Conducting submicron particles are well-suited as filler particles in non-conducting polymer matrices to obtain a conducting composite with a low percolation threshold. Going to nanometer-sized filler particles imposes a restriction to the conductivity of the composite, due to the reduction of the density of states involved in the hopping process between the particles, compared to its value within the crystallites. We show how those microscopic parameters that govern the charge-transport processes across many decades of length scales, can accurately and consistently be determined by a range of dielectric-spectroscopy techniques from a few Hz to infrared frequencies. The method, which is suited for a variety of systems with restricted geometries, is applied to densely packed 7-nm-sized tin-oxide crystalline particles with various degree of antimony doping and the quantitative results unambiguously show the role of the nanocrystal charging energy in limiting the hopping process.
Combining various carbon nanofillers with different dimensions can lead to a synergistic effect through the formation of an efficient conductive network. Hybrid polyurethane (PU) nanocomposites containing multi-walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) were fabricated to study experimental and theoretical aspects of thermal conductivity (TC) enhancement. The optimization of hybrid nanofillers combinations was done to synergically enhance the TC using various types of GNPs, different nanofillers concentrations and varied ratios. A synergistic thermal conductivity improv…
In the present work, the effect of different nanofiller (BaTiO3, CeO2, Er2O3 or TiO2) on blend solid polymer electrolyte comprising of PEO and PVC complexed with bulky LiPF6 have been explored. The XRD analysis confirms the polymer nanocomposite formation. FTIR provides evidence of interaction among the functional groups of the polymer with the ions and the nanofiller in terms of shifting and changing peak profile. The highest ionic conductivity is ~2.3x10-5 S cm-1 with a wide electrochemical stability window of ~3.5 V for 10 wt. % Er2O3. The real and imaginary part of dielectric permittivity …
Low thermal conductivity of polymers, which is one of the considerable drawbacks of commonly used composite structures, has been the focus of many researchers aiming to achieve high-performance polymer-based nanocomposites through the inclusion of highly thermally conductive fillers inside the polymer matrices. Thus, in the present study, a multiscale scheme using non-equilibrium molecular dynamics (NEMD) and finite element (FE) method is developed to explore the impact of different nano-sized fillers (carbon-nitride and graphene) on the effective thermal conductivity of polyethylene-based nan…
Carbon-nanofillers are known for improving the desired properties of polymers. The dispersion quality of nanofillers in the matrix is vital for the fabrication of high-performance nanocomposites. An effective approach for improving dispersion states of multi-walled carbon nanotubes (MWCNT) and graphene nanoplatelets (GNPs) was employed via hybrid inclusion of the nanofillers in polyurethane matrix to further enhancing viscoelastic properties. Nanocomposites based on MWCNTs, two groups of graphene and hybrid MWCNT/graphene with varied weight fractions and ratios were fabricated via a simple, qu…
The free standing solid polymer nanocomposite films has been prepared through standard solution cast technique. The improvement in structural, microstructural and electrochemical properties has been observed on the dispersion of nanofiller in polymer salt complex. X Ray diffraction studies clearly reflect the formation of complex formation as no corresponding salt peak appeared in the diffractograms. The FTIR analysis suggested a clear and convincing evidence of polymer ion, ion ion and polymer ion nanofiller interaction. The highest ionic conductivity of the prepared solid polymer electrolyte…
A free standing transparent film of solid state polymer electrolyte based on PEO/PAN + NaPF6 with different compositions of nano sized TiO2 in weight percent (x = 0, 1, 2, 5, 10, 15, 20 ) is synthesized by using standard solution cast technique. The homogeneous surface of above polymer composition is examined by FESEM. The microscopic interaction among polymer, salt and nanoceramic filler has been analyzed by Fourier Transformed Infra-Red (FTIR) spectroscopy. The reduction of ion pair formation in polymeric separator is clearly observed on addition of nanofiller in the polymer salt complex fil…
Polydimethylsiloxane (PDMS) is an insulator and it is commonly used in fabrication of micro-structures but there is a need of electrical conductive PDMS. Therefore, this research is mainly focused on producing PDMS nanocomposites with high electrical conductivity. Thus, we produced highly conductive PDMS nanocomposites which were filled with multiwalled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs). Due to the synergistic effect between CNTs and GNPs inside a polymeric matrix, we expected to obtain more conductive nanocomposites than PDMS nanocomposite filled with only CNTs. Addi…
Mesoscopic modeling and experimental validation of thermal and mechanical properties of polypropylene nanocomposites reinforced by graphene-based fillers
In this work, the study of thermal conductivity before and after in-situ ring-opening polymerization of cyclic butylene terephthalate into poly (butylene terephthalate) in presence of graphene-related materials (GRM) is addressed, to gain insight in the modification of nanocomposites morphology upon polymerization. Five types of GRM were used: one type of graphite nanoplatelets, two different grades of reduced graphene oxide (rGO) and the same rGO grades after thermal annealing for 1 hour at 1700°C under vacuum to reduce their defectiveness. Polymerization of CBT into pCBT, morphology and nano…
The recent development of nanoscale fillers, such as carbon nanotube, graphene, and nanocellulose, allows the functionality of polymer nanocomposites to be controlled and enhanced. However, conventional synthesis methods of polymer nanocomposites cannot maximise the reinforcement of these nanofillers at high filler content. Approaches to the synthesis of high content filler polymer nanocomposites are suggested to facilitate future applications. The fabrication methods address design of the polymer nanocomposite architecture, which encompass one, two, and three dimensional morphology. Factors t…
Delamination is one of the major concerns for carbon fiber reinforced polymer (CFRP) composites. Improving fracture toughness reduces delamination and allows for the creation of multifunctional CFRP. In this study, polyaniline (PANI) coated graphene nanoplatelets (GNP) are introduced in the interlaminar region of CFRP pre-preg with the aid of environmentally friendly thermoplastic polymer, polyvinylpyrrolidone (PVP). The GNP content is varied as 1, 3, and 5% by weight with respect to PVP. The improvements in the fracture toughness are investigated using a double cantilever beam test. An improv…
In this work, the preparation of nanocomposites based on poly(L-lactide) PLLA and graphite nanoplatelets (GNP) was assessed, by applying, for the first time, the reactive extrusion (REX) polymerization approach, which is considered a low environmental impact method to prepare polymer systems and which allows an easy scalability. In particular, ad hoc synthesized molecules, constituted by a pyrene end group and a poly (D-lactide) (PDLA) chain (Pyr-D), capable of interacting with the surface of GNP layers as well as forming stereoblocks during the ring opening polymerization (ROP) of L-lactide, …
Polymers are widely used in industry and in our daily life because of their diverse functionality, light weight, low cost and excellent chemical stability. However, on some applications such as heat exchangers and electronic packaging, the low thermal conductivity of polymers is one of the major technological barriers. Enhancing the thermal conductivity of polymers is important for these applications and has become a very active research topic over the past two decades. In this review article, we aim to: 1). systematically summarize the molecular level understanding on the thermal transport me…
We report on the investigation of morphology, magnetic and conductive properties of the mutilayered nanostructures [(Co$_{40}$Fe$_{40}$B$_{20}$)$_{34}$(SiO$_2$)$_{66}$]/[C]$_{47}$ consisting of the contacting magnetic (Co$_{40}$Fe$_{40}$B$_{20}$)$_{34}$(SiO$_2$)$_{66}$ nanocomposite and amorphous semiconductor carbon C layers. It is shown by Grazing-Incidence Small-Angle X-ray Scattering method that the ordering and the size of nanoparticles in the magnetic layers do not change profoundly with increasing of carbon layer thickness. Meanwhile, the electrical conductance and the magnetic properti…
In this paper we adopt a processing technology to develop elastomer plus nano-graphite hybrid composites with multifunctional properties. Beyond the improvements of the mechanical properties, the research findings demonstrate the synergistic effect of carbon black and graphite nanoplatelets to prepare rubber composite thermally conductive and to design a new class of shock absorbers. It was found that a critical GNPs/CB ratio was apt to reduce the strong interlayer forces among the GNPs sheets, which led to the efficiency on reinforcement in mechanical properties and improvements of the perfor…
In this work, electrically and thermally conductive poly (butylene terephthalate) nanocomposites were prepared by in-situ ring-opening polymerization of cyclic butylene terephthalate (CBT) in presence of a tin-based catalyst. One type of graphite nanoplatelets (GNP) and two different grades of reduced graphene oxide (rGO) were used. Furthermore, high temperature annealing treatment under vacuum at 1700°C was carried out on both RGO to reduce their defectiveness and study the correlation between the electrical/thermal properties of the nanocomposites and the nanoflakes structure/defectiveness. …
The paper presents a comprehensive analysis of elastic properties of polystyrene-based nanocomposites filled with different types of inclusions: small spherical particles (SiO2 and Al2O3), alumosilicates (montmorillonite, halloysite natural tubules and Mica) and carbon nanofillers (carbon black and multi-walled carbon nanotubes). Composites were fabricated by melt technology. The analysis of composite melts showed that the introduction of Montmorillonite, Multi-walled carbon nanotubes, and Al2O3 particles provided an increase in melt viscosity by an average of 2 to 5 orders of magnitude over t…
Flexible NbC nanocomposite thin films with carbon content ranging from 0 to 99 at.% were deposited at room temperature on Si (100) and polystyrene substrates by non-reactive magnetron sputtering from pure Nb and C targets without applying bias voltage to the substrates. HRTEM images reveal that the films exhibit a nanocomposite structure consisting of NbC nanocrystals (2 to 15 nm in size) embedded in an amorphous carbon matrix. By simply adjusting the Nb flux in the plasma, we can monitor the nanocrystal size and the percent of free-carbon phase in the films, which in turn allows for the tailo…
The present paper report is focused toward the preparation of the flexible and freestanding blend solid polymer electrolyte films based on PEO-PVP complexed with NaPF6 by solution cast technique. The structural/morphological features of the synthesized polymer nanocomposite films have been investigated in detail using X-ray diffraction, Fourier transform infra-red spectroscopy, field emission scanning electron microscope, and atomic force microscopy techniques. The film PEO-PVP+NaPF6 O/Na:8 exhibits highest ionic conductivity ~5.92x10-6 S cm-1 at 40 oC and ~2.46x10-4 S cm-1 at 100 oC. The temp…
We report static and time-resolved terahertz (THz) conductivity measurements of a high- performance thermoelectric material containing tellurium nanowires in a PEDOT:PSS matrix. Composites were made with and without sulfur passivation of the nanowires surfaces. The material with sulfur linkers (TeNW/PD-S) is less conductive but has a longer carrier lifetime than the formulation without (TeNW/PD). We find real conductivities at f = 1THz of σ(TeNW/PD) = 160 S/cm and σ(TeNW/PD-S) = 5.1 S/cm. These values are much larger than the corresponding DC conductivities, suggesting DC conductivity is limit…
In this work, a novel electrospun conductive polymer nanocomposite made of polycaprolactone with an exohedral complex made of multiwalled carbon nanotubes and fullerene C60 was prepared and characterized. The preparation was straightforward and the complexes self-assembled within the nanocomposite fibers. The nanocomposite showed electrical switching behavior due to charge accumulation of fullerene C60 upon electrical stimulation. Write-once read-many memory devices were fabricated by electrospinning a nanocomposite with 0.8%wt. fullerene C60 onto interdigitated coplanar electrodes. The device…
Epoxy nanocomposites able to meet pressing industrial requirements in the field of structural material have been developed and characterized. Tunneling Atomic Force Microscopy (TUNA), which is able to detect ultra-low currents ranging from 80 fA to 120 pA, was used to correlate the local topography with electrical properties of tetraglycidyl methylene dianiline (TGMDA) epoxy nanocomposites at low concentration of carbon nanofibers (CNFs) ranging from 0.05% up to 2% by wt. The results show the unique capability of TUNA technique in identifying conductive pathways in CNF/resins even without modi…
In recent years, the immiscible polymer blend system has attracted much attention as the matrix of nanocomposites. Herein, from the perspective of dynamics, the control of the carbon nanotubes (CNTs) migration aided with the interface of polystyrene (PS) and poly(methyl methacrylate) (PMMA) blends was achieved through a facile melt mixing method. Thus, we revealed a comprehensive relationship between several typical CNTs migrating scenarios and the microwave dielectric properties of their nanocomposites. Based on the unique morphologies and phase domain structures of the immiscible matrix, we …
We demonstrate in this work, that expanded graphite (EG) can lead to a very large enhancement in thermal conductivity of polyetherimide-graphene and epoxy-graphene nanocomposites prepared via solvent casting technique. A k value of 6.56 Wm-1K-1 is achieved for 10 weight % composition sample, representing an enhancement of ~2770% over pristine polyetherimide (k ~ 0.23 Wm-1K-1). This extraordinary enhancement in thermal conductivity is shown to be due to a network of continuous graphene sheets over long length scales, resulting in low thermal contact resistance at bends/turns due to the graphene…
