arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2607.01533physics.flu-dyn
收藏

双转子围栏中流体动力学自旋耦合的二维模拟

Two-dimensional simulations of hydrodynamic spin coupling in a two-rotor corral

University of Houston(休斯顿大学)

Tsorng-Whay Pan, Jiwen He

AI总结:

通过二维不可压缩粘性流体的DNS,研究双转子围栏中的流体动力学自旋耦合,揭示齿轮比与雷诺数的相图,并比较平面模型与实验的差异。

摘要:

我们使用二维不可压缩粘性流体流动的DNS研究双转子围栏中的流体动力学自旋耦合。一个主动转子以角速度W驱动,附近一个无扭矩的被动转子通过流体动力学扭矩平衡选择角速度w。有符号齿轮比Gamma=w/W区分同向旋转和反向旋转,雷诺数Re=|Omega|r^2/\nu。受近期准二维实验启发,我们使用DLM/FD方法计算围栏尺寸C=3、4.5和6时$\Gamma(G,Re)$的平面相图。平面模型在Re=20时恢复了基准间隙路径:一个中间反向旋转带,一个宽间隙过渡到同向旋转,齿轮比量级为10^{-2},以及观察到的涡旋附着、脱离和合并序列。它还产生了一个类似重入的间隙结构,带有一个小间隙同向旋转区域,该区域与实验近距离几何状态的关系尚未解决。主要差异在于高Re边界。在实验中间间隙横断面G约0.3处,平面齿轮比从反向旋转侧趋近于零,但未在Re=400处穿越;相比之下,在较窄间隙G=0.22处,平面终端自旋在Re=44附近反转。壁面牵引诊断显示,这种穿越不是实验的剪切竞争机制:面向间隙的反向旋转弧变窄,但未像实验中那样塌缩或偏转,并且G=0.22处的反转是通过积分平面扭矩的重新分布发生的。因此,严格的平面模型捕捉了宽间隙路径架构和雷诺驱动的自旋边界的存在,但在间隙中移动了该边界并改变了其表面应力机制。剩余的差异表明有限深度二次运动、端壁应力和装置几何形状是实验剪切平衡的可能贡献因素。

英文摘要:

We study hydrodynamic spin coupling in a two-rotor corral using DNS of 2D incompressible viscous fluid flow. An active rotor is driven at angular velocity W, and a nearby torque-free passive rotor selects an angular velocity w through hydrodynamic torque balance. The signed gear ratio Gamma=w/W distinguishes corotation from counterrotation, with Reynolds number Re=|Ω|r^2/ν. Motivated by a recent quasi-two-dimensional experiment, we use a DLM/FD method to compute planar phase diagrams of $Γ(G,Re)$ at corral sizes C=3, 4.5, and 6. The planar model recovers the benchmark gap route at Re=20: an intermediate counterrotation band, a wide-gap transition to corotation, gear-ratio magnitudes of order 10^{-2}, and the observed sequence of vortex attachment, detachment, and merger. It also produces a reentrant-like gap structure with a small-gap corotation region whose relation to the experimental close-range geometric state remains unresolved. The main discrepancy is the high-Re boundary. At the experimental mid-gap transect G about 0.3, the planar gear ratio approaches zero from the counterrotating side but does not cross through Re=400; at the narrower gap G=0.22, by contrast, the planar terminal spin reverses near Re=44. Wall-traction diagnostics show that this crossing is not the experimental shear-competition mechanism: the gap-facing counterrotating arc narrows but does not collapse or deflect as in the experiment, and the reversal at G=0.22 occurs by redistribution of the integrated planar torque. The strictly planar model therefore captures the broad gap-route architecture and the existence of a Reynolds-driven spin boundary, but displaces that boundary in gap and alters its surface-stress mechanism. The remaining mismatch points to finite-depth secondary motion, end-wall stresses, and apparatus geometry as plausible contributors to the experimental shear balance.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑