arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2603.09728cs.CE
收藏

一种正则化的集合卡尔曼滤波器用于脆性断裂的随机相场模型

A Regularized Ensemble Kalman Filter for Stochastic Phase Field Models of Brittle Fracture

TU Braunschweig(布伦瑞克工业大学);Chalmers University of Technology(查尔姆斯理工大学)

Lucas Hermann, Ralf Jänicke, Knut Andreas Meyer, Ulrich Römer

AI总结:

本文提出了一种基于正则化的集合卡尔曼滤波器,用于在随机相场模型中结合传感器数据更新脆性断裂的模型状态。

摘要:

相场方法用于脆性断裂提供了一个连续框架,用于建模裂纹起裂和传播,而无需显式表示离散裂纹表面,前提是空间离散化足够精细以解析正则化长度尺度。然而,由于材料缺陷导致的局部材料参数不确定性可能强烈影响模拟结果,如裂纹路径和剩余结构强度。同时,利用传感器持续监控结构的能力允许将建模预测与例如位移测量相结合。在本贡献中,我们连接这两个互补的信息源,并提出一种贝叶斯推断程序,允许用 incoming 传感器数据更新当前模型状态。我们为模型状态(包括位移和相场)构建一个贝叶斯先验,并采用集合卡尔曼滤波器(EnKF)进行更新。在 EnKF 中,更新是通过在每个集合成员上执行卡尔曼位移来计算的。由于标准 EnKF 可能产生违反常见建模假设的 assimilated 状态,我们提出了一种基于相场的正则化技术作为模型一致更新的近端步骤修正。1D 和 2D 数值示例展示了所提方法的性能和准确性,并显示更新的状态与真实情况合理匹配。与已应用于脆性断裂的传统贝叶斯反演技术不同,我们推断的不是模型参数,而是模型状态,即位移场和相场。尽管只有位移被观测到,但两个场之间的强相关性也允许推断后验相场。

英文摘要:

The phase-field approach to brittle fracture provides a continuum framework for modeling crack initiation and propagation without explicit representation of discrete crack surfaces, provided the spatial discretization is fine enough to resolve the regularization length scale. However, uncertain local material parameters due to material defects can strongly influence simulation results, such as crack paths and remaining structural strength. At the same time, the ability to continuously monitor structures using sensors allows complementing modeling predictions with, e.g., displacement measurements. In this contribution, we connect these two complementary sources of information and present a Bayesian inference procedure that allows updating the current model state with incoming sensor data. We construct a Bayesian prior for the model state (both displacements and phase-field) and employ an ensemble Kalman filter (EnKF) to perform the update. In the EnKF, the update is computed by performing a Kalman shift on each ensemble member. Since the standard EnKF may produce assimilated states that violate common modeling assumptions, we present a phase field-based regularization technique as a proximal step correction toward model-consistent updates. 1D and 2D numerical examples demonstrate the performance and accuracy of the proposed method and show that the updated state matches the ground truth reasonably well. Unlike traditional Bayesian inversion techniques, which have already been applied to brittle fracture, we infer not the model parameters but the model state, i.e., the displacement field and the phase-field. Although only displacements are observed, the strong correlation between both fields also allows inference of the posterior phase-field.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑