arXiv physics/04091042004-09-20physics.flu-dynphysics.comp-phphysics.ed-ph

Possibilities of Simulation of Fluid Flows Using the Modern CFD Software Tools

Alexey N. Kochevsky

备注：: PDF, 12 pages, no figures

英文摘要：

The article reviews fluid flow models implemented in the leading CFD software tools and designed for simulation of multi-component and multi-phase flows, compressible flows, flows with heat transfer, cavitation and other phenomena. The article shows that these software tools (CFX, Fluent, STAR-CD, etc.) allow for adequate simulation of complex physical effects of different nature, even for problems where performing of physical experiment is extremely difficult.

机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。

阅读原文

阅读 PDF ↗

arXiv 页面 ↗HTML 原文 ↗

本文内容

英文摘要相关论文

机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。

继续探索

相关论文

Capabilities of Numerical Simulation of Multiphase Flows in Centrifugal Pumps using Modern CFD Software

The paper describes capabilities of numerical simulation of liquid flows with solid and/or gas admixtures in centrifugal pumps using modern commercial CFD software packages, with the purpose to predict performance curves of the pumps treating such media. In particular, the approaches and multiphase flow models available in the package CFX-5 are described; their advantages and disadvantages are analyzed.

2005-09-22physics.comp-phphysics.flu-dyn

利用重复矩阵块结构在现代超级计算机上实现更高效的CFD

Exploiting repeated matrix block structures for more efficient CFD on modern supercomputers

Heat and Mass Transfer Technological Centre, Technical University of Catalonia（热质传输技术中心，加泰罗尼亚理工大学）；Department of Information Engineering, University of Padova（帕多瓦大学信息工程系）；High Performance Computing and Visualiztion Team, SURF（SURF高性能计算与可视化团队）

提出通过将稀疏矩阵向量积转化为稀疏矩阵矩阵积并采用网格细化策略，提高CFD计算强度，在多个测试案例中实现显著加速。

2026-04-29physics.comp-phphysics.flu-dyn

A Deep Learning Framework for Hydrogen-fueled Turbulent Combustion Simulation

The high cost of high-resolution computational fluid/flame dynamics (CFD) has hindered its application in combustion related design, research and optimization. In this study, we propose a new framework for turbulent combustion simulation based on the deep learning approach. An optimized deep convolutional neural network (CNN) inspired from a U-Net architecture and inception module is designed for constructing the framework of the deep learning solver, named CFDNN. CFDNN is then trained on the simulation results of hydrogen combustion in a cavity with different inlet velocities. After training,…

2020-03-01physics.flu-dyn

Contemporary Approach for Simulation and Computation of Fluid Flows in Centrifugal Hydromachines

The article describes various aspects of mathematical modeling of fluid flows, both in general and with reference to hydraulic machinery. The article reviews historical development of corresponding methods of mathematical modeling. Implementation of these aspects in modern commercial CFD software tools is described together with advantages and disadvantages of implemented methods. The conclusion is drawn concerning possibilities of computation of fluid flows nowadays.

2004-09-20physics.comp-phphysics.ed-phphysics.flu-dyn

基于OpenFOAM与SmartSim的机器学习与计算流体动力学结合方法

Combining Machine Learning with Computational Fluid Dynamics using OpenFOAM and SmartSim

TU Darmstadt（达姆施塔特工业大学）；Hewlett Packard Enterprise（惠普企业）；TU Dresden（德累斯顿工业大学）

本研究针对CFD+ML算法在大规模问题中实现困难的痛点，基于开源软件OpenFOAM与SmartSim提出高效可扩展的耦合方案，简化编程并保障数据交换，覆盖多模块耦合，还提供带示例的子模块供实际应用开发参考。

2024-04-23cs.LGphysics.flu-dyn

lifex-cfd：用于心血管应用的开源计算流体力学求解器

lifex-cfd: an open-source computational fluid dynamics solver for cardiovascular applications

本文提出lifex-cfd，一个基于lifex库的开源心血管CFD求解器，通过不可压缩Navier-Stokes方程建模血流，经收敛分析验证并展示接近理想并行加速比，证明了其在患者特异性模拟中的准确性与可靠性。

2023-11-20cs.MScs.NAmath.NA

更多相关论文收起更多论文

通过局部机器学习修正改进CFD模拟

Improving CFD simulations by local machine-learned correction

University of Massachusetts（马萨诸塞大学）；MathWorks（MathWorks公司）

针对高保真CFD模拟成本高的问题，提出用机器学习预测离散化误差并补偿粗网格信息，在不牺牲精度下提升速度，并在三维湍流通道流中验证了数值稳定性。

2023-04-28cs.LGphysics.flu-dyn

使用CFD Level-Set方法模拟通过活塞环组的窜气与机油燃油稀释多相流动

Multiphase Flow Simulation of Blow-by and Fuel-in-Oil Dilution via the Piston Ring Pack Using the CFD Level-Set Method

本文提出了一种基于CFD level-set方法的瞬态可压缩多相流模拟技术，用于研究柴油机活塞环组周围的窜气与机油燃油稀释问题，并在Ford 2.0L I4发动机上验证了方法有效性，提出了减少燃油向曲轴箱输运的活塞设计建议。

2024-06-04cs.CEcs.NAmath.NA

水工程中流体动力学数学模型与数值方法综述

Survey of Mathematical Models of and Numerical Methods for Fluid Dynamics Water Engineering

本文综述了水工程中流体动力学数学模型与数值方法的发展，涵盖从浅水方程到纳维-斯托克斯模型的多种方法，并讨论了实际应用中的关键问题及新兴技术。

2025-12-18physics.flu-dyn

利用机器学习模型预测多孔介质稳态流

Prediction of Steady-State Flow through Porous Media Using Machine Learning Models

Department of Mechanical Engineering, Imperial College London（帝国理工学院伦敦校区机械工程系）

本文提出利用FNO模型高效预测多孔介质稳态流，相比传统CFD方法，FNO在精度和速度上均表现优异，适用于拓扑优化任务。

2026-03-06cs.CEcs.LGphysics.comp-ph

OpenFOAM框架下适用于全速度流动的现代激波捕捉格式评估

Assessment of modern shock capturing schemes for all-speed flows in the OpenFOAM framework

本研究在OpenFOAM框架中实现多种高阶激波捕捉格式，通过不同复杂度算例评估各格式的精度、稳定性与适用场景，为用户针对特定流动 regime 选择合适格式提供参考。

2025-10-28physics.flu-dyn

模块化超级计算架构上可扩展高保真计算流体力学的经验与分析

Experience and Analysis of Scalable High-Fidelity Computational Fluid Dynamics on Modular Supercomputing Architectures

本文评估谱元法高保真 CFD 在 GPU/CPU 模块化超算上的跨模块分区运行，并用性能模型指出其仅在 GPU 总内存不足时可能带来收益。

2024-05-09cs.DCcs.MSphysics.flu-dyn

Review of fluid flow and convective heat transfer within rotating disk cavities with impinging jet

Fluid flow and convective heat transfer in rotor-stator configurations, which are of great importance in different engineering applications, are treated in details in this review. The review focuses on convective heat transfer in predominantly outward air flow in the rotor-stator geometries with and without impinging jets and incorporates two main parts, namely, experimental/theoretical methodologies and geometries/results. Experimental methodologies include naphthalene sublimation techniques, steady state (thin layer) and transient (thermochromic liquid crystals) thermal measurements, thermoc…

2013-05-13physics.flu-dyn

Development of a Data-driven Turbulence Model for 3d Thermal Stratification Simulation during Reactor Transients

SAM, a plant-level system analysis tool for advanced reactors (SFR, LFR, MSR/FHR) is under development at Argonne. As a modern system code, SAM aims to improve the predictions of 3D flows relevant to reactor safety during transient conditions. In order to fulfill this goal, one approach is to implement modeling of turbulent flow in SAM through establishing an embedded surrogate model for Reynolds stress/turbulence viscosity based on machine learning techniques. The proposed approach is based on an assumption that there exists a functional dependency relationship between local flow features and…

2020-05-01physics.flu-dyn

Valid Physical Processes from Numerical Discontinuities in Computational Fluid Dynamics

Due to the limited cell resolution in the representation of flow variables, a piecewise continuous initial reconstruction with discontinuous jump at a cell interface is usually used in modern computational fluid dynamics methods. Starting from the discontinuity, a Riemann problem in the Godunov method is solved for the flux evaluation across the cell interface in a finite volume scheme. With the increasing of Mach number in the CFD simulations, the adaptation of the Riemann solver seems introduce intrinsically a mechanism to develop instabilities in strong shock regions. Theoretically, the Rie…

2010-09-22math-phmath.MPphysics.flu-dyn