用新的Vme控制器在Spring-8升级直线加速器控制系统
Upgrade of Linac Control System with New Vme Controllers at Spring-8
摘要：
2000年9月，我们在SPring-8标准系统上集成了一个注入器直线加速器控制系统。由于这种集成，SPring-8加速器复合体由一个统一的系统控制。由于直线加速器不仅作为SPring-8储存环的电子束注入器，而且还作为New SUBARU的电子束注入器连续运行，因此我们必须最大限度地减少硬件修改，以减少新控制系统的开发和测试时间。积分方法与助推器同步加速器的积分方法基本相同。我们在这里报告的直线加速器控制系统的集成，重点是VMEbus控制器和软件的升级，涉及操作系统Solaris 7作为实时操作系统。
英文摘要：
We integrated an injector linac control system to the SPring-8 standard system on September 2000. As a result of this integration, the SPring-8 accelerator complex was controlled by one unified system. Because the linac was continuously running as the electron beam injector not only for the SPring-8 storage ring but also for New SUBARU, we had to minimize the hardware modification to reduce the time for the development and testing of the new control system. The integration method was almost the same as that of the integration of the booster synchrotron. We report here on the integration of the linac control system with emphasis on the upgrade of the VMEbus controllers and software involving the operating system Solaris 7 as the real-time OS.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
