Fresnel zone plates are diffractive elements that are essential to form images in many scientific and technological areas, especially where refractive optics is not available. One of the main shortcomings of Fresnel zone plates, which limit their utility with broadband sources, is their high chromatic aberration. Recently presented, Fractal Zone Plates (FZPs) are diffractive lenses characterized by an extended focal depth with a fractal structure. This behaviour predicts an improved performance of FZPs as image forming devices with an extended depth of field and a reduced chromatic aberration. Here we report the achievement of the first polychromatic images obtained with a FZP that confirm these predictions. We show that the polychromatic modulation transfer function (MTF) of a FZP affected by defocus is about two times better than one corresponding to a Fresnel zone plate. This result opens the possibility to improve imaging techniques that use conventional Fresnel zone plates over a wide range of the electromagnetic spectrum, ranging from x-rays to THz.
In planar metamaterial lenses, the focal point moves with the frequency. Here it is shown numerically that this movement can be controlled by properly engineering the dimensions of the metamaterial-based phase shifters that constitute the lens. In particular, such lenses can be designed to exhibit unusual chromatic aberration with the focal length increasing, rather than decreasing, with the frequency. It is proposed that such an artificial "reverse" chromatic aberration may optimize the transverse resolution of millimeter wave diagnostics of plasmas and be useful in compensating for the natur…
Chromatic aberration in optical systems arises from the wavelength dependence of a glass's refractive index. Polychromatic rays incident upon an optical surface are refracted at slightly different angles and in traversing an optical system follow distinct paths creating images displaced according to color. Although arising from dispersion, it manifests as a spatial distortion correctable only with compound lenses with multiple glasses and accumulates in complicated imaging systems. While chromatic aberration is measured with interferometry, simple methods are attractive for their ease of use a…
Attosecond pulses created by high-order harmonic generation in gases often exhibit strong chromatic aberrations, arising from the broad bandwidth and wavelength-dependent nonlinear light-matter interaction. When the driving laser intensity varies spatially, as for Gaussian driving beams, the apparent source position of the harmonics differs significantly from one order to the next, thus affecting the achievable intensity and duration of the attosecond pulses when they are focused on a target. We show that these chromatic aberrations can be reduced by spatially shaping the fundamental beam to g…
We present full-Maxwell topology-optimization design of a single-piece multlayer metalens, about 10 wavelengths~$λ$ in thickness, that simultaneously focuses over a $60^\circ$ angular range and a 23\% spectral bandwidth without suffering chromatic or angular aberration, a "plan-achromat." At all angles and frequencies it achieves diffraction-limited focusing (Strehl ratio $> 0.8$) and absolute focusing efficiency $> 50$\%. Both 2D and 3D axi-symmetric designs are presented, optimized over $\sim 10^5$ degrees of freedom. We also demonstrate shortening the lens-to-sensor distance while producing…
This paper provides a mathematical approach to study chromatic aberration in metalenses. It is shown that radiation of a given wavelength is refracted according to a generalized Snell's law which together with the notion of envelope yields the existence of phase discontinuities. This is then used to establish a quantitative measure of dispersion in metalenses concluding that in the visible spectrum it has the same order of magnitude as for standard lenses.
The replacement of bulk refractive optical elements with diffractive planar components enables the miniaturization of optical systems. However, diffractive optics suffers from large chromatic aberrations due to the dispersion of the phase accumulated by light during propagation. We show that this limitation can be overcome with an engineered wavelength-dependent phase shift imparted by a metasurface and demonstrate a design that deflects three wavelengths without dispersion. A planar lens without chromatic aberrations at three wavelengths is also presented. Our design is based on low-loss diel…
We propose a lens for atoms with reduced chromatic aberrations and calculate its focal length and spot size. In our scheme a two-level atom interacts with a near-resonant standing light wave formed by two running waves of slightly different wave vectors, and a far-detuned running wave propagating perpendicular to the standing wave. We show that within the Raman-Nath approximation and for an adiabatically slow atom-light interaction, the phase acquired by the atom is independent of the incident atomic velocity.
Three-dimensional (3D) direct laser writing is a powerful technology to create nano- and microscopic optical devices. While the design freedom of this technology offers the possibility to reduce different monochromatic aberrations, reducing chromatic aberrations is often neglected. In this Letter, we successfully demonstrate the combination of refractive and diffractive surfaces to create a refractive/diffractive achromat and show, to the best of our knowledge, the first refractive/diffractive apochromat by using DOEs and simultaneously combining two different photoresists, namely IP-S and IP-…
It is generally thought that correcting chromatic aberrations in imaging requires multiple surfaces. Here, we show that by allowing the phase in the image plane of a flat lens to be a free parameter, it is possible to correct chromatic aberrations over an almost unlimited bandwidth with a single diffractive surface. Specifically, we designed, fabricated and characterized a flat multi-level diffractive lens (MDL) that images at the wavelengths from 450nm to 850nm. We experimentally characterized the focusing efficiency, modulation-transfer function, wavefront aberrations, vignetting, distortion…
Label-Free Multiphoton Microscopy is a very powerful optical microscopy that can be applied to study samples with no need for exogenous fluorescent probes, keeping the main benefits of a Multiphoton approach, like longer penetration depths and intrinsic optical sectioning, while opening the possibility of serial examinations with different kinds of techniques. Among the many variations of Label-Free MPM, Higher Harmonic Generation (HHG) is one of the most intriguing due to its generally low photo-toxicity, which enables the examination of specimens particularly susceptible to photo-damages. HH…
Metalenses are attracting a large interest for the implementation of complex optical functionalities in planar and compact devices. However, chromatic and off-axis aberrations remain standing challenges. Here, we experimentally investigate the broadband behavior of metalenses based on quadratic phase profiles. We show that these metalenses do not only guarantee an arbitrarily large field of view but are also inherently tolerant to longitudinal and transverse chromatic aberrations. As such, we demonstrate a single-layer, silicon metalens with a field of view of 86° and a bandwidth up to 140 nm …
Traditional optical imaging systems can provide high-quality imaging with complicated and expensive optical design by eliminating aberrations. With the help of optical memory effect (ME), not independently improving single imaging parameter, but simultaneously improving several imaging parameters by adding scattering media to the imaging systems was demonstrated firstly. As an example, in a simple single-lens imaging system, except the depth-of-field (DOF) was improved greatly, spherical aberration, coma aberration and chromatic aberration were eliminated simultaneously by placing a scattering…
Conventional imaging systems comprise large and expensive optical components which successively mitigate aberrations. Metasurface optics offers a route to miniaturize imaging systems by replacing bulky components with flat and compact implementations. The diffractive nature of these devices, however, induces severe chromatic aberrations and current multi-wavelength and narrowband achromatic metasurfaces cannot support full visible spectum imaging (400-700 nm). We combine principles of both computational imaging and metasurface optics to build a system with a single metalens of NA ~ 0.45 which …
Nanostructured metasurfaces offer unique capabilities for local control of the phase and amplitude of transmitted and reflected optical waves. Based on this potential, a large number of metasurfaces have been proposed in recent years as alternatives to standard optical elements. In most cases, however, these elements suffer from large chromatic aberrations, thus limiting their usefulness for multi-wavelength or broadband applications. Here, in order to alleviate and correct the chromatic aberrations of individual diffractive elements, we introduce dense vertical stacking of independent metasur…
Metasurface optics have demonstrated vast potential for implementing traditional optical components in an ultra-compact and lightweight form factor. Metasurface lenses, also called metalenses, however, suffer from severe chromatic aberrations, posing serious limitations on their practical use. Existing approaches for circumventing such aberrations via dispersion engineering are limited to small apertures and often entails multiple scatterers per unit cell with small feature sizes. Here, we present an alternative technique to mitigate chromatic aberration and demonstrate high-quality, full-colo…
It is generally assumed that correcting chromatic aberrations in imaging requires optical elements. Here, we show that by allowing the phase in the image plane to be a free parameter, it is possible to correct chromatic variation of focal length over an extremely large bandwidth, from the visible (Vis) to the longwave infrared (LWIR) wavelengths using a single diffractive surface, i.e., a flat lens. Specifically, we designed, fabricated and characterized a flat, multi-level diffractive lens (MDL) with thickness £ 10μm, diameter ~1mm, and focal length = 18mm, which was constant over the operati…
It is generally thought that correcting chromatic aberrations in imaging requires multiple surfaces. Here, we show that by allowing the phase in the image plane of a flat lens to be a free parameter, it is possible to correct chromatic aberrations over a large continuous bandwidth with a single diffractive surface. We experimentally demonstrate imaging using a single flat lens of diameter > 3mm, focal length = 5mm (NA = 0.3, f/1.59) that is achromatic from 0.45um to 1um. This combination of size, NA and operating bandwidth has not been demonstrated in a flat lens before. We experimentally char…
We present a comprehensive formalism for the simulation and optimisation of CRLs in both condensing and full-field imaging configurations. The approach extends ray transfer matrix analysis to account for x-ray attenuation by the lens material. Closed analytical expressions for critical imaging parameters such as numerical aperture, vignetting, chromatic aberration and focal length are provided for both thin- and thick-lens imaging geometries.
A compact near-eye visor (NEV) system that can guide light from a display to the eye could transform augmented reality (AR) technology. Unfortunately, existing implementations of such an NEV either suffer from small field of view or chromatic aberrations. See-through quality and bulkiness further make the overall performance of the visors unsuitable for a seamless user experience. Metasurfaces are an emerging class of nanophotonic elements that can dramatically reduce the size of optical elements while enhancing functionality. In this paper, we present a design of composite metasurfaces for an…
A novel focusing structure with fractal properties is presented. It is a photon sieve in which the pinholes are appropriately distributed over the zones of a fractal zone plate. The focusing properties of the fractal photon sieve are analyzed. The good performance of our proposal is demonstrated experimentally with a series of images obtained under white light illumination. It is shown that compared with a conventional photon sieve, the fractal photon sieve exhibits an extended depth of field and a reduced chromatic aberration.
In this theoretical study, the author firstly discusses the wave interference of Bragg diffraction inside 3D crystal, followed by quantum mechanical interpretation on the diffraction process, and proves that the interference fringe between Bragg diffraction and the incident beam is identical to the lattice plane. By introducing the beam expander concept, we may explain the image projection mechanism of Bragg diffractions propagating through TEM: Transmission Electron Microscope. In practice, we will take projection images at zone axes, because of its symmetric high-density diffractions associa…
A hybrid imaging system is a simultaneous physical arrangement of a refractive lens and a multilevel phase mask (MPM) as a diffractive optical element (DOE). The favorable properties of the hybrid setup are improved extended-depth-of-field (EDoF) imaging and low chromatic aberrations. We built a fully differentiable image formation model in order to use neural network techniques to optimize imaging. At the first stage, the design framework relies on the model-based approach with numerical simulation and end-to-end joint optimization of both MPM and imaging algorithms. In the second stage, MPM …
