We develop tests of the hypothesis of no effect for selected predictors in regression, without assuming a model for the conditional distribution of the response given the predictors. Predictor effects need not be limited to the mean function and smoothing is not required. The general approach is based on sufficient dimension reduction, the idea being to replace the predictor vector with a lower-dimensional version without loss of information on the regression. Methodology using sliced inverse regression is developed in detail.
Most data sets comprise of measurements on continuous and categorical variables. In regression and classification Statistics literature, modeling high-dimensional mixed predictors has received limited attention. In this paper we study the general regression problem of inferring on a variable of interest based on high dimensional mixed continuous and binary predictors. The aim is to find a lower dimensional function of the mixed predictor vector that contains all the modeling information in the mixed predictors for the response, which can be either continuous or categorical. The approach we pro…
We study the asymptotic behavior of a class of methods for sufficient dimension reduction in high-dimension regressions, as the sample size and number of predictors grow in various alignments. It is demonstrated that these methods are consistent in a variety of settings, particularly in abundant regressions where most predictors contribute some information on the response, and oracle rates are possible. Simulation results are presented to support the theoretical conclusion.
The dual problem of testing the predictive significance of a particular covariate, and identification of the set of relevant covariates is common in applied research and methodological investigations. To study this problem in the context of functional linear regression models with predictor variables observed over a grid and a scalar response, we consider basis expansions of the functional covariates and apply the likelihood ratio test. Based on p-values from testing each predictor, we propose a new variable selection method, which is consistent in selecting the relevant predictors from set of…
We introduce new nonparametric predictors for homogeneous pooled data in the context of group testing for rare abnormalities and show that they achieve optimal rates of convergence. In particular, when the level of pooling is moderate, then despite the cost savings, the method enjoys the same convergence rate as in the case of no pooling. In the setting of "over-pooling" the convergence rate differs from that of an optimal estimator by no more than a logarithmic factor. Our approach improves on the random-pooling nonparametric predictor, which is currently the only nonparametric method availab…
Sufficient dimension reduction (SDR) in regression, which reduces the dimension by replacing original predictors with a minimal set of their linear combinations without loss of information, is very helpful when the number of predictors is large. The standard SDR methods suffer because the estimated linear combinations usually consist of all original predictors, making it difficult to interpret. In this paper, we propose a unified method - coordinate-independent sparse estimation (CISE) - that can simultaneously achieve sparse sufficient dimension reduction and screen out irrelevant and redunda…
We consider forecasting a single time series using a large number of predictors in the presence of a possible nonlinear forecast function. Assuming that the predictors affect the response through the latent factors, we propose to first conduct factor analysis and then apply sufficient dimension reduction on the estimated factors, to derive the reduced data for subsequent forecasting. Using directional regression and the inverse third-moment method in the stage of sufficient dimension reduction, the proposed methods can capture the non-monotone effect of factors on the response. We also allow a…
We consider a linear regression model and propose an omnibus test to simultaneously check the assumption of independence between the error and the predictor variables, and the goodness-of-fit of the parametric model. Our approach is based on testing for independence between the residual obtained from the parametric fit and the predictor using the Hilbert--Schmidt independence criterion (Gretton et al. (2008)). The proposed method requires no user-defined regularization, is simple to compute, based merely on pairwise distances between points in the sample, and is consistent against all alternat…
University of Washington（华盛顿大学）；Microsoft Research（微软研究院）
We study the new feature utility prediction problem: statistically testing whether adding a new feature to the data representation can improve predictive accuracy on a supervised learning task. In many applications, identifying new informative features is the primary pathway for improving performance. However, evaluating every potential feature by re-training the predictor with it can be costly. The paper describes an efficient, learner-independent technique for estimating new feature utility without re-training based on the current predictor's outputs. The method is obtained by deriving a con…
The determination of an optimal design for a given regression problem is an intricate optimization problem, especially for models with multivariate predictors. Design admissibility and invariance are main tools to reduce the complexity of the optimization problem and have been successfully applied for models with univariate predictors. In particular several authors have developed sufficient conditions for the existence of saturated designs in univariate models, where the number of support points of the optimal design equals the number of parameters. These results generalize the celebrated de l…
Conditional Variance Estimation (CVE) is a novel sufficient dimension reduction (SDR) method for additive error regressions with continuous predictors and link function. It operates under the assumption that the predictors can be replaced by a lower dimensional projection without loss of information. In contrast to the majority of moment based sufficient dimension reduction methods, Conditional Variance Estimation is fully data driven, does not require the restrictive linearity and constant variance conditions, and is not based on inverse regression. CVE is shown to be consistent and its objec…
Sufficient dimension reduction methods often require stringent conditions on the joint distribution of the predictor, or, when such conditions are not satisfied, rely on marginal transformation or reweighting to fulfill them approximately. For example, a typical dimension reduction method would require the predictor to have elliptical or even multivariate normal distribution. In this paper, we reformulate the commonly used dimension reduction methods, via the notion of "central solution space," so as to circumvent the requirements of such strong assumptions, while at the same time preserve the…
Model-X approaches to testing conditional independence between a predictor and an outcome variable given a vector of covariates usually assume exact knowledge of the conditional distribution of the predictor given the covariates. Nevertheless, model-X methodologies are often deployed with this conditional distribution learned in sample. We investigate the consequences of this choice through the lens of the distilled conditional randomization test (dCRT). We find that Type-I error control is still possible, but only if the mean of the outcome variable given the covariates is estimated well enou…
In this paper, we consider regression models with a Hilbert-space-valued predictor and a scalar response, where the response depends on the predictor only through a finite number of projections. The linear subspace spanned by these projections is called the effective dimension reduction (EDR) space. To determine the dimensionality of the EDR space, we focus on the leading principal component scores of the predictor, and propose two sequential $χ^2$ testing procedures under the assumption that the predictor has an elliptically contoured distribution. We further extend these procedures and intro…
This paper examines the problem of nonparametric testing for the no-effect of a random covariate (or predictor) on a functional response. This means testing whether the conditional expectation of the response given the covariate is almost surely zero or not, without imposing any model relating response and covariate. The covariate could be univariate, multivariate or functional. Our test statistic is a quadratic form involving univariate nearest neighbor smoothing and the asymptotic critical values are given by the standard normal law. When the covariate is multidimensional or functional, a pr…
We consider forecasting a single time series when there is a large number of predictors and a possible nonlinear effect. The dimensionality was first reduced via a high-dimensional (approximate) factor model implemented by the principal component analysis. Using the extracted factors, we develop a novel forecasting method called the sufficient forecasting, which provides a set of sufficient predictive indices, inferred from high-dimensional predictors, to deliver additional predictive power. The projected principal component analysis will be employed to enhance the accuracy of inferred factors…
We in this paper consider Fréchet sufficient dimension reduction with responses being complex random objects in a metric space and high dimension Euclidean predictors. We propose a novel approach called weighted inverse regression ensemble method for linear Fréchet sufficient dimension reduction. The method is further generalized as a new operator defined on reproducing kernel Hilbert spaces for nonlinear Fréchet sufficient dimension reduction. We provide theoretical guarantees for the new method via asymptotic analysis. Intensive simulation studies verify the performance of our proposals. And…
In applications involving ordinal predictors, common approaches to reduce dimensionality are either extensions of unsupervised techniques such as principal component analysis, or variable selection procedures that rely on modeling the regression function. In this paper, a supervised dimension reduction method tailored to ordered categorical predictors is introduced. It uses a model-based dimension reduction approach, inspired by extending sufficient dimension reductions to the context of latent Gaussian variables. The reduction is chosen without modeling the response as a function of the predi…
This paper develops a new approach to post-selection inference for screening high-dimensional predictors of survival outcomes. Post-selection inference for right-censored outcome data has been investigated in the literature, but much remains to be done to make the methods both reliable and computationally-scalable in high-dimensions. Machine learning tools are commonly used to provide {\it predictions} of survival outcomes, but the estimated effect of a selected predictor suffers from confirmation bias unless the selection is taken into account. The new approach involves construction of semi-p…
We consider parameter estimation, hypothesis testing and variable selection for partially time-varying coefficient models. Our asymptotic theory has the useful feature that it can allow dependent, nonstationary error and covariate processes. With a two-stage method, the parametric component can be estimated with a $n^{1/2}$-convergence rate. A simulation-assisted hypothesis testing procedure is proposed for testing significance and parameter constancy. We further propose an information criterion that can consistently select the true set of significant predictors. Our method is applied to autor…
We provide necessary and sufficient conditions of uniform consistency of nonparametric sets of alternatives of chi-squared test for testing of hypothesis of homogeneity. The number of cells of chi-squared test increases with sample size growth. Nonparametric sets of alternatives can be defined both in terms of densities and distribution functions.
We consider the problem of testing significance of predictors in multivariate nonparametric quantile regression. A stochastic process is proposed, which is based on a comparison of the responses with a nonparametric quantile regression estimate under the null hypothesis. It is demonstrated that under the null hypothesis this process converges weakly to a centered Gaussian process and the asymptotic properties of the test under fixed and local alternatives are also discussed. In particular we show, that - in contrast to the nonparametric approach based on estimation of $L^2$-distances - the new…
We consider a quadratic functional regression model in which a scalar response depends on a functional predictor; the common functional linear model is a special case. We wish to test the significance of the nonlinear term in the model. We develop a testing method which is based on projecting the observations onto a suitably chosen finite dimensional space using functional principal component analysis. The asymptotic behavior of our testing procedure is established. A simulation study shows that the testing procedure has good size and power with finite sample sizes. We then apply our test to a…
In the sparse linear regression setting, we consider testing the significance of the predictor variable that enters the current lasso model, in the sequence of models visited along the lasso solution path. We propose a simple test statistic based on lasso fitted values, called the covariance test statistic, and show that when the true model is linear, this statistic has an $\operatorname {Exp}(1)$ asymptotic distribution under the null hypothesis (the null being that all truly active variables are contained in the current lasso model). Our proof of this result for the special case of the first…
Testing procedures for predictive regressions with lagged autoregressive variables imply a suboptimal inference in presence of small violations of ideal assumptions. We propose a novel testing framework resistant to such violations, which is consistent with nearly integrated regressors and applicable to multi-predictor settings, when the data may only approximately follow a predictive regression model. The Monte Carlo evidence demonstrates large improvements of our approach, while the empirical analysis produces a strong robust evidence of market return predictability hidden by anomalous obser…
The gamma model is a generalized linear model for gamma-distributed outcomes. The model is widely applied in psychology, ecology or medicine. In this paper we focus on gamma models having a linear predictor without intercept. For a specific scenario sets of locally D- and A-optimal designs are to be developed. Recently, Gaffke et al. (2018) established a complete class and an essentially complete class of designs for gamma models to obtain locally D-optimal designs. However to extend this approach to gamma model without an intercept term is complicated. To solve that further techniques have to…
We study the problem of testing composite hypotheses versus composite alternatives, using a convex duality approach. In contrast to classical results obtained by Krafft and Witting (Z. Wahrsch. Verw. Gebiete 7 (1967) 289--302), where sufficient optimality conditions are derived via Lagrange duality, we obtain necessary and sufficient optimality conditions via Fenchel duality under compactness assumptions. This approach also differs from the methodology developed in Cvitanić and Karatzas (Bernoulli 7 (2001) 79--97).
For testing conditional independence (CI) of a response Y and a predictor X given covariates Z, the recently introduced model-X (MX) framework has been the subject of active methodological research, especially in the context of MX knockoffs and their successful application to genome-wide association studies. In this paper, we study the power of MX CI tests, yielding quantitative insights into the role of machine learning and providing evidence in favor of using likelihood-based statistics in practice. Focusing on the conditional randomization test (CRT), we find that its conditional mode of in…
