NOR型IGZO FeFET用于3D异构AI存储器的DTCO:以读取为中心的视角
DTCO of NOR-Type IGZO FeFETs for 3D Heterogeneous AI Memories: A Read-Centric Perspective
AI总结:
本文从以读取为中心的设计-技术协同优化(DTCO)角度,评估了NOR型IGZO FeFET在3D异构AI存储器中的可行性,涵盖了片上BEOL RAM、混合键合存储芯片以及片外单片集成3D FeNOR存储级存储器,并解决了写入挑战、读取裕度惩罚和3D堆叠密度限制等问题。
摘要:
由于最近在耐久性方面的进展,InGaZnO(IGZO)沟道FeFET引起了显著关注,为以读取为主的AI存储层级开辟了应用空间。本文从以读取为中心的设计-技术协同优化(DTCO)角度,评估了NOR型IGZO FeFET在3D异构AI存储器中的可行性,涵盖片上后道(BEOL)RAM和混合键合存储芯片,以及片外单片集成3D FeNOR存储级存储器(SCM)。对于片上BEOL RAM和存储芯片,我们展示了IGZO FeFET的跨节点位单元面积可扩展性,能够在7纳米设计规则下实现低至10个SRAM等效位单元面积(约0.016 μm²),同时保持低于5纳秒的随机访问延迟——尽管存在写入挑战。我们进一步识别了NOR FeFET阵列中由负编程态Vt相关的潜行电流引起的感应裕度惩罚,这需要正Vt工程以消除不必要的负电压读取抑制——例如,通过铁电层减薄。最后但同样重要的是,我们阐明了读取裕度对SCM的3D FeNOR的影响,其中3D堆叠密度受到来自相邻沟道分流的额外潜行电流的限制。
英文摘要:
InGaZnO (IGZO)-channel FeFETs have attracted notable interest thanks to recent advances in endurance, opening up their application space for read-dominated AI memory tiers. This work evaluates the viability of NOR-type IGZO FeFETs for 3D heterogeneous AI memories from a read-centric design-technology co-optimization (DTCO) perspective, spanning on-chip back-end-of-line (BEOL) RAMs and hybrid-bonded memory chiplets, and off-chip, monolithically integrated 3D FeNOR storage-class memories (SCMs). For on-chip BEOL RAMs and memory chiplets, we demonstrate the cross-node bitcell footprint scalability of IGZO FeFETs capable of delivering down to 10-A SRAM-equivalent bitcell area ($\sim$0.016 $μ$m$^2$) with 7-nm ground rules while maintaining a sub-5 ns random access latency -- despite their writability challenges. We further identify the sensing margin penalty in NOR FeFET arrays arising from sneak current associated with the negative program-state $V_t$, which requires positive-$V_t$ engineering in order to eliminate the unwanted negative voltage read inhibition -- for example, by ferroelectric layer thinning. Last but not least, we elucidate the read margin implications on 3D FeNOR for SCMs, with the 3D stacking density limited by additional sneak current from neighbor channel shunting.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。