arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2603.05080physics.geo-ph
收藏

量化二氧化碳注入期间的盐沉淀:流速、温度和相态如何控制近井筒结晶

Quantifying Salt Precipitation During CO2 Injection: How Flow Rate, Temperature, and Phase State Control Near-Wellbore Crystallization

AGH University of Krakow(克拉科夫AGH科技大学);University of Oslo(奥斯陆大学);SINTEF Industry(辛特夫工业研究所)

Karol M. Dąbrowski, Mohammad Nooraiepour, Mohammad Masoudi

AI总结:

研究通过微流体实验量化了二氧化碳注入过程中盐沉淀的控制因素,揭示了流速、温度和相态对近井筒结晶的影响,为地质储存模型提供了关键基准。

摘要:

在注入井附近发生的盐沉淀可以降低渗透率,引起过量压力积累,并在几天到几周内减少注入性,但多相流、蒸发和结晶之间的孔隙尺度机制耦合需要进一步详细的量化,这需要在不同的相态和流动模式下进行。我们提出了高分辨率微流体实验,系统地量化了在二氧化碳驱动的盐水蒸发过程中,卤石结晶的动力学,涵盖了液态、气态和超临界相(50-80 bar,20--60 C,Pe = 50--1440)。结晶动力学由传输控制,其中Avrami速率常数(K)随着Peclet数增加两个数量级,并表现出Arrhenius温度的依赖性(Ea = 58.6 kJ/mol)。超临界二氧化碳实现了更高的置换效率(残余饱和度0.22-0.36,分形维度D = 1.79-1.82)和最快的蒸发(Sherwood数比液相高2-3倍),将成核时间从57分钟(20C,液相)减少到<1分钟(40-60C,气相/超临界)。最终晶体分数从液相(0.008)增加10倍到气相条件(0.08-0.12),证实了对流传输和相态主导于扩散限制机制。尽管存在概率成核,最终的晶体分布在空间上相对均匀,没有系统性的入口-出口偏差。这些关于无量纲参数(Pe,Sh)、动力学常数(K,Ea)和相依赖置换模式之间的定量关系为验证孔隙尺度模型和预测盐水和超盐二氧化碳地质储存近井筒渗透率损害提供了关键基准。

英文摘要:

Salt precipitation near injection wells can reduce permeability, induce excess pressure buildup, and reduce injectivity within days to weeks of CO2 injection, yet the pore-scale mechanisms coupling multiphase flow, evaporation, and crystallization warrant further detailed quantification across variable phase states and flow regimes. We present high-resolution microfluidic experiments that systematically quantify the dynamics of halite crystallization during CO2-driven brine evaporation across liquid, gaseous, and supercritical phases (50-80 bar, 20--60 C, Pe = 50--1440). Crystallization kinetics are controlled by transport, with the Avrami rate constant (K) increasing by two orders of magnitude with the Peclet number and exhibiting the dependence of the temperature of Arrhenius (Ea = 58.6 kJ/mol. Supercritical CO2 achieves superior displacement efficiency (residual saturation 0.22-0.36, fractal dimension D = 1.79-1.82) and the fastest evaporation (Sherwood numbers 2-3x higher than the liquid phase), reducing the nucleation time from 57 min (20C, liquid) to <1 min (40-60 C, gas/supercritical). The final fractions of crystal increase 10-fold from liquid (0.008) to gas-phase conditions (0.08--0.12), confirming that convective transport and phase state dominate over diffusion-limited mechanisms. Despite probabilistic nucleation, final crystal distributions are spatially rather uniform with no systematic inlet-outlet bias. These quantitative relationships between dimensionless parameters (Pe, Sh), kinetic constants (K, Ea) and phase-dependent displacement patterns provide critical benchmarks for validating pore-scale models and predicting near-wellbore permeability impairment in geological storage of saline and hypersaline CO2.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑