Cooling of a 58 MHz micro-mechanical resonator from room temperature to 11 K is demonstrated using cavity enhanced radiation pressure. Detuned pumping of an optical resonance allows enhancement of the blue shifted motional sideband (caused by the oscillator's Brownian motion) with respect to the red-shifted sideband leading to cooling of the mechanical oscillator mode. The reported cooling mechanism is a manifestation of the effect of radiation pressure induced dynamical backaction. These results constitute an important step towards achieving ground state cooling of a mechanical oscillator.
We present a temperature enhanced photothermal cooling scheme in a micro-cantilever based FP cavity. Experiments at various temperatures show a temperature dependence of photothermal cooling efficiency. And approximate one order of improvement on the cooling efficiency is achieved experimentally when the temperature decreases from 298 K to 100 K. Numerical analysis reveals that the dramatic change of the cooling efficiency is attributed to the temperature dependent dynamics of the photothermal backaction. A high efficient cooling can be achieved by controlling the temperature for an optimized …
We explore the laser spot position (LSP) dependent photothermal mode cooling of a micro-cantilever in a Fabry-Pérot (FP) cavity. Depending on the LSP along the lever, photothermal coupling to the first two mechanical modes can be either parallel or anti-parallel. This LSP dependent behavior is analyzed theoretically by a simple model, which is in quantitatively agreement with our experimental observation. From simulation, the parallel and anti-parallel coupling region is identified along the lever. We conclude that a more efficient mode cooling may be achieved in the parallel coupling region.
We propose a technique aimed at cooling a harmonically oscillating mirror mechanically coupled to another vibrating mirror to its quantum mechanical ground state. Our method involves optmechanical coupling between two optical cavities. We show that the cooling can be controlled by the mechanical coupling strength between the two movable mirrors, the phase difference between the mechanical modes of the two oscillating mirrors and the photon number in each cavity. We also show that both mechanical and optical cooling can be achieved by transferring energy from one cavity to the other. We also an…
Cavity opto-mechanics enabled radiation-pressure coupling between optical and mechanical modes of a micro-mechanical resonator gives rise to dynamical backaction, enabling amplification and cooling of mechanical motion. Due to a combination of large mechanical oscillations and necessary saturation of amplification, the noise floor of the opto-mechanical resonator increases, rendering it ineffective at transducing small signals, and thereby cooling another mechanical resonance of the system. Here we show amplification of one mechanical resonance in a micro-mechanical ring resonator while simult…
Ground state cooling of micromechanical oscillator is a paradigmatic goal for observing quantum mechanical effects in cavity optomechanics. We study theoretically the ground state cooling of a mechanical oscillator in an optomechanical cavity in presence of a quantum well placed inside the cavity. Due to mode tailoring in presence of the quantum well, the cavity response gets modified and leads to asymmetric heating and cooling processes. This facilitates the cooling of the mechanical oscillator even in the unresolved-sideband regime, via inhibition of Stokes scattering.
We demonstrate simultaneous center-of-mass cooling of two coupled oscillators, consisting of a microsphere-cantilever and a tapered optical fiber. Excitation of a whispering gallery mode (WGM) of the microsphere, via the evanescent field of the taper, provides a transduction signal that continuously monitors the relative motion between these two microgram objects with a sensitivity of 3 pm. The cavity enhanced optical dipole force is used to provide feedback damping on the motion of the micron-diameter taper, whereas a piezo stack is used to damp the motion of the much larger (up to $180\,μ$m …
The ground state cooling of a mechanical oscillator in an optomechanical cavity containing an ensemble of identical two-level ground-state atoms is studied in the highly unresolved-sideband regime. The system exhibits electromagnetically-induced transparency-like quantum interference effect. The mutual interaction with the cavity optical field gives rise to an indirect coupling between the atomic and mechanical modes. In presence of this interaction, the noise spectrum gets modified and leads to asymmetric cooling and heating rates. Using the quantum master equation, time evolution of the aver…
The radiation pressure of light can act to damp and cool the vibrational motion of a mechanical resonator. In understanding the quantum limits of this cooling, one must consider the effect of shot noise fluctuations on the final thermal occupation. In optomechanical sideband cooling in a cavity, the finite Stokes Raman scattering defined by the cavity linewidth combined with shot noise fluctuations dictates a quantum backaction limit, analogous to the Doppler limit of atomic laser cooling. In our work we sideband cool to the quantum backaction limit by using a micromechanical membrane precoole…
In this work we combine the large per-photon optical gradient force with the sensitive feedback of a high quality factor whispering-gallery microcavity. The cavity geometry, consisting of a pair of silica disks separated by a nanoscale gap, shows extremely strong dynamical backaction, powerful enough to excite giant coherent oscillations even under heavily damped conditions (mechanical Q=4). In vacuum, the threshold for regenerative mechanical oscillation is lowered to an optical input power of only 270-nanoWatts, or roughly 1000 stored cavity photons, and efficient cooling of the mechanical m…
Recent advances in power scaling of fiber lasers are hindered by the thermal issues, which deteriorate the beam quality. Anti-Stokes fluorescence cooling has been suggested as a viable method to balance the heat generated by the quantum defect and background absorption. Such radiation-balanced configurations rely on the availability of cooling-grade rare-earth-doped gain materials. Herein, we perform a series of tests on a ytterbium-doped ZBLAN optical fiber to extract its laser cooling-related parameters and show that it is a viable laser cooling medium for radiation-balancing. In particular,…
We provide a general framework to describe cooling of a micromechanical oscillator to its quantum ground state by means of radiation-pressure coupling with a driven optical cavity. We apply it to two experimentally realized schemes, back-action cooling via a detuned cavity and cold-damping quantum-feedback cooling, and we determine the ultimate quantum limits of both schemes for the full parameter range of a stable cavity. While both allow to reach the oscillator's quantum ground state, we find that back-action cooling is more efficient in the good cavity limit, i.e. when the cavity bandwidth …
Controlling the dynamics of mechanical resonators is central to many quantum science and metrology applications. Optomechanical control of diamond resonators is attractive owing to diamond's excellent physical properties and its ability to host electronic spins that can be coherently coupled to mechanical motion. Using a confocal microscope, we demonstrate tunable amplification and damping of a diamond nanomechanical resonator's motion. Observation of both normal mode cooling from room temperature to 80K, and amplification into self--oscillations with $60\,μ\text{W}$ of optical power is observ…
One of the most effective methods for cooling micro and nano devices to ultra low temperatures is the sideband method. Currently, this approach is being studied experimentally and theoretically. Theoretical results that relate to this method correspond to the case of the interaction of an electromagnetic field with a micro or nano resonator through radiation pressure. Obviously, if you choose a charged micro or nano resonator, the interaction will be different. In this paper, this case is considered and it is shown that cooling will be as effective as in the sideband method. The resulting fina…
Quantum ground-state cooling of macroscopic mechanical resonators is of essential importance to both fundamental physics and applied science. Conventional method of laser cooling is limited by the quantum backaction, which requires mechanical sideband resolved in order to cool to ground state. This work presents an idea to break the quantum backaction limit by engineering intracavity optical squeezing. It gives rise to quantum interference for all the dissipation channels, and under certain circumstances can totally remove the influence of the cavity dissipation and the resultant quantum backa…
We present a simple classical analysis of light interacting with a Fabry-Perot cavity consisting of a fixed (dielectric) front mirror and a vibrating rear mirror. In the adiabatic approximation, the returning light exhibits sideband symmetry, which will go away once the photon lifetime becomes comparable to or longer than the oscillation period of the rear mirror. When the oscillation period is short compared to the cavity photon lifetime, one must approach the problem differently, treating the vibrating mirror as a scatterer which sends a fraction of the incident light into sideband frequenci…
Diamond cavity optomechanical devices hold great promise for quantum technology based on coherent coupling between photons, phonons and spins. These devices benefit from the exceptional physical properties of diamond, including its low mechanical dissipation and optical absorption. However the nanoscale dimensions and mechanical isolation of these devices can make them susceptible to thermo-optic instability when operating at the high intracavity field strengths needed to realize coherent photon--phonon coupling. In this work, we overcome these effects through engineering of the device geometr…
Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively-pumped to ultra-high-vacuum (UHV) to achieve laser cooling. A grating magneto optical trap (GMOT) is incorporated with the 4 mm-thick Si/glass vacuum cell to demonstrate the feasibility of a fully-miniaturized laser cooling platform. A two-step optical excitation process in rubidium is used to overcome surface-scatter limitations to the GMOT imaging. The unambiguous miniaturization and form-customi…
While radiation-pressure cooling is well known, the Brillouin scattering of light from sound is considered an acousto-optical amplification-only process. It was suggested that cooling could be possible in multi-resonance Brillouin systems when phonons experience lower damping than light. However, this regime was not accessible in traditional Brillouin systems since backscattering enforces high acoustical frequencies associated with high mechanical damping. Recently, forward Brillouin scattering in microcavities has allowed access to low-frequency acoustical modes where mechanical dissipation i…
We propose a mass sensor using optically trapped and cooled dielectric microdisks with "measuring after cooling" scheme. The center-of-mass motion of a trapped particle in vacuum can experience extremely low dissipation resulting in robust decoupling from the heat bath. Thus the measurement can be accomplished in a short time before a jump in the phonon number after the optomechanical cooling is finished. This method can lead to 10^(-6) dalton mass sensitivity which is a thousand times smaller than the mass of one electron.
Laser cooling of atoms usually necessitates several laser frequencies. Alkaline atoms, for example, are cooled by two lasers with a frequency difference in the Gigahertz range. This gap cannot be closed with simple shifting techniques. Here, we present a method of generating sidebands at 6.6 GHz by modulating the current of a tapered amplifier which is seeded by an unmodulated master laser. The sidebands enable trapping of 1.1*10^9 Rubidium 87 atoms in a chip-based magneto-optical trap. Compared to the direct modulation of the master laser, this method allows for an easy implementation, a fast…
Laser cooling of mesoscopic mechanical resonators is of great interest for both fundamental studies and practical applications. We provide a general framework to describe the cavity-assisted backaction cooling in the strong coupling regime. By studying the cooling dynamics, we find that the temporal evolution of mean phonon number oscillates as a function of the optomechanical coupling strength depending on frequency mixing. The further analytical result reveals that the optimal cooling limit is obtained when the system eigenmodes satisfy the frequency matching condition. The reduced instantan…
We report a spin-orbit coupling induced back-action cooling in an optomechanical system, composed of a spin-orbit coupled Bose-Einstein condensate trapped in an optical cavity with one movable end mirror, by suppressing heating effects of quantum noises. The collective density excitations of the spin-orbit coupling mediated hyperfine states - serving as atomic oscillators equally coupled to the cavity field - trigger strongly driven atomic back-action. We find that the back-action not only revamps low-temperature dynamics of its own but also provides an opportunity to cool the mechanical mirro…
We discuss a hybrid quantum system where a dielectric membrane situated inside an optical cavity is coupled to a distant atomic ensemble trapped in an optical lattice. The coupling is mediated by the exchange of sideband photons of the lattice laser, and is enhanced by the cavity finesse as well as the square root of the number of atoms. In addition to observing coherent dynamics between the two systems, one can also switch on a tailored dissipation by laser cooling the atoms, thereby allowing for sympathetic cooling of the membrane. The resulting cooling scheme does not require resolved sideb…
