arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 0711.2254astro-ph
收藏

ANTARES中微子望远镜的校准系统和方法

Calibration systems and methods for the ANTARES neutrino telescope

Felix Fehr

摘要:

目前正在地中海建造ANTARES中微子望远镜。完整的探测器将由12根弦组成,并由一条额外的仪器线补充。目前部署了九根管柱,其中五根已经连接到岸边并正在运行。每根弦都配备了75个光学模块(OM),其中装有光电倍增管,用于检测中微子反应中产生的带电粒子引起的切伦科夫光。为了精确地重建所探测到的中微子的方向,需要精确地测量切伦科夫光子的到达时间以及OM的位置和方向。为此目的,ANTARES探测器配备了几个系统,以便于对探测器进行校准。使用从LED和激光装置发射的光脉冲执行时间校准。定位是通过使用水听器的声学三角测量完成的。此外,模块的局部倾斜角和方向用一组倾斜仪和罗盘测量。在本文中,它表明,ANTARES时间和对准校准系统成功地运行在原位。特别是,它示出的ANTARES读出电子能够达到亚纳秒的时间分辨率。

英文摘要:

The ANTARES neutrino telescope is currently being constructed in the Mediterranean Sea. The complete detector will consist of 12 strings, supplemented by an additional instrumentation line. Nine strings are at present deployed of which five are already connected to the shore and operating. Each string is equipped with 75 Optical Modules (OMs) housing the photomultipliers to detect the Cherenkov light induced by the charged particles produced in neutrino reactions. An accurate measurement of the Cherenkov photon arrival times as well as the positions and orientations of the OMs is required for a precise reconstruction of the direction of the detected neutrinos. For this purpose the ANTARES detector is provided with several system s to facilitate the calibration of the detector. The time calibration is performed using light pulses emitted from LED and laser devices. The positioning is done via acoustic triangulation using hydrophones. Additionally, local tilt angles and the orientations of the modules are measured with a set of tiltmeters and compasses. In this paper, it is demonstrated that the ANTARES time and alignment calibration systems operate successfully in situ. In particular, it is shown that the ANTARES read-out electronics is capable of reaching a sub-nanosecond time resolution.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑