R. B. Palmer
Parameters are given of machines with center-of-mass (CoM) energies of 3 TeV and 400 GeV but, besides a comment on neutrino radiation, the paper concentrates on progress on the design of a machine to operate at a light Higgs mass, assumed, for this study, to be 100 GeV (CoM).
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
Both Muon Colliders and Neutrino Factories require a muon source capable of producing and capturing O(10^21) muons/year. This paper reviews the similarities and differences between Neutrino Factory and Muon Collider accelerator complexes, the ongoing R&D needed for a Muon Collider that goes beyond Neutrino Factory R&D, and some thoughts about how a Neutrino Factory on the CERN site might eventually be upgraded to a Muon Collider.
The case for a future high-energy collider based on muon beams is briefly reviewed.
Muon Colliders have unique technical and physics advantages and disadvantages when compared with both hadrons and electron machines. They should be regarded as complementary. Parameters are given of a 4 TeV high luminosity muon-muon collider, and of a 0.5 TeV demonstration machine. We discuss the various systems in such muon collider.
Parameters are given of 4 TeV and 0.5 TeV (c-of-m) high luminosity muon-muon Colliders. We discuss the various systems, starting from the proton accelerator needed to generate the muons and proceeding through muon cooling, acceleartion and storage in a collider ring. Detector background, polarization are analyzed. We also look at other type of colliders (hadron, lepton and photon-photon) for comparison. Technical problems in obtaining increased energy in each type of machine are presented. Their relative size and probable relative costs are discussed.
The deleterious effects of the background and radiation environment produced by the decaying muon beam are studied in the Muon Collider Interaction Region, detector and Machine-Detector Interface designs.
Over the last decade there has been significant progress in developing the concepts and technologies needed to produce, capture and accelerate O(1021) muons/year. This development prepares the way for a new type of neutrino source (Neutrino Factory) and a new type of very high energy lepton-antilepton collider (Muon Collider). This article reviews the motivation, design and R&D for Neutrino Factories and Muon Colliders.
We discuss the technical feasibility, key machine parameters and major challenges of a 14 TeV c.m.e. muon-muon collider in the LHC tunnel. The luminosity of the collider is evaluated for three alternative muon sources - the PS synchrotron, one of a type developed by the US Muon Accelerator Program (MAP) and a low-emittance option based on resonant muon pair production. Project affordability is also discussed.
Because muons connect directly to a standard-model Higgs particle in s-channel production, a muon collider would be an ideal device for precision measurement of the mass and width of a Higgs-like particle, and for further exploration of its production and decay properties. Parameters of a high-precision muon collider are presented and the necessary components and performance are described. An important advantage of the muon collider approach is that the spin precession of the muons will enable energy measurements at extremely high accuracy (dE/E to 10-6 or better). The collider could be a firs…
High brilliance muon beams are needed for future facilities such as a Neutrino Factory, an Higgs-factory or a multi-TeV Muon Collider. The R&D path involves many aspects, of which cooling of the incoming muon beams is essential.
New self-consistent parameter sets are presented and discussed for muon collider rings at center-of-mass energies of 10, 30 and 100 TeV. All three parameter sets attain luminosities of 3 x 10^35 /cm^2/s. The parameter sets benefit from new insights gained at the HEMC'99 workshop that considered the feasibility of many-TeV muon colliders.
We describe the physics opportunities and technical challenges of a muon collider as a tool for exploring high energy physics phenomena.
A possible alternative way of producing muons (or other unstable particles) for colliders is proposed. It consists in colliding beams in a "chasing beam" configuration, i.e. collisions of two beams having the same direction but with different energies. This would produce muons with a good collimation, having already a high energy from the beginning, and then a longer life.
Some of the potential capabilities and design challenges of muon colliders are illustrated using self-consistent collider parameter sets at center of mass energies ranging from 0.1 TeV to 100 TeV.
2020 Physics Critique: Can a muon collider be operational within the next 30 years?
本文是伯明翰大学的物理硕士评述报告，分析了μ子对撞机的物理潜力与技术可行性，提出3 TeV μ子对撞机的建造路线图，论证其30年内投入运行具备实验可能性。
A conceptual design is presented for a high power pion production target for muon colliders and neutrino factories that is based around a rotating metal band.
Parameter lists are presented for speculative muon colliders at center-of-mass energies of 10 TeV and 100 TeV. The technological advances required to achieve the given parameters are itemized and discussed, and a discussion is given of the design goals and constraints. An important constraint for multi-TeV muon colliders is the need to minimize neutrino radiation from the collider ring.
Muon Colliders would usher in a new era of scientific investigation in the field of high energy particle physics. The cooling of muon beams is proving to be the greatest obstacle in the realization of a Muon Collider. Monte Carlo simulations of a muon cooling scheme based on Frictional Cooling were performed. Critical issues, which require further study, relating to the technical feasibility of such a scheme are identified. Frictional Cooling, as outlined in this paper, provides sufficient six-dimensional emittance to make luminous collisions possible. It holds exciting potential in solving th…
This paper reviews the Initial Configuration Document for Fermilab's Project X and considers its possible upgrades for neutrino factory or muon collider.
We discuss the design of the muon capture front end for a μ+-μ- Collider. In the front end, a proton bunch on a target creates secondary pions that drift into a capture transport channel, decaying into muons. A sequence of rf cavities forms the resulting muon beams into strings of bunches of differing energies, aligns the bunches to (nearly) equal central energies, and initiates ionization cooling. The muons are then cooled and accelerated to high energy into a storage ring for high-energy high luminosity collisions. Our initial design is based on the somewhat similar front end of the Internat…
A Muon Collider poses a number of challenging problems in the lattice design - low beta-star, small circumference, large physical and dynamic aperture - which must be solved in order to realize the unique opportunities it offers for the high-energy physics. This contribution presents basic solutions which make it possible to achieve the goals for both the energy frontier collider and the Higgs factory with Nb3Sn magnet parameters.
Design of a muon collider interaction region (IR) presents a number of challenges arising from low β* < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting magnets and collider detectors from muon decay products. As a consequence, the designs of the IR optics, magnets and machine-detector interface are strongly interlaced and iterative. A consistent solution for the 1.5 TeV c.o.m. muon collider IR is presented. It can provide an average luminosity of 1034 cm-2s-1 with an adequate protection of magnet and detector co…
Design of a muon collider interaction region (IR) presents a number of challenges arising from low β * < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting magnets and collider detectors from muon decay products. As a consequence, the designs of the IR optics, magnets and machine-detector interface are strongly interlaced and iterative. A consistent solution for the 1.5 TeV c.o.m. muon collider IR is presented. It can provide an average luminosity of 1034 cm-2s-1 with an adequate protection of magnet and detector c…
A focal point for the HEMC'99 workshop was the evaluation of straw-man parameter sets for the acceleration and collider rings of muon colliders at center of mass energies of 10 TeV and 100 TeV. These self-consistent parameter sets are presented and discussed. The methods and assumptions used in their generation are described and motivations are given for the specific choices of parameter values. The assessment of the parameter sets during the workshop is then reviewed and the implications for the feasibility of many-TeV muon colliders are evaluated. Finally, a preview is given of plans for ite…
A complete scheme for production and cooling a muon beam for three specified muon colliders is presented. Parameters for these muon colliders are given. The scheme starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Emittance exchange cooling in slow helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains into single bunches, one of each sign. Further cooling in all dimensions is applied to the single bunches in further slow helical lattices. Final transverse cooling to the required parameters is achiev…
Muon Collider (MC) - proposed by G. I. Budker and A. N. Skrinsky a few decades ago - is now considered as the most exciting option for the energy frontier machine in the post-LHC era. A national Muon Accelerator Program (MAP) is being formed in the USA with the ultimate goal of building a MC at the Fermilab site with c.o.m. energy in the range 1.5-3 TeV and luminosity of ~1-5 \times 10^{34} cm^{-2}s^{-1}1. As the first step on the way to MC it envisages construction of a Neutrino Factory (NF) for high-precision neutrino experiments. The baseline scheme of the NF-MC complex is presented and pos…
The status of the research on muon colliders is discussed and plans are outlined for future theoretical and experimental studies. Besides continued work on the parameters of a 3-4 and 0.5 TeV center-of-mass (CoM) energy collider, many studies are now concentrating on a machine near 0.1 TeV (CoM) that could be a factory for the s-channel production of Higgs particles. We discuss the research on the various components in such muon colliders, starting from the proton accelerator needed to generate pions from a heavy-Z target and proceeding through the phase rotation and decay ($π\to μν_μ$) channe…
Over the last decade there has been significant progress in developing the concepts and technologies needed to produce, capture, accelerate and collide high intensity beams of muons. At present, a high-luminosity multi-TeV muon collider presents a viable option for the next generation lepton-lepton collider, which is believed to be needed to fully explore high energy physics in the era following the LHC discoveries. This article briefly reviews the status of the accelerator R&D, addresses the question of the feasibility of a Muon Collider, what needs to be done to prove it and presents project…
In this paper the possibility of obtaining polarized beams in a high energy muon collider is discusssed
Muon-based accelerators have the potential to enable facilities at both the Intensity and the Energy Frontiers. Muon storage rings can serve as high precision neutrino sources, and a muon collider is an ideal technology for a TeV or multi-TeV collider. Progress in muon accelerator designs has advanced steadily in recent years. In regard to 6D muon cooling, detailed and realistic designs now exist that provide more than 5 order-of-magnitude emittance reduction. Furthermore, detector performance studies indicate that with suitable pixelation and timing resolution, backgrounds in the collider det…
This paper presents a first overview on how to obtain and maintain polarized beams in a muon-collider
Muon Colliders have unique technical and physics advantages and disadvantages when compared with both hadron and electron machines. They should thus be regarded as complementary. Parameters are given of 4 TeV and 0.5 TeV high luminosity \mumu colliders, and of a 0.5 TeV lower luminosity demonstration machine. We discuss the various systems in such muon colliders, starting from the proton accelerator needed to generate the muons and proceeding through muon cooling, acceleration and storage in a collider ring. Problems of detector background are also discussed.
Muon colliders and neutrino factories are attractive options for future facilities aimed at achieving the highest lepton-antilepton collision energies and precision measurements of parameters of the Higgs boson and the neutrino mixing matrix. The performance and cost of these depend on how well a beam of muons can be cooled. Recent progress in muon cooling design studies and prototype tests nourishes the hope that such facilities can be built during the coming decade. The status of the key technologies and their various demonstration experiments is summarized.
It is well known that at linear e^+e^-(e^-e^-) colliders using laser backscattering one can obtain colliding gamma-gamma, gamma-electron beams with energy and luminosity comparable to those in e^+e^- collisions. In this paper, it is explained why this can not be done at high energy muon colliders. Due to several physics reasons the gamma-gamma luminosity is suppressed here by a factor of 10^{14} ! Another option -- gamma's from a linear collider and muons from a muon collider -- is also discussed (and has no sense either). Of course, one can study gamma^*-muon and gamma^*-gamma^* interactions …
It is shown that at muon colliders with the energy in the region of 100 TeV the process of coherent pair creation by the muon in the field of the opposing beam becomes important and imposes some limitations on collider parameters.
We discuss the various beam dynamics problems in muon collider systems, starting from the proton accelerator needed to generate the muon beams and proceeding through the muon storage ring.
We discuss a preliminary design for a high luminosity 4 TeV center of mass $μ^+\,μ^-$ collider ring.
After summarizing the important commonalities between neutrino factories and muon colliders, the key differences are discussed. These include a much larger needed cooling factor (~10^6 in six-dimensional emittance), a smaller number of muon bunches (perhaps only one of each charge), and acceleration to much higher energy, implying significantly different technical choices for some of the cooling and acceleration subsystems. The final storage rings are also quite different. Nevertheless, a neutrino factory could serve as a key stepping stone on the path to a muon collider.
BACKGAMMON: A Scheme for Producing High Intensity Muon Beams for Future Colliders and Other Applications
提出利用核子背散射γ射线（BACKGAMMON）方案产生高强度μ子束，可应用于未来μ子对撞机，并探讨了在EIC上的实施。
It is shown that at a 100 TeV muon collider the synchrotron radiation in the ring will determine the minimum horizontal emittance.
Muon colliders and neutrino factories are attractive options for future facilities aimed at achieving the highest lepton-antilepton collision energies and precision measurements of Higgs boson and neutrino mixing matrix parameters. The facility performance and cost depend on how well a beam of muons can be cooled. Recent progress in muon cooling design studies and prototype tests nourishes the hope that such facilities could be built starting in the coming decade. The status of the key technologies and their various demonstration experiments is summarized. Prospects "post-P5" are also discusse…
FLUKA-Based Optimization of Muon Production Target Design for a Muon Collider Demonstrator
本文基于FLUKA研究了μ子生产靶设计优化，探讨了靶几何和材料对粒子产量及耐久性的影响。
Construction of future Muon Collider (or dedicated mu-ring) tangential to the energy frontier pp colliders will give opportunity to realize mu-p collisions at multi-TeV center of mass energies at a luminosity of order of $10^{33}$ cm$^{-2}$s$^{-1}$ ($10^{34}$ cm$^{-2}$s$^{-1}$). Obviously, such colliders will essentially enlarge the physics search potential of corresponding muon and hadron colliders for both the SM (especially for clarifying QCD basics) and BSM phenomena. This paper is devoted to review of main parameters of mu-p colliders proposed until now.
Muon colliders and neutrino factories are attractive options for future facilities aimed at achieving the highest lepton-antilepton collision energies and precision measurements of parameters of the Higgs boson and the neutrino mixing matrix. The performance and cost of these depend on how well a beam of muons can be cooled. Recent progress in muon cooling design studies and prototype tests nourishes the hope that such facilities can be built starting in the coming decade. The status of the key technologies and their various demonstration experiments is summarized, with emphasis on recent resu…
Renewed international interest in muon colliders motivates the continued investigation of the impacts of beam-induced background on detector performance. This continues the effort initiated by the Muon Accelerator Program and carried out until 2017. The beam-induced background from muon decays directly impacts detector performance and must be mitigated by optimizing the overall machine design, with particular attention paid to the machine detector interface region. In order to produce beam-induced background events and to study their characteristics in coordination with the collider optimizati…
The present scenario for a high luminosity 4 TeV on center of mass muon collider requires a beta function =3 mm at the interaction point. We discuss a test model of a basic layout which satisfies the requirements although it is not fully realistic.
Construction of future Muon Collider (or dedicated mu-ring) tangential to nucleus colliders will give opportunity to realize mu-A collisions at multi-TeV center of mass energies at a luminosity of order of 10^29-10^30 cm^-2s^-1. Obviously, such colliders will essentially enlighten fundamentals of strong interactions from quark to nucleus levels as well as clarify QCD basics. This paper is devoted to estimation of main parameters of the FCC, SppC, HL-LHC, HE-LHC and RHIC based muon-nucleus collider proposals by the software AloHEP.
With the recent hints of the Higgs boson from the LHC and a mass near 125 GeV/c we re-propose to study and build a muon collider Higgs factory to study the Higgs in the S channel [1]. This was first proposed in 1992 by the first author. It is essential to study the Higgs boson for clues to new physics. The formation of the DOE MAP program, recent advances in 6D μ cooling methods, simulation, and targeting make this a feasible project to initiate at this time. This collider would fit into the FNAL site.
The Tevatron proton-antiproton collider at Fermilab continues operation as the world's highest energy particle accelerator by delivering luminosity at a center-of-mass energy of 1.96 TeV. We review recent performance and plans for the remainder of Run 2.
A muon collider would be a powerful tool for exploring the energy-frontier with leptons, and would complement the studies now under way at the LHC. Such a device would offer several important benefits. Muons, like electrons, are point particles so the full center-of-mass energy is available for particle production. Moreover, on account of their higher mass, muons give rise to very little synchrotron radiation and produce very little beamstrahlung. The first feature permits the use of a circular collider that can make efficient use of the expensive rf system and whose footprint is compatible wi…
Particle colliders have arguably been the most important instruments for particle physics over the past 50 years. As they became more powerful, they were used to push the frontier of our knowledge into previously uncharted territory. The LHC, the highest energy collider to date, at which the Higgs boson was discovered, is a prime example. To continue along the road into the Terra Promissa beyond the Standard Model requires colliders with energy reach even greater than that of the LHC. Beams of muons offer enormous potential for the exploration of the energy frontier. Since the muon is a fundam…
A lepton collider in the multi-TeV range has the potential to measure the trilinear Higgs self-coupling constant $λ_{hhh}$ via the W-fusion mode $\ell^+\ell^- \rightarrow ν_\ell \barν_\ell h h$. In this paper we do a generator-level study to explore how center-of-mass energy spread, cone size, tracking resolution, and collision energy range affect how precisely a muon collider can measure $λ_{hhh}$ in comparison to an $e^+e^-$ collider. The smaller spread in center-of-mass energy and higher energy range of a muon collider improve cross section while the larger cone required to reduce beam-indu…
Muon colliders have a great potential for high-energy physics. They can offer collisions of point-like particles at very high energies, since muons can be accelerated in a ring without limitation from synchrotron radiation. However, the need for high luminosity faces technical challenges which arise from the short muon lifetime at rest and the difficulty of producing large numbers of muons in bunches with small emittance. Addressing these challenges requires the development of innovative concepts and demanding technologies. The document summarizes the work done, the progress achieved and new r…
The potential of muon beams for high energy physics applications is described along with the challenges of producing high quality muon beams. Two proposed approaches for delivering high intensity muon beams, a proton driver source and a positron driver source, are described and compared. The proton driver concepts are based on the studies from the Muon Accelerator Program (MAP). The MAP effort focused on a path to deliver muon-based facilities, ranging from neutrino factories to muon colliders, that could span research needs at both the intensity and energy frontiers. The Low EMittance Muon Ac…
Luminosities of muon-proton and muon-nucleus collisions at a recently proposed muon-ion collider (MuIC) at Brookhaven National Laboratory (BNL) in the USA have been estimated using A Luminosity Optimizer for High Energy Physics (AloHEP) software keeping in mind beam-beam tune-shift values. It is shown that L$_{μp}$ = 3.6x10$^{31}$ cm$^{-2}$s$^{-1}$ and L$_{μ{\rm -Au}}$ = 2.84x10$^{27}$ cm$^{-2}$s$^{-1}$ values can be achieved at MuIC. The physics search potential of the collider is superior to HERA. However, LHeC will provide 2 orders of higher luminosities at approximately same center-of-mass…
During the 1990s an international collaboration has been studying the possibility of constructing and operating a high-energy high-luminosity $μ^+μ^-$ collider. Such a machine could be the approach of choice to extend our discovery reach beyond that of the LHC. More recently, a growing collaboration is exploring the potential of a stored-muon-beam "neutrino factory" to elucidate neutrino oscillations. A neutrino factory could be an attractive stepping-stone to a muon collider. Its construction, possibly feasible within the coming decade, could have substantial impact on neutrino physics.
We propose the construction of, and describe in detail, a compact Muon Collider s-channel Higgs Factory.
We propose the development and construction of a novel muon-ion collider (MuIC) at Brookhaven National Laboratory (BNL) in the USA as an upgrade to succeed the electron-ion collider (EIC) that is scheduled to commence in the early 2030s, by a joint effort of the nuclear and particle physics communities. The BNL facility could accommodate a muon storage beam with an energy up to about 1~TeV with existing magnet technology. When collided with a 275~GeV hadron beam, the MuIC center-of-mass energy of about 1~TeV will extend the kinematic coverage of deep inelastic scattering physics at the EIC (wi…
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。