用于微通道热沉热工水力预测的通用两层模型
Versatile two-layer model for thermohydraulic prediction of microchannel heat sinks
AI总结:
本研究开发的通用两层模型(VTLM)将微通道热沉热工水力预测的三维问题简化为耦合二维场,经多工况评估精度优于现有模型,可用于各类微通道热沉的降维分析。
摘要:
三维共轭传热模拟可为微通道热沉提供详细预测,但在评估大量几何结构和运行工况时计算量较大。本研究开发了通用两层模型(VTLM),将三维问题简化为两个耦合的二维场,同时保留流道和翅片的面内几何结构。通过水力和热闭合关系纳入未解析的通道高度方向相关效应,这些闭合关系考虑了壁面摩擦以及流体侧和翅片侧对层间传热的贡献。闭合关系由代表性通道几何结构、流动发展状态和翅片构型确定。在宽范围的通道纵横比和运行工况(包括均匀和非均匀翅片布置)下,将VTLM与三维参考模型进行了评估。与现有两层模型相比,VTLM与三维参考结果的整体一致性得到提升。结果表明,预测精度主要由流动发展状态和通道纵横比决定,据此为所研究的直通道构型提出了保守筛选准则。对翅片式扩张-收缩通道的评估进一步支持了VTLM适用于具有突然宽度变化的所研究流道。总体而言,VTLM为热工水力分析提供了降维框架,可应用于本研究中考察的各类微通道热沉构型,无需明确解析通道高度方向。
英文摘要:
Three-dimensional conjugate heat-transfer simulations provide detailed predictions for microchannel heat sinks but can be computationally demanding when many geometries and operating conditions are evaluated. This study develops a versatile two-layer model (VTLM) that reduces the three-dimensional problem to two coupled two-dimensional fields while retaining the in-plane geometry of the flow passages and fins. Effects associated with the unresolved channel-height direction are incorporated through hydraulic and thermal closures that account for wall friction and the fluid- and fin-side contributions to interlayer heat transfer. The closures are evaluated from the representative channel geometry, flow-development condition, and fin configuration. The VTLM was assessed against three-dimensional reference models across broad ranges of channel aspect ratios and operating conditions, including uniform and nonuniform fin arrangements. Compared with the existing two-layer models, the VTLM showed improved overall agreement with the three-dimensional reference results. The results showed that prediction accuracy was governed mainly by the flow-development condition and channel aspect ratio, from which a conservative screening guideline was proposed for the examined straight-channel configurations. The assessment of finned expansion--contraction channels further supported the applicability of the VTLM to the investigated passages with abrupt width changes. Overall, the VTLM provides a reduced-dimensional framework for thermohydraulic analysis across the range of microchannel heat-sink configurations examined in this study without explicitly resolving the channel-height direction.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。