AI 中文总结
该研究提出一款Sub-6G混频器优先型RXFE，通过设计方法缓解本振重叠引发的输入匹配与NF恶化，采用TSMC 65 nm CMOS工艺实现，在1-5.6 GHz频段实现了-10 dB以下S11、1.08 dB NF恶化及低功耗性能。
AI 中文摘要
本研究提出一款针对Sub-6 GHz应用优化的混频器优先型接收机前端（RXFE），其本振（LO）脉冲重叠已被最小化。研究提出一种设计方法，用于缓解本振重叠引发的输入匹配与噪声系数（NF）恶化问题，该方法采用基于电流模式逻辑（CML）的本振发生器验证。该RXFE采用台积电（TSMC）65 nm CMOS工艺实现，在1-5.6 GHz频率范围内，输入回波损耗（S11）低于-10 dB，噪声系数恶化值为1.08 dB，从1.2 V电源消耗的电流不超过12.19 mA，其有效布局面积为302 μm × 209 μm。
英文摘要
This work presents a mixer-first receiver front-end (RXFE) optimized for sub-6 GHz applications with minimized local oscillator (LO) pulse overlap. A design methodology is proposed to mitigate LO overlap-induced degradation in input matching and noise figure (NF), validated using a current-mode logic (CML)-based LO generator. Implemented in TSMC 65-nm CMOS, the RXFE achieves an input return loss (S11) below -10 dB, an NF degradation of 1.08 dB, and consumes no more than 12.19 mA from a 1.2 V supply across the 1-5.6 GHz frequency range. The proposed RXFE occupies an active layout area of 302 um x 209 um.
CommentsThe withdrawal is being done due to a conflict with the advisor of the work. The work shall be resubmitted once the conflicts are resolved
