A lattice model is used to estimate the self-diffusivity of entangled cyclic and linear polymers in blends of varying compositions. To interpret simulation results, we suggest a minimal model based on the physical idea that constraints imposed on a cyclic polymer by infiltrating linear chains have to be released, before it can diffuse beyond a radius of gyration. Both, the simulation, and recently reported experimental data on entangled DNA solutions support the simple model over a wide range of blend compositions, concentrations, and molecular weights.
We perform a thermodynamic analysis of the polymerization-induced phase separation in nanoparticle-monomer-polymer blends using a simple model recently proposed by V. V. Ginzburg (Macromolecules 2005, 38, 2362.). The model was adapted for ternary blends constituted by nanoparticles, a monomer and a linear polymer, where the relative fractions of polymer and monomer determine the conversion in the polymerization reaction. The analysis showed that phase separation can occur in the course of polymerization for a large range of values of the relevant parameters (interaction parameter, and polymer …
Extensive molecular simulations are applied to characterize the equilibrium dynamics, entanglement topology, and nonlinear extensional rheology of symmetric ring-linear polymer blends with systematically varied ring fraction $ϕ_R$. Chains with degree of entanglement $Z\approx14$ mixed to produce 10 well-entangled systems with $ϕ_R$ varying from neat linear to neat ring melts. Primitive path analysis are used to visualize and quantify the structure of the composite ring-linear entanglement network. We directly measure the quantity of ring-linear threading and linear-linear entanglement as a fun…
A grand challenge in designing polymeric materials is to tune their properties by macromolecular engineering. In this context, one of the drawbacks that often limits broader applications under high temperature conditions is their poor thermal conductivity $κ$. Using molecular dynamics simulations, we establish a structure-property relationship in hydrogen bonded polymer blends for possible improvement of $κ$. For this purpose, we investigate two experimentally relevant hydrogen bonded systems -- one system consists of short poly({N}-acryloyl piperidine) (PAP) blended with longer chains of poly…
Organic solar cells (OSCs) based on ADA-type (acceptor-donor-acceptor) non-fullerene acceptors (NFAs) exhibit improved power conversion efficiency (PCE) compared to the conventional fullerene-based analogues. The optoelectronic properties of OSC active layer blends are correlated to their underlying structural dynamics and therefore influence the device performance. Using synergistically different neutron spectroscopy techniques, we studied the dynamics of binary and ternary blends made of the NFAs O-IDTBR and O-IDFBR and the regioregular donor polymer P3HT. Deuteration was considered for a co…
Mixtures of polymers of varying topologies and stiffnesses display complex emergent rheological properties that often cannot be predicted from their single-component counterparts. For example, entangled blends of ring and linear polymers have been shown to exhibit enhanced shear thinning and viscosity, as well as prolonged relaxation timescales, compared to pure solutions of rings or linear chains. These emergent properties arise in part from the synergistic threading of rings by linear polymers. Topology has also been shown to play an important role in composites of flexible (e.g., DNA) and s…
Ring polymers exhibit unique flow properties due to their closed chain topology. Despite recent progress, we have not yet achieved a full understanding of the nonequilibrium flow behavior of rings in nondilute solutions where intermolecular interactions greatly influence chain dynamics. In this work, we directly observe the dynamics of DNA rings in semidilute ring-linear polymer blends using single molecule techniques. We systematically investigate ring polymer relaxation dynamics from high extension and transient and steady-state stretching dynamics in planar extensional flow for a series of …
We have generalized the Edwards' method of collective description of dense polymer systems in terms of effective potentials to polymer blends in the presence of a surface. With this method we have studied conformationally asymmetric athermic polymer blends in the presence of a hard wall to the first order in effective potentials. For polymers with the same gyration radius $R_g$ but different statistical segment lengths $l_{A}$ and $l_{B}$ the excess concentration of stiffer polymers at the surface is derived as $% δρ_{A}(z=0)\sim (l_{B}^{-2}-l_{A}^{-2}){\ln (}R_{g}^{2}/l_{c}^{2}{)%}$, where $l…
The miscibility of polymer blends, a classical problem in polymer science, may be altered, if one or both of the component do not have chain ends. Based on the idea of {\it topological volume}, we propose a mean-field theory to clarify how the topological constraints in ring polymers affect the phase behavior of the blends. While the large enhancement of the miscibility is expected for ring-linear polymer blends, the opposite trend toward demixing, albeit comparatively weak, is predicted for ring-ring polymer blends. Scaling formulas for the shift of critical point for both cases are derived. …
In the present article, we have studied the effect of the salt concentration (LiPF6) on transport properties and ion dynamics of blend solid polymer electrolyte (PEO PAN) prepared by solution cast technique. Fourier transform infrared (FTIR) spectroscopy confirms the presence of microscopic interactions such as polymer ion and ion ion interaction evidenced by a change in peak area of anion stretching mode. The fraction of free anions and ion pairs obtained from the analysis of FTIR implies that both influence the ionic conductivity with different salt concentration. The complex dielectric perm…
We address the general question of how the molecular weight dependence of chain dynamics in unentangled polymers is modified by blending. By dielectric spectroscopy we measure the normal mode relaxation of polyisoprene in blends with a slow matrix of poly(ter-butylstyrene). Unentangled polyisoprene in the blend exhibits strong deviations from Rouse scaling, approaching 'entangled-like' behavior at low temperatures in concomitance with the increase of the dynamic asymmetry in the blend. The obtained results are discussed in the framework of the generalized Langevin equation formalism. On this b…
How local stresses propagate through polymeric fluids, and, more generally, how macromolecular dynamics give rise to viscoelasticity are open questions vital to wide-ranging scientific and industrial fields. Here, to unambiguously connect polymer dynamics to force response, and map stress propagation in macromolecular materials, we present a powerful approach-Optical Tweezers integrating Differential Dynamic Microscopy (OpTiDMM)-that simultaneously imposes local strains, measures resistive forces, and analyzes the motion of the surrounding polymers. Our measurements with blends of ring and lin…
In light of recent advancements in the constitutive modelling of bidisperse and polydisperse entangled linear polymers, we present a new multi fluid generalization of the classic two fluid approximation for flows of inhomogeneous polymer blends. As an application of the model, we consider predictions for the linear and nonlinear dynamics of shear induced demixing (SID) instabilities in blends with bidisperse and lognormal molecular weight distributions. We find that even in the absence of any chemical contrast between component chains, an imposed flow can induce a demixing instability provided…
In this paper, we report dynamic Monte Carlo simulation results on the crystallization of crystalline/crystalline (A/B) symmetric binary polymer blend, wherein the melting temperature of A-polymer is higher than B-polymer. Crystallization of A-polymer precedes the crystallization of B-polymer upon cooling from a homogeneous melt. The morphological development is controlled by the interplay between crystallization and macrophase separation. With increasing segregation strength, smaller and thinner crystals form with lesser crystallinity. During the process, A-polymer crystallizes first followed…
Substrate engineering for steering cell growth is a wide and well-established area of research in the field of modern biotechnology. Here we introduce a micromachining technique to pattern an inert, transparent polymer matrix blended with a photoactive polymer. We demonstrate that the obtained scaffold combines the capability to align with that to photostimulate living cells. This technology can open up new and promising applications, especially where cell alignment is required to trigger specific biological functions, e.g. generate powerful and efficient muscle contractions following an exter…
We investigated the formation of cocontinuous structures in polymer blends. These polymeric bijels (bicontinuous interfacially jammed emulsion gels) were composed of polystyrene oligomer, polybutene and fluorescent hydrophobic silica nanoparticles. A micron-sized cocontinuous morphology was stabilized by a monolayer of silica nanoparticles at the interface. Real-time observation of coalescence dynamics in co-continuous polymer blends stabilized by interfacial particles was for the first time achieved via laser scanning confocal microscopy. We demonstrated that suppression of coalescence arises…
Ring polymers remain a major challenge to our current understanding of polymer dynamics. Experimental results are difficult to interpret because of the uncertainty in the purity and dispersity of the sample. Using both equilibrium and non-equilibrium molecular dynamics simulations we have systematically investigated the structure, dynamics and rheology of perfectly controlled ring/linear polymer blends with chains of such length and flexibility that the number of entanglements is up to about 14 per chain, which is comparable to experimental systems examined in the literature. The smallest conc…
Binary mixtures of semiflexible polymers with the same chain length but different persistence lengths separate into two coexisting different nematic phases when the osmotic pressure of the lyotropic solution is varied. Molecular Dynamics simulations and Density Functional Theory predict phase diagrams either with a triple point, where the isotropic phase coexists with two nematic phases, or a critical point of unmixing within the nematic mixture. The difference in locally preferred bond angles between the constituents drives this unmixing without any attractive interactions between monomers.
Polymer blends consisting of two or more polymers are important for a wide variety of industries and processes, but, the precise mechanism of their thermomechanical behaviour is incompletely understood. In order to understand clearly, it is essential to determine the miscibility and interactions between the components in polymer blend and its macroscopic thermomechanical properties. In this study, we performed experiments on SEBS and isotactic PP blends (SP) as well as molecular dynamics simulations, aiming to know the role played by molecular interactions on the thermomechanical properties. T…
Polymer blends offer an exciting material for various potential applications due to their tunable properties by varying constituting components and their relative composition. Our simulation results unravel an intrinsic relationship between the phase behavior and crystallization characteristics with the relative composition of A- and B-polymer in the system. We report simulation results for non-isothermal and isothermal crystallization with weak and strong segregation strength to elucidate the composition dependent crystallization behavior. With increasing composition of low melting B-polymer,…
By means of computer simulations, we investigate the relaxation of the Rouse modes in a simple bead-spring model for non-entangled polymer blends. Two different models are used for the fast component, namely fully-flexible and semiflexible chains. The latter are semiflexible in the meaning that static intrachain correlations are strongly non-gaussian at all length scales. The dynamic asymmetry in the blend is strongly enhanced by decreasing temperature, inducing confinement effects on the fast component. The dynamics of the Rouse modes show very different trends for the two models of the fast …
Blends of polymers of different topologies, such as ring and supercoiled, naturally occur in biology and often exhibit emergent viscoelastic properties coveted in industry. However, due to their complexity, along with the difficulty of producing polymers of different topologies, the dynamics of topological polymer blends remains poorly understood. We address this void by using both passive and active microrheology to characterize the linear and nonlinear rheological properties of blends of relaxed circular and supercoiled DNA. We characterize the dynamics as we vary the concentration from belo…
We use Brownian dynamics (BD) simulations and single molecule experiments to investigate the influence of topological constraints and hydrodynamic interactions on the dynamics and rheology of solutions of ring-linear polymer blends at the overlap concentration. We find agreement between simulation and experiment in that rings in solution blends exhibit large conformational fluctuations, including extension overshoots in the startup of flow and tumbling and tank-treading at steady state. Ring polymer fluctuations increase with blend fraction of linear polymers and are peaked at a ring Weissenbe…
By taking advantage of the molecular weight dependence of the glass transition of polymers and their ability to form perfectly miscible blends, we propose a way to modify the fragility of a system, from fragile to strong, keeping the same glass properties, i.e. vibrational density of states, mean-square displacement and local structure. Both slow and fast dynamics are investigated by calorimetry and neutron scattering in an athermal polystyrene/oligomer blend, and compared to those of a pure 17-mer polystyrene considered to be a reference, of same Tg. Whereas the blend and the pure 17-mer have…
We present a generalized theory for studying phase separation in blends of polymers containing dipoles on their backbone. The theory is used to construct co-existence curves and to study the effects of dipolar interactions on interfacial tension for a planar interface between the coexisting phases. We show that a mismatch in monomeric dipole moments, or equivalently a mismatch in the dielectric constant of the pure components, leads to destabilization of the homogeneous phase. Corrections to the Flory-Huggins phase diagram are predicted using the theory. Furthermore, we show that the interfaci…
We develop thin films of blends of polystyrene (PS) with the thermoresponsive polymer poly(N-isopropylacrylamide) (PNIPAM) (PS/PNIPAM) and its diblock copolymer polystyrene-b-poly(N-isopropylacrylamide) (PS/PS-b-PNIPAM) in different blend ratios and we study their surface morphology and thermoresponsive wetting behaviour. The blends of PS/PNIPAM and PS/PS-b-PNIPAM are spin-casted on flat silicon surfaces with various drying conditions. The surface morphology of the films depends on the blend ratio and the drying conditions. The PS/PS-b-PNIPAM films do not show an increase of their water contac…
In the gelation theory it has been implicitly assumed that (I) a cyclic bond is a finite bond that returns to itself; (II) cyclic bonds distribute at random in network structures. In this paper these two assumptions are reexamined from a new point of view. The physical soundness of the assumptions is assessed through comparison with experimental observations.
The size of rings (also called cyclic polymers) in bidisperse blends of chemically identical rings is analyzed by computer simulations. Data of entangled ring blends and blends of interpenetrating rings are compared and it is shown that the compression of entangled rings can be explained by the changes in the penetrable fraction of the minimal surface bounded by the ring. Corrections for small rings can be approximated by a concatenation probability $1-P_{OO}$ that a ring entraps at least one other ring. Both results are in line with a previous work [1] to explain the compression of entangled …
The formation of interface from an initial sharp interface in polydisperse A/B blends is studied using the external potential dynamic method. The present model is a nonlocal coupling model as we take into account the correlation between segments in a single chain. The correlation is approximately expressed by Debye function and the diffusion dynamics are based on the Rouse chain model. The chain length distribution is described by the continuous Schulz distribution. Our numerical calculation indicates that the broadening of interface with respect to time obeys a power law at early times, and t…
We present a neutron spectroscopy based method to study quantitatively the partial miscibility and phase behaviour of an organic photovoltaic active layer made of conjugated polymer:small molecule blends, presently illustrated with the regio-random poly(3-hexylthiophene-2,5-diyl) and fullerene [6,6]-Phenyl C$_{61}$ butyric acid methyl ester (RRa-P3HT:PCBM) system. We perform both inelastic neutron scattering and quasi-elastic neutron scattering measurements to study the structural dynamics of blends of different compositions enabling us to resolve the phase behaviour. The difference of neutron…
Entangled ring polymers, along with blends of ring and linear polymers, continue to be a topic of great interest and debate due to the conflicting experimental results in the literature as well as the difficulty of producing entangled synthetic rings devoid of linear contaminants. Here, we create blended solutions of entangled ring and linear DNA with varying mass fractions of linear DNA. We use optical tweezers microrheology to measure the linear and nonlinear viscoelastic response of these blends. Our measurements reveal a strong non-monotonic dependence of linear viscoelastic properties on …
Microphase separation in polymeric systems provides a bottom-up strategy to fabricate nanostructures. Polymers that are reported to undergo microphase separation usually include block copolymers or polyelectrolytes. Neutral homopolymers, which are comparatively easy to synthesize, are thought to be incapable of microphase separation. Here, using a minimal model that accounts for ion solvation, we show that microphase separation is possible in neutral homopolymer blends with sufficient dielectric contrast, upon a tiny amount of salt-doping. The driving force for the microphase separation is the…
