arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2604.17993physics.class-ph
收藏

弹性杆在零合力横向载荷下的奇特力学行为

The strange mechanics of an elastic rod under null-resultant transverse loads

University of Trento(特伦托大学)

Davide Bigoni, Diego Misseroni, Andrea Piccolroaz

AI总结:

研究揭示零合力横向载荷对弹性杆的影响,发现其与轴向载荷产生相同变形,且在压缩时引发 buckling 和非平凡后屈曲变形,理论预测通过数值模拟和实验验证。

摘要:

两个大小相等、方向相反的分布死载荷垂直作用于弹性杆的轴线,一个作用于外侧,一个作用于内侧,使得单位长度的合力均匀为零。在此配置下,杆体受到横向(拉伸或压缩)应力,通常认为其对结构响应无显著影响。然而,渐进变形的弹性层和三种不同杆模型(第一种是弹性层的渐近近似,第二种基于欧拉弹性体,第三种基于离散模型的均质化)的渐近行为表明,这种加载条件使杆体产生与轴向载荷相同的变形。特别是,横向载荷在广义欧拉弹性体中与轴向载荷叠加,导致压缩时发生屈曲和非平凡后屈曲变形。临界横向应力的表达式与轴向力下的欧拉临界应力相同,并在杆体惯性趋于零时趋于零。因此,即使杆体厚度趋于零,横向加载引起的不稳定性仍持续存在。这些理论预测通过弹性层的数值模拟得到验证,显示增加的横向载荷可引发屈曲并使层沿与广义欧拉弹性体预测的变形路径一致,即使在自交后。为证明该行为可实际实现,开发了专用实验装置,实验结果完全验证了理论和数值预测。

英文摘要:

Two equal and opposite distributed dead loads are applied orthogonally to the axis of an elastic rod in its rectilinear reference configuration, one at the extrados and the other at the intrados, such that the resultant applied force per unit length is uniformly zero. In this configuration, the rod is subjected to a transverse (tensile or compressive) stress, which is usually believed to have no significant effect on the structural response and has therefore not been considered so far. Contrary to this common belief, the asymptotic behavior of an incrementally deformed elastic layer and three different rod models (the first derived as an asymptotic approximation of the elastic layer; the second based on Euler elastica; and the third obtained by homogenization of a discrete model) reveal that this loading condition produces the same deformation in the rod as an axial load. In particular, the transverse load adds to the axial load in a generalized version of the Euler elastica, leading to buckling and nontrivial postcritical deformations when compressive. The critical transverse stress for buckling is found to have the same form as the Euler critical stress under axial force and tends to zero in the limit of vanishing rod inertia. For this reason, instability induced by transverse loading persists even when the rod thickness tends to zero. These theoretical predictions are confirmed by numerical simulations of a slender elastic layer, which show that increasing transverse load can induce buckling and drive the layer along a deformation path that closely follows that predicted by the generalized Euler elastica throughout the entire postcritical regime, even beyond self-intersection. To show that this behavior can be realized in practice, a dedicated experimental setup is developed, and the experimental results fully confirm the theoretical and numerical predictions.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑