arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2605.18545physics.opticseess.IV
收藏

利用数字孪生优化干涉投影轮廓仪

Using a Digital Twin for Fringe Projection Profilometry Optimisation

University of Nottingham(诺丁汉大学)

D. Weston, X. Kong, G. S. D. Gordon, S. Piano

AI总结:

本文提出一种基于数字孪生的自动化框架,用于优化干涉投影轮廓仪的参数配置,通过模拟真实系统环境,提高了测量精度和效率。

摘要:

干涉投影轮廓仪(FPP)是一种广泛用于测量物体表面形貌和三维几何的常用技术,当与合适的相机和投影仪配合使用时,可以提供高精度和高分辨率的测量。然而,在实际部署中,识别在满足现实约束条件下最大化精度的参数配置仍然具有挑战性。为了解决这一问题,我们提出了一种在Blender中实现的自动化数字孪生框架,Blender是一个开源的3D软件包,提供了一个光线追踪渲染环境,能够准确模拟物理系统。我们通过匹配表征质量、伽马响应和表征图像来在数字孪生中复制物理设置。使用Zhang的方法[1]获得内在和外在参数以实现高精度的准确系统表征已被证明是关键。利用这个数字孪生,我们展示了对关键参数的系统探索和优化,包括相位移计数、相机-投影仪间距和条纹密度。这些参数涵盖系统几何(例如相机-投影仪位置)和算法选择,如二维相位移和解包裹方法[2]。三种测量伪影,代表现实世界计量场景,被用来评估系统。计算地面真相和重建网格之间的对称平均棱角距离(SMCD)用于评估重建质量。在数字孪生中优化后,将最优参数转移到物理系统中,将每测量所需的图像数量减少了48%(从36到21)。对于干涉图案条纹计数的改变,平均SMCD减少了74.0%。仅在数字孪生中调整相机和投影仪间距,获得了36.9%的平均SMCD。

英文摘要:

Fringe projection profilometry (FPP) is a widely used technique for measuring object surface form and three-dimensional (3D) geometry, capable of delivering high-precision, high-resolution measurements when paired with suitable cameras and projectors. However, in practical deployments, identifying parameter configurations that maximise precision while satisfying real-world constraints remains challenging. To address this, we present an automated digital twin framework implemented in Blender, an open-source 3D software package that provides a ray-traced rendering environment that enables accurate simulation of physical systems. We replicated the physical setup in our digital twin by matching characterisation quality, gamma response, and characterisation images. Accurate system characterisation using Zhang's method [1], to obtain intrinsic and extrinsic parameters, is shown to be critical for achieving high precision. Using this digital twin, we then demonstrate systematic exploration and optimisation of key parameters, including phase-shift count, camera-projector spacing, and fringe density. These parameters span both system geometry (e.g. camera-projector positioning) and algorithmic choices, such as 2D phase-shifting and unwrapping methods [2]. Three measurement artefacts, representative of real world metrology scenarios, were used to benchmark the system. The symmetrical mean Chamfer distance (SMCD), computed between ground-truth and reconstructed meshes, was used to evaluate reconstruction quality. After optimisation within the digital twin, transferring the optimal parameters to the physical system reduced the number of required images per measurement by 48% (from 36 to 21). A reduction of 74.0% mean SMCD was also achieved for fringe pattern stripe count alteration. A 36.9% mean SMCD was obtained for adjusting the camera and projector spacing purely in the digital-twin.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑