We test the performance of a recently proposed fundamental measure density functional of aligned hard cylinders by calculating the phase diagram of a monodisperse fluid of these particles. We consider all possible liquid crystalline symmetries, namely nematic, smectic and columnar, as well as the crystalline phase. For this purpose we introduce a Gaussian parameterization of the density profile and use it to minimize numerically the functional. We also determine, from the analytic expression for the structure factor of the uniform fluid, the bifurcation points from the nematic to the smectic and columnar phases. The equation of state, as obtained from functional minimization, is compared to the available Monte Carlo simulation. The agreement is is very good, nearly perfect in the description of the inhomogeneous phases. The columnar phase is found to be metastable with respect to the smectic or crystal phases, its free energy though being very close to that of the stable phases. This result justifies the observation of a window of stability of the columnar phase in some simulations, which disappears as the size of the system increases. The only important deviation between theory and simulations shows up in the location of the nematic-smectic transition. This is the common drawback of any fundamental measure functional of describing the uniform phase just with the accuracy of scaled particle theory.
We obtain a fundamental measure density functional for mixtures of parallel hard cylinders. To this purpose we first generalize to multicomponent mixtures the fundamental measure functional proposed by Tarazona and Rosenfeld for a one-component hard disk fluid, through a method alternative to the cavity formalism of these authors. We show the equivalence of both methods when applied to two-dimensional fluids. The density functional so obtained reduces to the exact density functional for one-dimensional mixtures of hard rods when applied to one-dimensional profiles. In a second step we apply an…
In this article we consider systems of parallel hard {\it superellipsoids}, which can be viewed as a possible interpolation between ellipsoids of revolution and cylinders. Superellipsoids are characterized by an aspect ratio and an exponent $α$ (shape parameter) which takes care of the geometry, with $α=1$ corresponding to ellipsoids of revolution, while $α=\infty$ is the limit of cylinders. It is well known that, while hard parallel cylinders exhibit nematic, smectic, and solid phases, hard parallel ellipsoids do not stabilize the smectic phase, the nematic phase transforming directly into a …
We explore the relative stability of three possible orientations of cylinder-forming di-block copolymer on a sinusoidally corrugated substrate. The cylinders can be aligned either parallel to the substrate, with their long axis being oriented along or orthogonal to the corrugation trenches, or perpendicular to the substrate. Using self-consistent field theory, we investigate the influence of substrate roughness and surface preference on the phase transition between the three orientations. When the substrate preference, $u$, towards one of components is small, increasing the substrate roughness…
We apply a recently proposed density functional for mixtures of parallel hard cylinders, based on Rosenfeld's fundamental measure theory, to study the effect of length-polydispersity on the relative stability between the smectic and columnar liquid crystal phases.To this purpose we derive from this functional an expression for the direct correlation function and use it to perform a bifurcation analysis. We compare the results with those obtained with a second and a third virial approximation of this function. All three approximations lead to the same conclusion: there is a terminal polydispers…
We derive, from the dimensional cross-over criterion, a fundamental-measure density functional for parallel hard curved rectangles moving on a cylindrical surface. We derive it from the density functional of circular arcs of length $σ$ with centers of mass located on an external circumference of radius $R_0$. The latter functional in turns is obtained from the corresponding 2D functional for a fluid of hard discs of radius $R$ on a flat surface with centers of mass confined onto a circumference of radius $R_0$. Thus the curved length of closest approach between two centers of mass of hard disc…
We calculate the friction force acting on a hard cylinder or spherical ball rolling on a flat surface of a viscoelastic solid. The rolling friction coefficient depends non-linearly on the normal load and the rolling velocity. For a cylinder rolling on a viscoelastic solid characterized by a single relaxation time Hunter has obtained an exact result for the rolling friction, and our result is in very good agreement with his result for this limiting case. The theoretical results are also in good agreement with experiments of Greenwood and Tabor. We suggest that measurements of rolling friction o…
We investigate the effects of extrinsic curvature on the turbulent behavior of a 2D active nematic confined to the surface of a cylinder. The surface of a cylinder has no intrinsic curvatrue and only extrinsic curvature. A nematic field reacts to the extrinsic curvature by trying to align with the lowest principle curvature, in this case parallel to the long axis of the cylinder. When nematics are sufficiently active, there is a proliferation of defects arising from a bend or splay instability depending on the nature of the active stress. The extrinsic curvature of the cylinder beaks the rotat…
The packing of hard spheres (HS) of diameter $σ$ in a cylinder has been used to model experimental systems, such as fullerenes in nanotubes and colloidal wire assembly. Finding the densest packings of HS under this type of confinement, however, grows increasingly complex with the cylinder diameter, $D$. Little is thus known about the densest achievable packings for $D>2.873σ$. In this work, we extend the identification of the packings up to $D=4.00σ$ by adapting Torquato-Jiao's adaptive-shrinking-cell formulation and sequential-linear-programming (SLP) technique. We identify 17 new structures,…
We use the Parsons Lee modification of Onsagers second virial theory within the restricted orientation approximation to analyse the phase behaviour of hard cylindrical rods confined in narrow pores Depending on the wall to wall separation we predict a number of distinctly different surface generated nematic phases including a biaxial planar nematic with variable number of layers a monolayer homeotropic and a hybrid T type structure For narrow pores we find evidence of two types of second order uniaxial biaxial transitions depending on the aspect ratio of the particles More specifically we obse…
Hard spheres are an important benchmark of our understanding of natural and synthetic systems. In this work, colloidal experiments and Monte Carlo simulations examine the equilibrium and out-of-equilibrium assembly of hard spheres of diameter $σ$ within cylinders of diameter $σ\leq D\leq 2.82σ$. Although in such a system phase transitions formally do not exist, marked structural crossovers are observed. In simulations, we find that the resulting pressure-diameter structural diagram echoes the densest packing sequence obtained at infinite pressure in this range of $D$. We also observe that the …
The rich variety of densest columnar structures of identical hard spheres inside a cylinder can surprisingly be constructed from a simple and computationally fast sequential deposition of cylinder-touching spheres, if the cylinder-to-sphere diameter ratio D is within [1,2.7013]. This provides a direction for theoretically deriving all these densest structures and for constructing such densest packings with nano-, micro-, colloidal or charged particles, which all self-assemble like hard spheres.
Using isobaric Monte Carlo simulations, we map out the entire phase diagram of a system of hard cylindrical particles of length $L$ and diameter $D$, using an improved algorithm to identify the overlap condition between two cylinders. Both the prolate $L/D>1$ and the oblate $L/D<1$ phase diagrams are reported with no solution of continuity. In the prolate $L/D>1$ case, we find intermediate nematic \textrm{N} and smectic \textrm{SmA} phases in addition to a low density isotropic \textrm{I} and a high density crystal \textrm{X} phase, with \textrm{I-N-SmA} and \textrm{I-SmA-X} triple points. An …
We study the optimal packing of hard spheres in an infinitely long cylinder, using simulated annealing, and compare our results with the analogous problem of packing disks on the unrolled surface of a cylinder. The densest structures are described and tabulated in detail up to D/d=2.873 (ratio of cylinder and sphere diameters). This extends previous computations into the range of structures which include internal spheres that are not in contact with the cylinder.
We develop a simple analytical theory that relates dense sphere packings in a cylinder to corresponding disk packings on its surface. It applies for ratios R=D/d (where d and D are the diameters of the hard spheres and the bounding cylinder, respectively) up to R=1+1/sin(pi/5). Within this range the densest packings are such that all spheres are in contact with the cylindrical boundary. The detailed results elucidate extensive numerical simulations by ourselves and others by identifying the nature of all competing phases.
Self-Consistent Field Theory is applied to a film of cylindrical-forming block copolymer subject to a surface field which tends to align the cylinders parallel to electrical plates, and to an external electric field tending to align them perpendicular to the plates. The Maxwell equations and self-consistent field equations are solved exactly, numerically, in real space. By comparing the free energies of different configurations, we show that for weak surface fields, the phase of cylinders parallel to the plates makes a direct transition to a phase in which the cylinders are aligned with the fi…
The phase behavior of the system of parallel rigid triblock copolymers is examined using the second-virial density functional theory. The triblock particle consists of two identical infinitely thin hard rods of finite lengths on the opposite ends of one central hard cylinder with nonzero length and diameter. Stability analyses and free energy calculations show that the system of parallel particles can form not only uniform nematic and smectic A phases, but a smectic-C phase too. The stability and structure of the tilted structure is controlled by only the diameter and the length of the central…
The phase behavior of helical packings of thermoresponsive microspheres inside glass capillaries is studied as a function of volume fraction. Stable packings with long-range orientational order appear to evolve abruptly to disordered states as particle volume fraction is reduced, consistent with recent hard sphere simulations. We quantify this transition using correlations and susceptibilities of the orientational order parameter psi_6. The emergence of coexisting metastable packings, as well as coexisting ordered and disordered states, is also observed. These findings support the notion of ph…
We present a regularization of the recently proposed fundamental-measure functional for a mixture of parallel hard cubes. The regularized functional is shown to have right dimensional crossovers to any smaller dimension, thus allowing to use it to study highly inhomogeneous phases (such as the solid phase). Furthermore, it is shown how the functional of the slightly more general model of parallel hard parallelepipeds can be obtained using the zero-dimensional functional as a generating functional. The multicomponent version of the latter system is also given, and it is suggested how to reformu…
Chiral Packings in Cylinders are Ultrasensitive to Confinement Deformation
School of Physics and Key Laboratory of Functional Polymer Materials of Ministry of Education, Nankai University, and Collaborative Innovation Center of Chemical Science and Engineering（南开大学物理科学学院、教育部功能高分子材料重点实验室及化工协同创新中心）
This paper deals with a concept for a reconfigurable structure bio-inspired by the cell wall architecture of euglenids, a family of unicellular protists, and based on the relative sliding of adjacent strips. Uniform sliding turns a cylinder resulting from the assembly of straight and parallel strips into a cylinder of smaller height and larger radius, in which the strips are deformed into a family of parallel helices. We examine the mechanics of this cylindrical assembly, in which the interlocking strips are allowed to slide freely at their junctions, and compute the external forces (axial for…
We calculate the mean end-to-end distance ($R$) of a self-avoiding polymer encapsulated in an infinitely long cylinder with radius $D$. A self-consistent perturbation theory is used to calculate $R$ as a function of $D$ for impenetrable hard walls and soft walls. In both cases, $R$ obeys the predicted scaling behavior in the limit of large and small $D$. The crossover from the three dimensional behavior ($D\to\infty$) to the fully stretched one dimensional case ($D\to 0$) is non-monotonic. The minimum value of $R$ is found at $D\sim 0.46 R_F$, where $R_F$ is the Flory radius of $R$ at $D \to \…
