The aim of an invisibility device is to guide light around any object put inside, being able to hide objects from sight. In this work, we propose a novel design of dielectric invisibility media based on negative refraction and optical conformal mapping that seems to create perfect invisibility. This design has some advantages and more relaxed constraints compared with already proposed schemes. In particular, it represents an example where the time delay in a dielectric invisibility device is zero. Furthermore, due to impedance matching of negatively refracting materials, the reflection should be close to zero. These findings strongly indicate that perfect invisibility with optically isotropic materials is possible. Finally, the area of the invisible space is also discussed.
Simultaneous scattering invisibility and free-space field enhancement have been achieved based on multipolar interferences among all-dielectric nanoparticles. The scattering properties of all-dielectric nanowire quadrumers are investigated and two sorts of scattering invisibilities have been identified: the trivial invisibility where the individual nanowires are not effectively excited; and the nontrivial invisibility with strong multipolar excitations within each nanowire, which results in free-space field enhancement outside the particles. It is revealed that such nontrivial invisibility ori…
The study of invisibility of an infinite dielectric rod with high refractive index is based on the two-dimensional Mie scattering problem, and it suggests strong suppression of scattering due to the Fano interference between spectrally broad nonresonant waves and narrow Mie-resonant modes. However, when the dielectric rod has a finite extension, it becomes a resonator supporting the Fabry-Perot modes which introduce additional scattering and eventually destroy the invisibility. Here we reveal that for shorter rods with modest values of the aspect ratio r/L (where r and L are the radius and len…
An invisibility device should guide light around an object as if nothing were there, regardless where the light comes from. Ideal invisibility devices are impossible due to the wave nature of light. This paper develops a general recipe for the design of media that create perfect invisibility within the accuracy of geometrical optics. Here the imperfections of invisibility can be made arbitrarily small to hide objects that are much larger than the wavelength. Using modern metamaterials, practical demonstrations of such devices seem possible. The method developed here can be also applied to esca…
We reveal that an isotropic homogeneous subwavelength particle with a high refractive index can produce ultra-weak total scattering due to vanishing contribution of the electric dipole moment. This effect can be explained with the help of the Fano resonance and scattering efficiency associated with the excitation of an anapole mode. The latter is a nonradiative mode emerging from destructive interference of electric and toroidal dipole moments, and it can be employed for a design of highly transparent optical materials.
We present the design, fabrication and performance test of a quasi three-dimensional carpet cloak made of normal dielectric in the microwave regime. Taking advantage of a simple linear coordinate transformation we design a carpet cloak with homogeneous anisotropic medium and then practically realize the device with multilayer of alternating normal dielectric slabs based on the effective medium theory. As a proof-of-concept example, we fabricate the carpet cloak with multilayer of FR4 dielectric slabs with air spacing. The performance of the fabricated design is verified through full-wave numer…
A cylindrical wave expansion method is developed to obtain the scattering field for an ideal two-dimensional cylindrical invisibility cloak. A near-ideal model of the invisibility cloak is set up to solve the boundary problem at the inner boundary of the cloak shell. We confirm that a cloak with the ideal material parameters is a perfect invisibility cloak by systematically studying the change of the scattering coefficients from the near-ideal case to the ideal one. However, due to the slow convergence of the zero$^{th}$ order scattering coefficients, a tiny perturbation on the cloak would ind…
Subwavelength structures demonstrate many unusual optical properties which can be employed for engineering functional metadevices, as well as scattering of light and invisibility cloaking. Here we demonstrate that the suppression of light scattering for any direction of observation can be achieved for an uniform dielectric object with high refractive index, in a sharp contrast to the cloaking with multilayered plasmonic structures suggested previously. Our finding is based on the novel physics of cascades of Fano resonances observed in the Mie scattering from a homogeneous dielectric rod. We o…
Recent theoretical advances applied to metamaterials have opened new avenues to design a coating that hides objects from electromagnetic radiation and even the sight. Here, we propose a new design of cloaking devices that creates perfect invisibility in isotropic media. A combination of positive and negative refractive indices, called plus-minus construction, is essential to achieve perfect invisibility (i.e., no time delay and total absence of reflection). Contrary to the common understanding that between two isotropic materials having different refractive indices the electromagnetic reflecti…
A near-perfect, non-singular cylindrical invisibility cloak with diamond cross section is achieved by a two-step coordinate transformation. A small line segment is stretched and then blown up into a diamond space, and finally the cloak consisting of four kinds and eight blocks of homogeneous transformation media is obtained. Numerical simulations confirm the well performance of the cloak. The operation bandwidth of the cloak is also investigated. Our scheme is promising to create a simple and well-performed cloak in practice.
In this paper, we establish the full-wave electromagnetic scattering theory to study the electromagnetic scattering from infinitely long cylinders with radially anisotropic coatings. We show that the total effective scattering width can be dramatically reduced by the suitable adjustment of the dielectric anisotropy of the shell, while it is not the case for tuning the dielectric anisotropy of the core. Furthermore, we could make the cylindrical objects invisible when both dielectric and magnetic anisotropies are adjusted. In the long wavelength limit, we develop effective medium theory to deri…
The design rules of transformation optics generally lead to spatially inhomogeneous and anisotropic impedance-matched magneto-dielectric material distributions for, e.g., free-space invisibility cloaks. Recently, simplified anisotropic non-magnetic free-space cloaks made of a locally uniaxial dielectric material (calcite) have been realized experimentally. In a two-dimensional setting and for in-plane polarized light propagating in this plane, the cloaking performance can still be perfect for light rays. However, for general views in three dimensions, various imperfections are expected. In thi…
Dielectric metasurfaces perform unique photonics effects and serve as the engine of nowadays light-matter technologies. Here, we suggest theoretically and demonstrate experimentally the realization of a high transparency effect in a novel type of all-dielectric metasurface, where each constituting meta-atom of the lattice presents the so-called transverse Kerker effect. In contrast to Huygens' metasurfaces, both phase and amplitude of the incoming wave remain unperturbed at the resonant frequency and, consequently, our metasurface totally operates in the invisibility regime. We prove experimen…
The method of coordinate transformation offers a way to realize perfect cloaks, but provides less ability to characterize the performance of a multilayered cloak in practice. Here, we propose an analytical model to predict the performance of a multilayered cylindrical cloak, based on which, the cloak in practice can be optimized to diminish the intrinsic scatterings caused by discretization and simplification. Extremely low scattering or "quasi-perfect invisibility" can be achieved with only a few layers of anisotropic metamaterials without following the transformation method. Meanwhile, the p…
A broad class of planar dielectric media with complex permittivity profiles that are fully invisible, for both left and right incidence sides, is introduced. Such optical media are locally isotropic, non-magnetic and belong to the recently discovered class of Kramers-Kronig media [{\it Nature Photon.} 9, 436 (2015)], i.e. the spatial profiles of the real and imaginary parts of the dielectric permittivity are related each other by a Hilbert transform. The transition from unidirectional to bidirectional invisibility, and the possibility to realize sharp reflection above a cut-off incidence angle…
The key challenge in current research into electromagnetic cloaking is to achieve invisibility over an extended bandwidth. There has been significant progress towards this using the idea of cloaking by sweeping under the carpet of Li and Pendry, with dielectric structures superposed on a mirror. Here, we show that we can harness surface plasmon polaritons at a metal surface structured with a dielectric material to obtain a unique control of their propagation. We exploit this to control plasmonic coupling and demonstrate both theoretically and experimentally cloaking over an unprecedented bandw…
We outline a method for constructing effectively two-dimensional isotropic optical media that are perfectly and omnidirectionally invisible for both TE and TM waves provided that their wavenumber does not exceed a preassigned value $α$. This relies on the observation that a complex scattering potential $v(x,y)$ displays perfect invisibility for wavenumbers $k\leqα$ provided that its Fourier transform with respect to $y$, which we denote by $\tilde v(x,\mathfrak{K}_y)$, vanishes for $\mathfrak{K}_y\leq 2α$. We use this result to construct the permittivity profile for a realistic optical slab th…
Invisibility or cloaking has captured human's imagination for many years. With the recent advancement of metamaterials, several theoretical proposals show cloaking of objects is possible, however, so far there is a lack of an experimental demonstration at optical frequencies. Here, we report the first experimental realization of a dielectric optical cloak. The cloak is designed using quasi-conformal mapping to conceal an object that is placed under a curved reflecting surface which imitates the reflection of a flat surface. Our cloak consists only of isotropic dielectric materials which enable…
Coordinate-transformation approaches to invisibility cloaking rely on the design of an anisotropic, spatially inhomogeneous "transformation medium" capable of suitably re-routing the energy flux around the region to conceal without causing any scattering in the exterior region. It is well known that the inherently magnetic properties of such medium limit the high-frequency scaling of practical "metamaterial" implementations based on subwavelength inclusions (e.g., split-ring resonators). Thus, for the optical range, non-magnetic implementations, based on approximate reductions of the constitut…
By investigating wave properties at cloak boundaries, invisibility cloaks with arbitrary shape constructed by general coordinate transformations are confirmed to be perfectly invisible to the external incident wave. The differences between line transformed cloaks and point transformed cloaks are discussed. The fields in the cloak medium are found analytically to be related to the fields in the original space via coordinate transformation functions. At the exterior boundary of the cloak, it is shown that no reflection is excited even though the permittivity and permeability do not always have a…
We show that it is possible to design an invisible wavelength-sized metal-dielectric metamaterial object without evoking cloaking. Our approach is an extension of the neutral inclusion concept by Zhou and Hu [Phys.Rev.E 74, 026607 (2006)] to Mie scatterers. We demonstrate that an increase of metal fraction in the metamaterial leads to a transition from dielectric-like to metal-like scattering, which proceeds through invisibility or optical neutrality of the scatterer. Formally this is due to cancellation of multiple scattering orders, similarly to plasmonic cloaking introduced by Alu and Enghe…
Highly-anisotropic plasmonic nanotubes exhibit a dramatic drop of the scattering cross section in the transition regime from hyperbolic to elliptic dispersion. The characterization of a realistic multilayered metamaterial is typically carried out by means of an effective medium approach providing average components of the permittivity tensor and wave fields. Here, the edge effects of the metal-dielectric stratified nanotube for different combinations were thoroughly analyzed. We show how the boundary layers, which in principle remain fully irrelevant in the estimation of the effective permitti…
Based on the concept of complementary media, we propose an invisibility cloak operating at a finite frequency that can cloak an object with a pre-specified shape and size within a certain distance outside the shell. The cloak comprises of a dielectric core, and an "anti-object" embedded inside a negative index shell. The cloaked object is not blinded by the cloaking shell since it lies outside the cloak. Full-wave simulations in two dimensions have been performed to verify the cloaking effect.
While practical realizations of optical invisibility have been achieved so far by various ingenious methods, they generally rely on complex materials which prevent the wide implementation of such schemes. Here, we propose an alternative indivisibility procedure to design objects (i.e. self-cloaked structures) that have optical properties identical to the surrounding environment and are, thereby, intrinsically invisible to an external observer as such (without the necessity of an external cloak). The proposed method is based on the uncoupling of the scattered waves from the incident radiation b…
Interference is the cornerstone of Huygens source design for reshaping and controlling scattering patterns. The conventional underpinning principle, such as for the Kerker effect, is the interference of electric and magnetic dipole and quadrupole modes. Here a route to realize transverse Kerker scattering through employing only the interference between the electric dipole and magnetic quadrupole is demonstrated. The proposed approach is numerically validated in an ultra-thin Silicon square nanoplate metasurface, and is further verified by multipole decomposition. The metasurface is shown to be…
As a consequence of the wave nature of light, invisibility devices based on isotropic media cannot be perfect. The principal distortions of invisibility are due to reflections and time delays. Reflections can be made exponentially small for devices that are large in comparison with the wavelength of light. Time delays are unavoidable and will result in wave-front dislocations. This paper considers invisibility devices based on optical conformal mapping. The paper shows that the time delays do not depend on the directions and impact parameters of incident light rays, although the refractive-ind…
Designing invisible objects without the usage of extreme materials is a long-sought goal for photonic applications. Invisibility techniques demonstrated so far typically require high anisotropy, gain and losses, while also not being flexible. Here we propose an invisibility approach to suppress the scattering of waves from/to given directions and for particular frequency ranges, i.e. invisibility on demand. We derive a Born approximation-based generalized Hilbert transform for a specific invisibility arrangement relating the two quadratures of the complex permittivity of an object. The theoret…
In order to reduce the difficulties in the experimental realizations of the cloak but still keep good performance of invisibility, we proposed a perfect cylindrical invisibility cloak with spatially invariant axial material parameters. The advantage of this kind of TE (or TM) cloak is that only rho and phi components of mu (or epsilon) are spatially variant, which makes it possible to realize perfect invisibility with two-dimensional (2D) magnetic (or electric) metamaterials. The effects of perturbations of the parameters on the performance of this cloak are quantitatively analyzed by scatteri…
Transformation optics (TO) has recently become a useful methodology in the design of unusual optical devices, such as novel metamaterial lenses and invisibility cloaks. Very recently Danner et al. [1] have suggested theoretical extension of this approach to birefrigent TO devices, which perform useful and different functions for mutually orthogonal polarization states of light. Theoretical designs which operate as invisibility cloak for one polarization while behaving as a Luneburg lens for another orthogonal polarization have been suggested. Here we report the first experimental realization o…
The prospect of rendering objects invisible has intrigued researchers for centuries. Transformation optics based invisibility cloak design is now bringing this goal from science fictions to reality and has already been demonstrated experimentally in microwave and optical frequencies. However, the majority of the invisibility cloaks reported so far have a spatially varying refractive index which requires complicated design processes. Besides, the size of the hidden object is usually small relative to that of the cloak device. Here we report the experimental realization of a homogenous invisibil…
Transformation optics (TO) is a powerful tool for the design of artiffcial materials with unprecedented optical properties. Here, we propose the approximation of TO structures of arbitrary shape by faceting, in which curved surfaces are approximated by at metamaterial layers that can be implemented by standard fabrication and stacking techniques. We illustrate the approximation approach for the specific example of a cylindrical invisibility cloak. First, we introduce a numerical method for the design of cloaks with arbitrary boundary shapes, and apply it to faceted shapes. Subsequently, we red…
It was proposed that perfect invisibility cloaks can be constructed for hiding objects from electromagnetic illumination (Pendry et al., Science 312, p. 1780). The cylindrical cloaks experimentally demonstrated (Schurig et al., Science 314, p. 997) and proposed (Cai et al., Nat. Photon. 1, p. 224) have however simplified material parameters in order to facilitate easier realization as well as to avoid infinities in optical constants. Here we show that the cylindrical cloaks with simplified material parameters inherently allow the zeroth-order cylindrical wave to pass through the cloak as if th…
Cloaking of Arbitrarily Shaped Large-Scale Objects Through the Injection of Electromagnetic Invisibility Genes
Key Lab of Advanced Transducers and Intelligent Control System, Ministry of Education and Shanxi Province, College of Physics and Optoelectronics, Taiyuan University of Technology（先进换能器与智能控制系统重点实验室（教育部和山西省），物理与光电工程学院，太原理工大学）；The Department of Electronic Systems, Aalborg University（电子系统系，奥尔堡大学）
Permittivity tensors of arbitrary shaped invisibility devices are obtained using effective medium approach in general relativity. As special cases, analytical expressions for the permittivity tensors of invisibility cloaks for the elliptic cylinder, prolate spheroid, and the confocal paraboloid geometry are derived. In the case of elliptic cylinder, we found that the point of infinite light speed in the electromagnetic space becomes two points in the physical space in the zz component of the permittivity tensor. This result is different from the case of perfect cylinder in which there is a lin…
A general concept of perfect nonradiating modes in dielectric nanoparticles of an arbitrary shape is put forward. It is proved that such modes exist in axisymmetric dielectric nanoparticles and have unlimited radiative Q-factors. With smart tuning of the excitation beams, perfect modes appear as deep minima in the scattered radiation spectra (up to complete disappearance), but at the same time, they have a giant amplification of the fields inside the particle. Such modes have no analogs and can be useful for the realization of nanosensors, low threshold nanolasers, and other strong nonlinear e…
The existence of an infinite number of perfect nonradiating modes in elliptical nanofibers is demonstrated. Dispersion laws are found for TM and TE perfect modes in circular and elliptical waveguides with an arbitrary eccentricity. Numerical simulations in Comsol Multiphysics have shown that these modes can be excited by plane waves of a certain parity and have extremely low radiative losses and extremely high quality factors. The found modes can be used to create highly sensitive nanosensors and other optical nanodevices where radiation losses should be minimal.
In the field of transformation optics, metamaterials mimic the effect of coordinate transformations on electromagnetic waves, creating the illusion that the waves are propagating through a virtual space. Transforming space by appropriately designed materials makes devices possible that have been deemed impossible. In particular, transformation optics has led to the demonstration of invisibility cloaking for microwaves, surface plasmons and infrared light. Here we report the achievement of another "impossible task". We implement, for microwaves, a device that would normally require a dielectric…
The promise of perfect imaging in the optical domain, where light can be imaged without aberrations and with ultra-high resolution, could revolutionize technology and nanofabrication [1, 2, 3, 4, 5, 6]. Recently it has been shown theoretically that perfect imaging can be achieved in a dielectric medium with spatially varying refractive index [7, 8]. The lens geometry is defined using transformation optics [9, 10, 11, 12, 13, 14, 15] for projecting a spherical space onto a real plane space, forming Maxwells fish eye [16, 17, 18, 19]. Most transformation optics demonstrations have been achieved …
Conformal invisibility devices are only supposed to work within the validity range of geometrical optics. Here we show by numerical simulations and analytical arguments that for certain quantized frequencies they are nearly perfect even in a regime that clearly violates geometrical optics. The quantization condition follows from the analogy between the Helmholtz equation and the stationary Schrodinger equation.
Exerting well-defined control over the reflection $(R)$, absorption $(A)$, and transmission $(T)$ of electromagnetic waves is a key objective in quantum optics. To this end, one often utilizes hybrid structures comprised of elements with different optical properties in order to achieve features such as high $R$ or high $A$ for incident light. A desirable goal would be the possibility to tune between all three regimes of nearly perfect reflection, absorption, and transmission within the same device, thus swapping between the cases $R\to 1$, $A\to1$, and $T\to1$ dynamically. We here show that a …
There is currently a great deal of interest in the theoretical and practical possibility of cloaking objects from the observation by electromagnetic waves. The basic idea of these invisibility devices \cite{glu1, glu2, le},\cite{pss1} is to use anisotropic {\it transformation media} whose permittivity and permeability $\var^{λν}, μ^{λν}$, are obtained from the ones, $\var_0^{λν}, μ^{λν}_0$, of isotropic media, by singular transformations of coordinates. In this paper we study electromagnetic cloaking in the time-domain using the formalism of time-dependent scattering theory. This formalism all…
Black phosphorus (BP) as a promising two-dimensional material with extraordinary optical properties constitutes an excellent building block in multilayer hyperbolic metamaterials. In this work, we design a multilayer structure composed of BP/dielectric layer stacking unit cells patterned on a gold mirror and theoretically demonstrate the tunable anisotropic absorption in the infrared regime. The electric dipole resonance between the adjacent unit cells drives the structure in the critical coupling state, and impedance of the structure matches to that of free space, showing the perfect absorpti…
In electrical engineering metamaterials have been developed that offer unprecedented control over electromagnetic fields. Here we show that general relativity lends the theoretical tools for designing devices made of such versatile materials. Given a desired device function, the theory describes the electromagnetic properties that turn this function into fact. We consider media that facilitate space-time transformations and include negative refraction. Our theory unifies the concepts operating behind the scenes of perfect invisibility devices, perfect lenses, the optical Aharonov-Bohm effect a…
Non-Euclidean geometry combined with transformation optics has recently led to the proposal of an invisibility cloak that avoids optical singularities and therefore can work, in principle, in a broad band of the spectrum [U. Leonhardt and T. Tyc, Science 323, 110 (2009)]. Such a cloak is perfect in the limit of geometrical optics, but not in wave optics. Here we analyze, both analytically and numerically, full wave propagation in non-Euclidean cloaking. We show that the cloaking device performs remarkably well even in a regime beyond geometrical optics where the device is comparable in size wi…
We numerically and experimentally investigate graphene-based optical absorbers that exploit guided mode resonances (GMRs) achieving perfect absorption over a bandwidth of few nanometers (over the visible and near-infrared ranges) with a 40-fold increase of the monolayer graphene absorption. We analyze the influence of the geometrical parameters on the absorption rate and the angular response for oblique incidence. Finally, we experimentally verify the theoretical predictions in a one-dimensional, dielectric grating and placing it near either a metallic or a dielectric mirror.
A metamaterial perfect absorber consisting of a tri-layer (Al/ZnS/Al) metal-dielectric-metal system with top aluminium nano-disks is fabricated by laser-interference lithography and lift-off processing. The metamaterial absorber had peak resonant absorbance at 1090 nm and showed nonlinear absorption for 600ps laser pulses at 1064 nm wavelength. A nonlinear saturation of reflectance was measured to be dependent on the average laser power incident and not the peak laser intensity. The nonlinear behaviour is shown to arise from the heating due to the absorbed radiation and photo-thermal changes i…
Two methods are explained to exactly solve Maxwell's equations where permittivity, permeability and conductivity may vary in space. In the constitutive relations, retardation is regarded. If the material properties depend but on one coordinate, general solutions are derived. If the properties depend on two coordinates, geometrically restricted solutions are obtained. Applications to graded reflectors, especially to dielectric mirrors, to filters, polarizers and to waveguides, plain and cylindrical, are indicated. New foundations for the design of optical instruments, which are centered around …
We propose an birefringence route to perfect electromagnetic (EM) wave tunneling through a metallic film which relies on homogeneous birefringent coatings with moderate and positive parameters only. EM transparency is achieved in such an birefringent-metal-birefringent (BMB) structure for both polarizations and over nearly all incident angles. The stringent restrictions in conventional dielectric-metal-dielectric media, i.e., dielectrics with extremely negative permittivity, high magnetic field and polarization dependence (only for TE waves), are not required in our method. The criterion for p…
In this paper the design for an absorbing metamaterial with near unity absorbance in terahertz region is presented. The absorber's unit cell structure consists of two metamaterial resonators that couple to electric and magnetic fields separately. The structure allows us to maximize absorption by varying dielectric material and thickness and, hence the effective electrical permittivity and magnetic permeability.
We propose a design for an universal absorber, characterized by a resonance frequency that can be tuned from visible to microwave frequencies independently of the choice of the metal and the dielectrics involved. An almost resonant perfect absorption up to 99.8 % is demonstrated at resonance for all polarization states of light and for a very wide angular aperture. These properties originate from a magnetic Fabry-Perot mode that is confined in a dielectric spacer of $λ/100$ thickness by a metamaterial layer and a mirror. An extraordinary large funneling through nano-slits explains how light ca…
By a hybrid integration of plasmonic and dielectric waveguide concepts, it is shown that coherent perfect absorption can be achieved in a co-propagant coupler geometry. The device holds promises for classical and quantum signal processing. First, the operating principle of the proposed device is detailed in the context of a more general 2x2 lossy coupler formalism. Then, it is shown how to tune the device in a wide region of possible working points, its broadband operation, and the tolerance to fabrication uncertainties. Finally, a complete picture of the electromagnetic modes inside the hybri…
We show that dielectric or even perfectly conducting cylinders can be cloaked by a uniform or a layered dielectric cladding, without the need of any exotic or magnetic material parameters. In particular, we start by presenting a simple analytical concept that can accurately describe the cloaking effect obtained with conical silver plates in the visible spectrum. The modeled structure has been originally presented in [S. A. Tretyakov, P. Alitalo, O. Luukkonen, C. R. Simovski, Phys. Rev. Lett., vol. 103, p. 103905, 2009], where its operation as a cloak in the optical frequencies was studied only…
In this manuscript, we demonstrate the design and experimental proof of an optical cloaking structure which multi-directionally conceals a perfectly electric conductor (PEC) object from an incident plane wave. The dielectric modulation around the highly reflective scattering PEC object is determined by an optimization process for multi-directional cloaking purposes. And to obtain the multi-directional effect of the cloaking structure, an optimized slice is mirror symmetrized through a radial perimeter. Three-dimensional (3D) finite-difference time-domain method is integrated with genetic optim…
Negative refraction is known to occur in materials that simultaneously possess a negative electric permittivity and magnetic permeability; hence they are termed negative index materials. However, there are no known natural materials that exhibit a negative index of refraction. In large part, interest in these materials is due to speculation that they could be used as perfect lenses with superresolution. We propose a new way of achieving negative refraction with currently available technology, based on transparent, metallo-dielectric multilayer structures. The advantage of these structures is t…
Using some special properties of a permeability-near-zero material, the radiation of a line current is greatly enhanced by choosing appropriately the dimension of a dielectric domain in which the source lies and that of a permeability-near-zero shell. The radiation of the source can also be completely suppressed by adding appropriately another dielectric domain or an arbitrary perfect electric conductor (PEC) inside the shell. Enhanced directive radiation is also demonstrated by adding a PEC substrate.
