arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2603.20835cond-mat.softcond-mat.mtrl-sci
收藏

对流预热增强DCPD前沿聚合前沿传播

Convective Preheating Enhances Front Propagation in DCPD Frontal Polymerization

Department of Mechanical Engineering, Indian Institute of Science(印度科学理工学院机械工程系)

M Vijay Kumar, Saujatya Mandal, Siddhant Jain, Saptarshi Basu, Debashish Das

AI总结:

研究揭示了触发方向和单体粘度对前沿速度的影响,发现低粘度下底部触发前沿传播更快,但随着粘度增加,前沿速度趋于一致,体现了对流到导热的转变。

摘要:

前沿聚合(FP)通过自维持热波实现热固性树脂的快速固化,但其传播机制会因加工条件而大幅变化。本文研究了触发方向和单体粘度(通过恒温时间控制)对DCPD前沿环开偶合聚合(FROMP)前沿速度的影响。实验发现,在低粘度下,底部触发的FP前沿传播显著更快,比顶部触发的快约50%,由增强的对流预热未反应单体前方驱动,对制造应用有重要意义。然而,随着恒温时间增加,单体粘度迅速上升,抑制对流并导致顶部和底部触发的前沿速度趋于一致。这种行为反映了FP过程中对流到导热(热扩散)的转变。互补模拟结合了由浮力驱动的对流,重现了观察到的趋势并突显了流体流动在前沿动态中的重要性。这些结果为FP中耦合的热-流-化学机制提供了新的见解,并提供了通过粘度和起始几何形状来调节前沿行为的策略。

英文摘要:

Frontal polymerization (FP) enables rapid curing of thermosets via a self-sustaining thermal wave, but its propagation mechanism can shift dramatically depending on processing conditions. In this study, we investigate the effect of trigger direction and monomer viscosity - controlled via hold time - on the front velocity in frontal ring-opening metathesis polymerization (FROMP) of dicyclopentadiene (DCPD). Our experiments reveal that at low viscosities, bottom-triggered FP fronts propagate significantly faster, ~50% faster front speed compared to top-triggered ones, driven by buoyancy-enhanced convection that preheats the unreacted monomer ahead of the front, that can have important implications for manufacturing applications. However, with increasing hold time, the monomer viscosity rises steeply, suppressing convection and causing the front velocity for top and bottom triggering to converge. This behavior reflects a convection-to-conduction (thermal-diffusion) transition in heat transport during FP. Complementary simulations incorporating buoyancy-driven advection reproduce the observed trends and highlight the importance of fluid flow in front dynamics. These results provide new insight into the coupled thermo-fluid-chemical mechanisms in FP offer strategies to tailor front behavior through viscosity and initiation geometry.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑