arXivDaily arXiv每日学术速递 周一至周五更新
arXiv physics/0008169physics.acc-ph
收藏

散斑中子源RFQ的热致频移分析

Analysis of Thermally Induced Frequency Shift for the Spallation Neutron Source RFQ

S. Virostek, J. Staples

摘要:

美国劳伦斯伯克利国家实验室(LBNL)的散斑中子源(SNS)前端系统组正在开发一种射频四极子(RFID),用于在402.5 MHz的工作频率下将H束从65 keV加速到2.5 MeV。4节,3.7米长的涡轮机是一个4叶片结构,工作在6%的占空因数。腔壁由OFE铜制成,并带有GlidCop外层以增加机械强度。一组12个冷却通道在冷却腔壁的进料和控制独立于4个通道嵌入在叶片。ANSYS有限元模型已被开发来计算给定的RF热负荷和冷却水温度的腔体的变形形状。通过将FEA结果与SUPERFISH RF腔模拟相结合,可以预测给定冷却剂温度或热负荷变化时的相对频率偏移。计算出的空腔频率灵敏度为-33 kHz每1摄氏度的变化,在恒温壁水的叶片水温。还使用前述FEA模型研究了系统启动瞬态。通过控制RF功率斜坡率以及独立壁和叶片冷却回路温度,可以最小化系统开启时间,同时限制频率偏移。

英文摘要:

The Spallation Neutron Source (SNS) Front-End Systems Group at Lawrence Berkeley National Lab (LBNL) is developing a Radio Frequency Quadrupole (RFQ) to accelerate an H- beam from 65 keV to 2.5 MeV at the operating frequency of 402.5 MHz. The 4 section, 3.7 meter long RFQ is a 4 vane structure operating at 6% duty factor. The cavity walls are made from OFE Copper with a GlidCop outer layer to add mechanical strength. A set of 12 cooling channels in the RFQ cavity walls are fed and controlled separately from 4 channels embedded in the vanes. An ANSYS finite-element model has been developed to calculate the deformed shape of the cavity for given RF heat loads and cooling water temperatures. By combining the FEA results with a SUPERFISH RF cavity simulation, the relative shift in frequency for a given change in coolant temperature or heat load can be predicted. The calculated cavity frequency sensitivity is -33 kHz per 1 degC change in vane water temperature with constant-temperature wall water. The system start-up transient was also studied using the previously mentioned FEA model. By controlling the RF power ramp rate and the independent wall and vane cooling circuit temperatures, the system turn-on time can be minimized while limiting the frequency shift.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑