arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2606.27892cs.ARcs.ETcs.NE
收藏

面向柔性电子低功耗函数逼近的模拟Kolmogorov-Arnold网络协同优化

Co-Optimization of Analog Kolmogorov-Arnold Networks for Low-Power Function Approximation in Flexible Electronics

Karlsruhe Institute of Technology(卡尔斯鲁厄理工学院);National Technical University of Athens(雅典国立技术大学);Radyalis LLC(Radyalis有限责任公司)

Paula Carolina Lozano Duarte, Georgios Zervakis, Mehdi Tahoori, Sani Nassif

AI总结:

提出模拟Kolmogorov-Arnold网络(AKAN),通过硬件-软件协同优化和剪枝方法,在硬件缺陷下精确逼近复杂多元函数,实现高达55%面积和50%功耗节省。

摘要:

可穿戴设备和物联网传感器需要对生物信号和环境数据进行片上处理,包括计算密集的操作,如神经网络推理的非线性激活函数、将原始读数映射到物理单位的传感器校准曲线,以及用于特征提取的对数压缩和幂运算等信号预处理函数。这些函数表现出显著的复杂性,通常涉及超越运算和多元依赖关系,在数字域实现成本高昂。模拟函数逼近通过在模拟域执行这些计算提供了一种低功耗替代方案,从而降低了与模数转换及后续数字处理相关的能量开销。柔性电子因其机械灵活性和低成本制造成为可穿戴应用的极具吸引力的平台,但对电路密度和功耗施加了严格限制,使得高效的模拟实现至关重要但具有挑战性。本文通过硬件-软件协同优化引入模拟Kolmogorov-Arnold网络(AKAN),以在硬件缺陷下精确逼近这些复杂的多元函数。我们的方法在训练过程中融入电路级误差建模,并在软件和硬件层面应用剪枝以减少面积和功耗。跨多个基准的验证表明,我们提出的剪枝方法不仅降低了硬件成本,还能通过正则化样条参数提高逼近精度。结果显示,面积和功耗分别节省高达55%和50%,各数据集平均降低近30%,突显了AKAN作为柔性电子中低功耗模拟函数逼近的鲁棒且可泛化的框架。

英文摘要:

Wearable devices and Internet of Things (IoT) sensors require on-sensor processing of biosignals and environmental data, including computationally demanding operations such as nonlinear activation functions for neural network inference, sensor calibration curves to map raw readings to physical units, and signal preprocessing functions like logarithmic compression and power operations for feature extraction. These functions exhibit significant complexity, often involving transcendental operations and multivariate dependencies that are costly to implement digitally. Analog function approximation provides a power-efficient alternative by performing these computations in the analog domain, thereby reducing the energy overhead associated with analog-to-digital conversion and subsequent digital processing. Flexible Electronics (FE) present a particularly attractive platform for wearable applications due to mechanical flexibility and low-cost fabrication, but impose strict constraints on circuit density and power consumption, making efficient analog implementations critical but challenging. This work introduces Analog Kolmogorov-Arnold Networks (AKANs), developed via hardware-software co-optimization, to approximate these complex multivariate functions accurately under hardware imperfections. Our method incorporates circuit-level error modeling during training and applies pruning at both software and hardware levels to reduce area and power. Validation across multiple benchmarks demonstrates that our proposed pruning methodology not only reduces hardware cost but can also improve approximation accuracy by regularizing spline parameters. Results show up to 55% area and 50% power savings, with average reductions of nearly 30% across datasets, highlighting AKANs as a robust and generalizable framework for low-power analog function approximation in FE.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑