Many proposals for quantum information processing require precise control over the motion of neutral atoms, as in the manipulation of coherent matter waves or the confinement and localization of individual atoms. Patterns of micron-sized wires, fabricated lithographically on a flat substrate, can conveniently produce large magnetic-field gradients and curvatures to trap cold atoms and to facilitate the production of Bose-Einstein condensates. This paper describes tools and techniques for the construction of such devices.
We report heating rate measurements in a microfabricated gold-on-sapphire surface electrode ion trap with trapping height of approximately 240 micron. Using the Doppler recooling method, we characterize the trap heating rates over an extended region of the trap. The noise spectral density of the trap falls in the range of noise spectra reported in ion traps at room temperature. We find that during the first months of operation the heating rates increase by approximately one order of magnitude. The increase in heating rates is largest in the ion loading region of the trap, providing a strong hi…
The majority of microfabricated ion traps in use for quantum information processing are of the 2D 'surface-electrode' type or of the 3D 'wafer' type. Surface-electrode traps greatly simplify fabrication and hold the promise of allowing trapped-ion quantum computers to scale via standard semiconductor industry fabrication techniques. However, their geometry constrains them to having much lower trapping efficiency, depth, and harmonicity compared to 3D geometries. Conversely 3D geometries offer superior trap performance but fabrication is more complex, limiting potential to scale. We describe ne…
We present the design, fabrication, and experimental implementation of surface ion traps with Y-shaped junctions. The traps are designed to minimize the pseudopotential variations in the junction region at the symmetric intersection of three linear segments. We experimentally demonstrate robust linear and junction shuttling with greater than one million round-trip shuttles without ion loss. By minimizing the direct line of sight between trapped ions and dielectric surfaces, negligible day-to-day and trap-to-trap variations are observed. In addition to high-fidelity single-ion shuttling, multip…
We describe the use of laser-enhanced etching of fused silica in order to build multi-layer ion traps. This technique offers high precision of both machining and alignment of adjacent wafers. As examples of designs taking advantage of this possibility, we describe traps for realizing two key elements of scaling trapped ion systems. The first is a trap for a cavity-QED interface between single ions and photons, in which the fabrication allows shapes that provide good electro-static shielding of the ion from charge build-up on the mirror surfaces. The second incorporates two X-junctions allowing…
We describe a versatile planar Penning trap structure, which allows to dynamically modify the trapping conguration almost arbitrarily. The trap consists of 37 hexagonal electrodes, each with a circumcirle-diameter of 300 m, fabricated in a gold-on-sapphire lithographic technique. Every hexagon can be addressed individually, thus shaping the electric potential. The fabrication of such a device with clean room methods is demonstrated. We illustrate the variability of the device by a detailed numerical simulation of a lateral and a vertical transport and we simulate trapping in racetrack and arti…
We describe the implementation of a three-dimensional Paul ion trap fabricated from a stack of precision-machined silica glass wafers, which incorporates a pair of junctions for 2-dimensional ion transport. The trap has 142 dedicated electrodes which can be used to define multiple potential wells in which strings of ions can be held. By supplying time-varying potentials, this also allows for transport and re-configuration of ion strings. We describe the design, simulation, fabrication and packaging of the trap, including explorations of different parameter regimes and possible optimizations an…
The prospect of building a quantum information processor underlies many recent advances ion trap fabrication techniques. Potentially, a quantum computer could be constructed from a large array of interconnected ion traps. We report on a micrometer-scale ion trap, fabricated from bulk silicon using micro-electromechanical systems (MEMS) techniques. The trap geometry is relatively simple in that the electrodes lie in a single plane beneath the ions. In such a trap we confine laser-cooled 24Mg+ ions approximately 40 microns above the surface. The fabrication technique and planar electrode geometr…
Ion traps offer the opportunity to study fundamental quantum systems with high level of accuracy highly decoupled from the environment. Individual atomic ions can be controlled and manipulated with electric fields, cooled to the ground state of motion with laser cooling and coherently manipulated using optical and microwave radiation. Microfabricated ion traps hold the advantage of allowing for smaller trap dimensions and better scalability towards large ion trap arrays also making them a vital ingredient for next generation quantum technologies. Here we provide an introduction into the princi…
Despite the progress in building sophisticated microfabricated ion traps, Paul traps employing needle electrodes retain their significance due to the simplicity of fabrication while producing high-quality systems suitable for quantum information processing, atomic clocks etc. For low noise operations such as minimizing `excess micromotion', needles should be geometrically straight and aligned precisely with respect to each other. Self-terminated electrochemical etching, previously employed for fabricating ion trap needle electrodes employs a sensitive and time-consuming technique resulting in …
Ultracold atom-traps on a chip enhances the practical application of atom traps in quantum information processing, sensing, and metrology. Plasmon mediated near-field optical potentials are promising for trapping atoms. The combination of plasmonic nanostructures and ultracold atoms has the potential to create a two dimensional array of neutral atoms with lattice spacing smaller than that of lattices created from interfering light fields -- the optical lattices. We report the design, fabrication and characterization of a nano-scale array of near-field optical traps for neutral atoms using plas…
We present an ion-lattice quantum processor based on a two-dimensional arrangement of linear surface traps. Our design features a tunable coupling between ions in adjacent lattice sites and a configurable ion-lattice connectivity, allowing one, e.g., to realize rectangular and triangular lattices with the same trap chip. We present detailed trap simulations of a simplest-instance ion array with $2\times9$ trapping sites and report on the fabrication of a prototype device in an industrial facility. The design and the employed fabrication processes are scalable to larger array sizes. We demonstr…
We report on the design, fabrication, and preliminary testing of a 150 zone array built in a `surface-electrode' geometry microfabricated on a single substrate. We demonstrate transport of atomic ions between legs of a `Y'-type junction and measure the in-situ heating rates for the ions. The trap design demonstrates use of a basic component design library that can be quickly assembled to form structures optimized for a particular experiment.
A quantum network which consists of several components should ideally work on a single physical platform. Neutral alkali atoms have the potential to be very well suited for this purpose due to their electronic structure which involves long lived nuclear spins and very sensitive highly excited Rydberg states. In this paper we describe a fabrication method based on quartz glass to structure arbitrary shapes of microscopic vapor cells. We show that the usual spectroscopic properties known from macroscopic vapor cells are almost unaffected by the strong confinement.
We describe a micro-fabrication method to create concave features with ultra-low surface roughness in silica, either on the end facets of optical fibers or on flat substrates. The machining uses a single focused CO2 laser pulse. Parameters are chosen such that material is removed by thermal evaporation while simultaneously producing excellent surface quality by surface tension-induced movement in a low-viscosity melt layer. A surface roughness σ~0.2nm is regularly obtained. The concave depressions are near-spherical close to the center with radii of curvature between 20 and 2000μm. The method …
We present a novel ion trap fabrication method enabling the realization of multilayer ion traps scalable to an in principle arbitrary number of metal-dielectric levels. We benchmark our method by fabricating a multilayer ion trap with integrated three-dimensional microwave circuitry. We demonstrate ion trapping and microwave control of the hyperfine states of a laser cooled $\,^{9}$Be$^{+}$ ion held at a distance of 35$\,μ$m above the trap surface. This method can be used to implement large-scale ion trap arrays for scalable quantum information processing and quantum simulation.
We fabricate a miniature spherical mirror for tightly focusing an optical dipole trap for neutral atoms. The mirror formation process is modelled to predict the dimensions for particular fabrication parameters. We integrate the spherical mirror with a neutral atom experiment to trap and detect a single atom with high efficiency. The mirror serves the dual purpose of focusing the dipole trap as well as collection of the atomic fluorescence into an optical fibre.
A monolithic segmented 3D ion trap fabricated from fused silica by selective laser-induced etching
ETH Zürich–PSI Quantum Computing Hub（苏黎世联邦理工学院-保罗谢勒研究所量子计算中心）；Institute for Quantum Electronics, ETH Zürich（苏黎世联邦理工学院量子电子学研究所）；Department of Physics, University of Trieste（的里雅斯特大学物理系）；Oxford Ionics（牛津离子体公司）；NVIDIA（英伟达）；Nanophotonic Systems Laboratory, Department of Mechanical and Process Engineering, ETH Zurich（苏黎世联邦理工学院机械与工艺工程纳米光子学系统实验室）
We report a process for fabricating high quality, defect-free spherical mirror templates suitable for developing high finesse optical Fabry-Perot resonators. The process utilizes the controlled reflow of borosilicate glass and differential pressure to produce mirrors with 0.3 nanometer surface roughness. The dimensions of the mirrors are in the 0.5-5mm range making them suitable candidates for integration with on-chip neutral atom and ion experiments where enhanced interaction between atoms and photons are required. Moreover the mirror curvature, dimension and placement is readily controlled a…
Trapped ions offer long internal state (spin) coherence times and strong inter-particle interactions mediated by the Coulomb force. This makes them interesting candidates for quantum simulation of coupled lattices. To this end it is desirable to be able to trap ions in arbitrary conformations with precisely controlled local potentials. We provide a general method for optimizing periodic planar radio-frequency electrodes for generating ion trapping potentials with specified trap locations and curvatures above the electrode plane. A linear-programming algorithm guarantees globally optimal electr…
We report on the design, fabrication, and implementation of ultrasensitive micromechanical oscillators. Our ultrathin single-crystal silicon cantilevers with integrated magnetic structures are the first of their kind: They are fabricated using a novel high-yield process in which magnetic film patterning and deposition are combined with cantilever fabrication. These novel devices have been developed for use as cantilever magnetometers and as force sensors in nuclear magnetic resonance force microscopy (MRFM). These two applications have achieved nanometer-scale resolution using the cantilevers …
