通过移位寄存器多路复用实现高吞吐量的可扩展传感器读取用于灵巧机械手
High-Speed, Scalable Sensor Readout for Dexterous Robotic Hands via Shift-Register Multiplexing
AI总结:
本文提出一种基于串入并出移位寄存器原理的可扩展模拟传感器读取架构,支持异构模拟输出传感器的集成与扩展,实现高吞吐量的传感器数据采集,验证了其在机械手上的应用效果。
摘要:
灵巧机械手需要在多个自由度上实现高速多模态传感,但现有读取架构常在传感器数量、布线复杂性和采样带宽之间做出取舍。本文提出了一种基于串入并出(SIPO)移位寄存器原理的可扩展模拟传感器读取架构。该架构支持异构模拟输出传感器的灵活集成,通过仅使用三条信号线即可实现可扩展性,并提供快速且可配置的采样。我们在一个由16个关节传感器模块和一个四通道触觉传感器模块组成的腱驱动机械手中验证了该方法,实现了20个传感器通道在1 kHz全扫描率下的数据采集,稳定运行至1.5 kHz。关节传感器的特性分析显示最大斜率绝对百分比误差(APE)为0.446%,以及亚度估计误差,表明所提出的读取系统不显著降低传感性能。对于触觉传感,基于LSTM的模型在力估计中实现了RMSE为0.125 N,在五类接触位置分类中达到了93.4%的准确率,并在1 kHz下部署了实时推理。系统层面的实验表明,关节传感器在交互过程中提供的反馈比电机估计更准确,而触觉传感器能够实现接触时的响应力估计。所提出的架构为实现完全传感器化的灵巧机械手提供了实用路径。
英文摘要:
Dexterous robotic hands require high-speed multimodal sensing across many degrees of freedom, yet existing readout architectures often impose trade-offs between sensor count, wiring complexity, and sampling bandwidth. This paper presents a scalable analog sensor readout architecture based on a serial-in parallel-out (SIPO) shift-register principle. The proposed architecture supports versatile integration of heterogeneous analog-output sensors, scalable expansion using only three signal lines between sensor modules, and fast, configurable sampling. We validate the approach on a tendon-driven robotic hand integrating 16 joint sensor modules and one four-channel tactile sensor module, enabling acquisition of 20 sensor channels at a full-scan rate of 1 kHz, with stable operation up to 1.5 kHz. Joint sensor characterization showed a maximum slope absolute percentage error (APE) of 0.446% and sub-degree estimation error, indicating that the proposed readout system preserves sensing performance. For tactile sensing, LSTM-based models enabled real-time force estimation and contact-location classification at 1 kHz. System-level experiments showed that the joint sensors provided more accurate feedback than motor-based estimation during interaction. Closed-loop experiments further demonstrated improved joint trajectory tracking using joint-sensor feedback and force-controlled object pinching using tactile feedback. The proposed architecture offers a practical path toward sensorized robotic hands for dexterous manipulation.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。