect and compare computed optical and thermal excitation/emission energies with the available experimental results, shedding light on the underlying excitation mechanisms and related m…
Oxygen vacancies in two-dimensional metal-oxide structures garner much attention due to unique conductive, magnetic and even superconductive functionalities they induce. Ferroelectric domain walls have been a prominent recent example because they serve as a hub for topological defects that enable unusual symmetries and are relevant for low-energy switching technologies. However, owing to the light weight of oxygen atoms and localized effects of their vacancies, the atomic-scale electrical and mechanical influence of oxygen vacancies has remained elusive. Here, stable individual oxygen vacancie…
Understanding the diffusion of oxygen vacancies in oxides under different external stimuli is crucial for the design of ion-based electronic devices, improve catalytic performance, etc. In this manuscript, using an external electric field produced by an AFM tip, we obtain the room-temperature diffusion coefficient of oxygen-vacancies in thin-films of SrTiO$_3$ under compressive/tensile epitaxial strain. Tensile strain produces a substantial increase of the diffusion coefficient, facilitating the mobility of vacancies through the film. Additionally, the effect of tip bias, pulse time, and tempe…
We demonstrate a thermodynamic formulation to quantify defect formation energetics in an insulator under high electric field. As a model system, we analyzed neutral oxygen vacancies (color centers) in alkaline-earth-metal binary oxides using density functional theory, Berry phase calculations, and maximally localized Wannier functions. Work of polarization lowers the field dependent electric Gibbs energy of formation of this defect. This is attributed mainly to the ease of polarizing the two electrons trapped in the vacant site, and secondarily to the defect induced reduction in bond stiffness…
Luminescence quenching via non-radiative recombination channels limits the efficiency of optical materials such as phosphors and scintillators and therefore has implications for conversion efficiency and device lifetimes. In materials such as Ce-doped yttrium aluminum garnet (YAG:Ce), quenching shows a strong dependence on both temperature and activator concentration, limiting the ability to fabricate high-intensity white-light emitting diodes with high operating temperatures. Here, we reveal by means of first-principles calculations an efficient recombination mechanism in YAG:Ce that involves…
Catalysis is indispensable to chemical processes and relevant to many aspects of modern life. Owing to the intriguing electronic structures and good ionic properties, multivalent transition metal oxides have attracted attention as key catalysts for various energy and environmental applications. Here, we demonstrate that brownmillerite strontium cobaltite (SrCoO2.5) can be a good cathode material for sold oxide fuel cells and rechargeable batteries due to the open oxygen frameworks. When the orientation of oxygen vacancy channels (OVCs) is properly controlled, one can drastically increase the s…
Controlling functionalities, such as magnetism or ferroelectricity, by means of oxygen vacancies (VO) is a key issue for the future development of transition metal oxides. Progress in this field is currently addressed through VO variations and their impact on mainly one order parameter. Here we reveal a new mechanism for tuning both magnetism and ferroelectricity simultaneously by using VO. Combined experimental and density-functional theory studies of Eu0.5Ba0.5TiO3-δ, we demonstrate that oxygen vacancies create Ti3+ 3d1 defect states, mediating the ferromagnetic coupling between the localize…
The introduction of manganite buffer layers, La7/8Sr1/8MnO3 (LSMO) in particular, at the metallic interface between SrTiO3 (STO) and another band insulator suppresses the carrier density of the interfacial two-dimensional electron gas (2DEG) and improves significantly the electron mobility. However, the mechanisms underlying the extreme mobility enhancement remain elusive. Herein, we used 18O isotope exchanged SrTi18O3 as substrates to create 2DEG at room temperature with and without the LSMO buffer layer. By mapping the oxygen profile across the interface between STO18 and disordered LaAlO3 o…
Oxygen-vacancies-related dielectric relaxation and scaling behaviors of Bi0.9La0.1Fe0.98Mg0.02O3 (BLFM) thin film have been investigated by temperature-dependent impedance spectroscopy from 40 oC up to 200 oC. We found that hopping electrons and single-charged oxygen vacancies (VO.) coexist in the BLFM thin film and make contribution to dielectric response of grain and grain boundary respectively. The activation energy for VO. is shown to be 0.94 eV in the whole temperature range investigated, whereas the distinct activation energies for electrons are 0.136 eV below 110oC and 0.239 eV above 11…
Extrinsic levels, formation energies, and relaxation geometries are calculated ab initio for oxygen vacancies in alpha-quartz SiO2. The vacancy is found to be thermodynamically stable in the charge states Q=+3, Q=0, Q=--2, and Q=-3. The charged states are stabilized by large and asymmetric distortions near the vacancy site. Concurrently, Franck-Condon shifts for absorption and recombination related to these states are found to be strongly asymmetric. In undoped quartz, the ground state of the vacancy is the neutral charge state, while for moderate p-type and n-type doping, the +3 and -3 states…
Spin polarized current is the main ingredient of diluted magnetic oxides due to its potential manipulation in spintronic devices. However, most research has focused on ferromagnetic properties rather than polarization of electric current, because direct measurements were difficult and the origin of spin polarized currents has yet to be fully understood. The method to increase the spin polarized current percentage is beyond practical consideration at the present status. To target this problem, we focus on the role of oxygen vacancies and nano grain size on the spin polarized current, which are …
Supercapacitors have recently gained popularity as possible energy storage systems due to their high cycling ability and increased power density. However, one of the major drawbacks of supercapacitors is that they have a low energy density, which makes them less effective than batteries. Herein, we explore different methods of increasing the supercapacitor performance of the perovskite SrCoO3. We carry out first-principles calculations to systematically study how SrCoO3/graphene interface, oxygen vacancies, and doping improve the performance of strontium cobaltite as an anion-intercalation-typ…
Oxygen vacancies in strontium titanate surfaces (SrTiO3) have been linked to the presence of a two-dimensional electron gas with unique behavior. We perform a detailed density functional theory study of the lattice and electronic structure of SrTiO3 slabs with multiple oxygen vacancies, with a main focus on two vacancies near a titanium dioxide terminated SrTiO3 surface. We conclude based on total energies that the two vacancies preferably inhabit the first two layers, i.e. they cluster vertically, while in the direction parallel to the surface, the vacancies show a weak tendency towards equal…
We present a systematic study of the effect of Y doping and hydration level on the structural transformations of BaCeO3 based on anelastic spectroscopy experiments. The temperature of the intermediate transformation between rhombohedral and orthorhombic Imma phases rises with increasing the molar fraction x of Y roughly as (500 K)x in the hydrated state, and is depressed of more than twice that amount after complete dehydration. This is explained in terms of the effect of doping on the average (Ce/Y)-O and Ba-O bond lengths, and of lattice relaxation from O vacancies. The different behavior of…
