A tapered semiconductor amplifier is injection seeded by a femtosecond optical frequency comb at 780 nm from a mode-locked Ti:sapphire laser. Energy gains over 17 dB (12 dB) are obtained for 1 mW (20 mW) of average input power when the input pulses are stretched into the picosecond range. A spectral window of supercontinuum light generated in a photonic fiber has also been amplified. Interferometric measurements show sub-hertz linewidths for a heterodyne beat between the input and amplified comb components, yielding no detectable phase-noise degradation under amplification. These amplifiers can be used to boost the infrared power in f-to-2f interferometers used to determine the carrier-to-envelope offset frequency, with clear advantages for stabilization of octave-spanning femtosecond lasers and other supercontinuum light sources with very limited power in the infrared.
We have experimentally studied the multiple side-band generation for two-frequency components injected into a tapered amplifier and demonstrated its effects on atomic laser cooling. A heterodyne frequency-beat measurement and a Fabry Perot interferometer have been applied to analyze the side-band generation with different experimental parameters, such as frequency difference, injection laser power and tapered amplifier current. In laser cooling potassium40 and potassium41 with hyperfine splitting of 1.3GHz and 254MHz, respectively, the side-band generation with a small frequency difference has…
We report on the phase-locking of two diode lasers based on self-seeded tapered amplifiers. In these lasers, a reduction of linewidth is achieved using narrow-band high-transmission interference filters for frequency selection. The lasers combine a compact design with a Lorentzian linewidth below 200 kHz at an output power of 300 mW. We characterize the phase noise of the phase-locked laser system and study its potential for coherent beam-splitting in atom interferometers.
We describe a system for generating frequency-chirped and amplitude-shaped pulses on time scales from sub-nanosecond to ten nanoseconds. The system starts with cw diode-laser light at 780 nm and utilizes fiber-based electro-optical phase and intensity modulators, driven by an arbitrary waveform generator, to generate the shaped pulses. These pulses are subsequently amplified to several hundred mW with a tapered amplifier in a delayed double-pass configuration. Frequency chirps up to 5 GHz in 2 ns and pulse widths as short as 0.15 ns have been realized.
We present a frequency-shifted feedback (FSF) laser based on a tapered amplifier. The laser operates as a coherent broadband source with up to 370GHz spectral width and 2.3us coherence time. If the FSF laser is seeded by a continuous-wave laser a frequency comb spanning the output spectrum appears in addition to the broadband emission. The laser has an output power of 280mW and a center wavelength of 780nm. The ease and flexibility of use of tapered amplifiers makes our FSF laser attractive for a wide range of applications, especially in metrology.
We develop a high-power narrow-linewidth fiber amplifier based on a tapered Yb-doped fiber. In the experiment, the narrow end of the tapered fiber is used as the input port of both pump source and signal light to form a robust all-fiber configuration. The stimulated Brillouin scattering (SBS) is effectively suppressed owing to its gradually increased mode area as well as continuously changed Brillouin frequency shift dependent on the core diameter. As a result, an output power of 260 W without SBS and mode instability (MI) is obtained, with a slope efficiency of 71.3 % and a narrow linewidth o…
Laser cooling of atoms usually necessitates several laser frequencies. Alkaline atoms, for example, are cooled by two lasers with a frequency difference in the Gigahertz range. This gap cannot be closed with simple shifting techniques. Here, we present a method of generating sidebands at 6.6 GHz by modulating the current of a tapered amplifier which is seeded by an unmodulated master laser. The sidebands enable trapping of 1.1*10^9 Rubidium 87 atoms in a chip-based magneto-optical trap. Compared to the direct modulation of the master laser, this method allows for an easy implementation, a fast…
We developed a simple three-stage amplifying tunable cw diode laser system that comprises: a Littrow configuration master laser, frequency stabilized with a dichroic atomic vapor laser lock (DAVLL), an acousto-optic frequency shifter (AOM), an injection-locked slave laser and a tapered amplifier (TA). Slave amplifies the frequency-shifted beam and suppresses (within 0.5%) the strong dependence of its intensity on the AOM carrier frequency, thus acting as an efficient optical limiter. The beam is further amplified in TA. System operates at 780 nm, with an output power above 700 mW, a time-avera…
We experimentally demonstrate spatial beam self-cleaning in an Yb-doped graded-index multimode fiber taper, both in passive and active configurations. The input laser beam at 1064 nm was injected for propagation from the small to the large core side of the taper, with laser diode pumping in a counterdirectional configuration. The Kerr effect permits to obtain high-beam quality amplification with no accompanying frequency conversions. As a result, our nonlinear taper amplifier may provide an important building block for multimode fiber lasers and amplifiers.
We describe a compact waveguide amplifier system that is suitable for optically pumping rubidium magnetometers. The system consists of an auto-locking vacuum-sealed external cavity diode laser, a semiconductor tapered amplifier and a pulsing unit based on an acousto-optic modulator. The diode laser utilises optical feedback from an interference filter to narrow the linewidth of an inexpensive laser diode to ~500 kHz. This output is scannable over an 8 GHz range (at 780 nm) and can be locked without human intervention to any spectral marker in an expandable library of reference spectra, using t…
We study the degree of second-order coherence of the emission of a high-power multi-quantum well superluminescent diode with a lateral tapered amplifier section with and without feedback. When operated in an external cavity, the degree of second-order coherence changed from the almost thermal case of g$^{(2)}$(0)$\approx$1.9 towards the mostly coherent case of g$^{(2)}$(0)$\approx$1.2 when the injection current at the tapered section was increased. We found good agreement with semi-classical laser theory near and below threshold while above laser threshold a slightly higher g$^{(2)}$(0) was ob…
We present a resonantly frequency-doubled tapered amplified semiconductor laser system emitting up to 2.6 W blue light at 400 nm. The output power is stable on both short and long timescales with 0.12% RMS relative intensity noise, and less than 0.15%/h relative power loss over 16 hours of free running continuous operation. Furthermore, the output power can be actively stabilized, and the alignment of the input beams of the tapered amplifier chip, the frequency doubling cavity and-in case of fiber output-the fiber can be optimized automatically using computer-controlled mirrors.
We demonstrate mid-infrared (mid-IR) supercontinuum generation (SCG) with instantaneous bandwidth from 2.2 to 5 μm at 40 dB below the peak, covering the wavelength range desirable for molecular spectroscopy and numerous other applications. The SCG occurs in a tapered As2S3 fiber prepared by in-situ tapering and is pumped by femtosecond pulses from the subharmonic of a mode-locked Er-doped fiber laser. Interference with a narrow linewidth c.w. laser verifies that the coherence properties of the near-IR frequency comb have been preserved through these cascaded nonlinear processes. With this appr…
Continuous-wave output at 229 nm for the application of laser cooling of Cd atoms was generated by the 4th harmonic using two successive second harmonic generation stages. Employing a single-frequency optically pumped semiconductor laser as a fundamental source, 0.56 W of output at 229 nm was observed with a 10-mm long, Brewster-cut BBO crystal in an external cavity with 1.62 W of 458 nm input. Conversion efficiency from 458 nm to 229 nm was more than 34%. By applying a tapered amplifier as a fundamental source, we demonstrated magneto-optical trapping of all stable Cd isotopes including isoto…
Optical detection of structures with dimensions smaller than an optical wavelength requires devices that work on scales beyond the diffraction limit. Here we present the possibility of using a tapered optical nanofiber as a detector to resolve individual atoms trapped in an optical lattice in the Mott Insulator phase. We show that the small size of the fiber combined with an enhanced photon collection rate can allow for the attainment of large and reliable measurement signals.
We demonstrate a simple method to obtain accurate optical waveforms with a GHz-level programmable modulation bandwidth and Watt-level output power for wideband optical control of free atoms and molecules. Arbitrary amplitude and phase modulations are transferred from microwave to light with a low-power fiber electro-optical modulator. The sub-milliWatt optical sideband is co-amplified with the optical carrier in a power-balanced fashion through a tapered semiconductor amplifier (TSA). By automatically keeping TSA near saturation in a quasi-continuous manner, typical noise channels associated w…
A nanofiber-based optical tweezer is demonstrated. Trapping is achieved by combining attractive near-field optical gradient forces with repulsive electrostatic forces. Silica-coated Fe$_2$O$_3$ nanospheres of 300 diameter are trapped as close as 50 nm away from the surface with 810 $μ$W of optical power, with a maximum trap stiffness of 2.7 pN $μ$m$^{-1}$. Electrostatic trapping forces up to 0.5 pN are achieved, a factor of 50 larger than those achievable for the same optical power in conventional optical tweezers. Efficient collection of the optical field directly into the nanofiber enables u…
The advent of optical frequency standards with ultimate uncertainties in the low 1x10$^{-18}$ requires femtosecond frequency combs to support a similar level of resolution in the spectral transfer and the computation of optical frequency ratios. The related experimental challenges grow together with the number of optical frequencies to be measured simultaneously, as in many cases the comb's optical power does not allow reliable beatnote counting or tracking in all the spectral regions of interest. Here we describe the use of a track-and-hold amplifier to implement the gated detection, a previo…
An ultrafast fiber chirped-pulse amplifier comprising 8 coherently combined amplifier channels is presented. The laser delivers 1 kW average power at 1 mJ pulse energy and 260 fs pulse duration. Excellent beam quality and low noise performance are confirmed. The laser has proven suitable for demanding scientific applications. Further power scaling is possible right away using even more amplifier channels
We report on an asymmetric high energy dual optical parametric amplifier (OPA) which is capable of having either the idlers, signals, or depleted pumps, relatively phase locked at commensurate or incommensurate wavelengths. Idlers and signals can be locked on the order of 200 mrad rms or better, corresponding to a 212 as jitter at $λ$=2$μ$m. The high energy arm of the OPA outputs a combined 3.5 mJ of signal and idler, while the low energy arm outputs 1.5 mJ, with the entire system being pumped with a 1 kHz, 18 mJ Ti:Sapphire laser. Both arms are independently tunable from 1080 nm-2600 nm. The …
In this work we analyze the power scaling potential of amplifying multicore fibers (MCFs) used in coherently-combined systems. In particular, in this study we exemplarily consider rod-type MCFs with 2x2 up to 10x10 Ytterbium doped cores arranged in a squared pattern. We will show that, even though increasing the number of active cores will lead to higher output powers, particular attention has to be paid to arising thermal effects, which potentially degrade the performance of these systems. Additionally, we analyze the influence of the core dimensions on the extractable and combinable output p…
The influence of low temperatures on the performance of a high-power single-frequency fiber laser amplifier is evaluated with a numerical simulation. Cooling the fiber can allow to take advantage of both higher damping of the acoustic waves in the silica glass, and higher laser efficiency. We first report on the measurement of the stimulated Brillouin scattering (SBS) threshold in a silica fiber as a function of the temperature from 300~K down to 77~K. We then present the measurements of small-signal absorption and gain spectra of an erbium doped alumino-phosphosilicate fiber, at room temperat…
We present a 2-\mum frequency comb based on a reliable mode-locked Er:fiber laser with 100 MHz repetition rate. After shifting the spectrum of the amplified Er:fiber comb to longer wavelengths, a single-clad Tm/Ho:fiber is used as a self-pumped pre-amplifier to generate a coherent and broadband spectrum centered at 1.93 \mum. Subsequently, a cladding-pumped Tm:fiber amplifier boosts the system to a maximum output power of 4.8 W at 1.96 \mum. After compression in a compact grating compressor, our amplified Er:fiber/Tm:fiber hybrid system delivers as much as 2.9 W with a pulse duration of 141 fs…
Modeling Light Propagation and Amplification Efficiency in Highly Multimode, Yb-doped Fiber Amplifiers
Adelaide University（阿德莱德大学）；Yale University（耶鲁大学）；OzGrav - Australian Research Council Centre of Excellence for Gravitational Wave Discovery, Adelaide Node（OzGrav-澳大利亚研究委员会引力波发现卓越中心，阿德莱德节点）；Future Industries Institute（未来产业研究所）
Tunable lasers emitting at a 2-3 $μ$m wavelength range and compatible with photonic integration platforms are of great interest for sensing applications. To this end, combining GaSb-based semiconductor gain chips with Si$_3$N$_4$ photonic integrated circuits offers an attractive platform. Herein, we exploit the low-loss features of Si$_3$N$_4$ waveguides and demonstrate a hybrid laser comprising a GaSb gain chip with an integrated tunable Si$_3$N$_4$ Vernier mirror. At room temperature, the laser exhibited a maximum output power of 15 mW and a tuning range of 80 nm (1937-2017 nm). The low-loss…
Femtosecond dual-comb lasers have revolutionized linear Fourier-domain spectroscopy by offering a rapid motion-free, precise and accurate measurement mode with easy registration of the combs beat note in the RF domain. Extensions of this technique found already application for nonlinear time-resolved spectroscopy within the energy limit available from sources operating at the full oscillator repetition rate. Here, we present a technique based on time filtering of femtosecond frequency combs by pulse gating in a laser amplifier. This gives the required boost to the pulse energy and provides the…
We observe high optical quality factor (Q) polygonal and star coherent optical modes in a lithium niobate microdisk. In contrast to the previous polygon modes achieved by deformed microcavities at lower mechanical and optical Q, we adopted weak perturbation from a tapered fiber for the polygon mode formation. The resulting high intracavity optical power of the polygon modes triggers second harmonic generation at high efficiency. With the combined advantage of high mechanical Q cavity optomechanical oscillation was observed for the first time. Finally, we observe frequency microcomb generation …
Chip-based optical amplifiers can significantly expand the functionalities of photonic devices. In particular, optical-parametric amplifiers (OPAs), with engineerable gain-spectra, are well-suited for nonlinear-photonic applications. Chip-based OPAs typically require long waveguides that occupy a large footprint, and high pump powers that cannot be easily produced with chip-scale lasers. We theoretically and experimentally demonstrate a microresonator-assisted regenerative OPA that benefits from the large nonlinearity enhancement of microresonators and yields a high gain in a small footprint. …
We present a scheme of quantum state truncation in the Fock basis (quantum scissors), based on the combined action of a nondegenerate optical parametric amplifier and a beamsplitter. Differently from previously proposed linear-optics-based quantum scissors devices, which depend on reliable Fock states sources, our scheme requires only readily available Gaussian states, such as coherent states inputs (vacuum state included). A truncated state is generated after performing photodetections in the global state. We find that, depending on which output ports each of the two photodetectors is positio…
We present a coherently combined laser amplifier with 16 channels from a multicore fiber in a proof-of-principle demonstration. Filled aperture beam splitting and combination together with temporal phasing is realized in a compact and low-component-count setup. Combined average power of up to 70 W with 40 ps pulses are achieved with combination efficiencies around 80%.
Photon Blockade Mediated by Two-Photon Absorption in an Optical Parametric Amplifier
School of Optical and Electronic Information, Huazhong University of Science and Technology（华中科技大学光学与电子信息学院）；Synopsys, Inc.（新思科技）；Elmore Family School of Electrical and Computer Engineering, Purdue University（普渡大学埃尔莫电气与计算机工程学院）
Optical communication systems, operating in C-band, are reaching their theoretically achievable capacity limits. An attractive and economically viable solution to satisfy the future data rate demands is to employ the transmission across the full low-loss spectrum encompassing O, E, S, C and L band of the single mode fibers (SMF). Utilizing all five bands offers a bandwidth of up to $\sim$53.5THz (365nm) with loss below 0.4dB/km. A key component in realizing multi-band optical communication systems is the optical amplifier. Apart from having an ultra-wide gain profile, the ability of providing …
All-optical signal processing is envisioned as an approach to dramatically decrease power consumption and speed up performance of next-generation optical telecommunications networks. Nonlinear optical effects, such as four-wave mixing (FWM) and parametric gain, have long been explored to realize all-optical functions in glass fibers. An alternative approach is to employ nanoscale engineering of silicon waveguides to enhance the optical nonlinearities by up to five orders of magnitude, enabling integrated chip-scale all-optical signal processing. Previously, strong two-photon absorption (TPA) o…
We study the interplay between coherent light-matter interactions and non-resonant pulse propagation effects when ultra-short pulses propagate in room-temperature quantum-dot (QD) semiconductor optical amplifiers (SOAs). The signatures observed on a pulse envelope after propagating in a transparent SOA, when coherent Rabi-oscillations are absent, highlight the contribution of two-photon absorption (TPA), and its accompanying Kerr-like effect, as well as of linear dispersion, to the modification of the pulse complex electric field profile. These effects are incorporated into our previously deve…
