面向动作捕捉纺织品:通过导电织物总线供电与联网的无电池IMU阵列
Toward Motion Capture Textiles: A Batteryless IMU Array Powered and Networked Through a Conductive-Fabric Bus
AI总结:
该研究提出一种基于导电织物总线供电联网的无电池IMU阵列动作捕捉平台,结合令牌传递协议实现50Hz稳定数据采集,通过埃尔米特样条插值完成柔性物体三维重建,在准静态工况下验证了2.60mm RMS的重建精度,为动态动作捕捉纺织品研究奠定基础。
摘要:
动作捕捉在医疗、康复及体育应用中愈发重要,但传统基于视觉的系统需要相机基础设施和视线条件,限制了其在日常环境中的使用。本文提出一种与位置无关的动作捕捉平台,基于IMU(惯性测量单元)传感器节点阵列,该阵列无单独布线或机载电池,通过导电织物实现二维通信与供电。每个传感器节点的流水线处理结合令牌传递协议,可实现50Hz下无冲突且稳定的数据采集。通过对网格对齐IMU的方向数据应用埃尔米特样条插值,进一步实现柔性物体的实时三维重建。针对已知半径的圆柱,在阵列225mm跨度上,重建表面的均方根偏差为2.60mm。该重建针对准静态工况设计,本研究在该工况下对其进行了实验验证。本工作实现的硬件平台与通信协议,为动态动作捕捉纺织品的进一步研究提供了支持。
英文摘要:
Motion capture is increasingly important in healthcare, rehabilitation, and sports applications. However, conventional vision-based systems require camera infrastructure and line-of-sight conditions, limiting their use in daily environments. This paper proposes a location-independent platform for motion capture, based on an array of IMU (inertial measurement unit) sensor nodes without individual wiring or onboard batteries, enabled by two-dimensional communication and power delivery over conductive fabric. Pipeline processing in each sensor node, combined with a token-passing protocol, enables collision-free and stable data acquisition at 50 Hz. Real-time three-dimensional reconstruction of flexible objects is further demonstrated by applying Hermite spline interpolation to orientation data from grid-aligned IMUs. Against a cylinder of known radius, the reconstructed surface deviates by 2.60 mm RMS over the 225 mm span of the array. The reconstruction is formulated for the quasi-static regime, and this letter empirically validates it in that regime. The hardware platform and communication protocol implemented in this work enable further investigation toward dynamic motion capture textiles.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。