arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2602.20779physics.optics
收藏

闭环控制一体化3D纳米印刷电磁透镜扫描仪与集成霍尔传感器

Closed-loop control of a monolithically 3D nano-printed electromagnetic lens scanner with an integrated Hall sensor

University of Freiburg(弗莱堡大学)

Florian Lux, Elijah Ditchendorf, Çağlar Ataman

AI总结:

本文提出利用集成霍尔传感器的闭环控制方法,实现3D纳米印刷电磁透镜扫描仪的高精度定位,通过磁体与线圈的协同作用,消除迟滞和漂移,提升稳定性与重复性。

摘要:

通过双光子聚合进行的3D纳米印刷技术能够实现机械和自由成形微光学元件的单体制造,具有高内在对准精度。然而,光聚合物的粘弹性及温度依赖性刚度导致了迟滞和漂移,这显著降低了开环位置精度和准静态操作的长期稳定性。因此,对于3D纳米印刷光学微系统来说,集成位移传感的闭环控制对于实际精密定位应用至关重要。本文提出了一种闭环控制系统,用于此类透镜驱动器,利用商用三轴霍尔传感器进行位置跟踪。环绕集成微透镜的NdFeB微磁体不仅提供驱动力,还提供与位置相关的传感信号。霍尔传感器位于反霍尔兹样线圈对之间,该线圈对驱动扫描仪双向运动。霍尔传感器测量由微磁体和线圈对共同产生的总场。基于校准的减法分离线圈场和传感器偏移贡献,以恢复磁场并从而获得轴向磁位移。闭环操作在150微米位移范围内实现了平均绝对精度为0.86微米,精度为0.49微米,同时消除了粘弹性蠕变,抑制了迟滞,并在线圈自加热下最小化了温度引起的位移漂移。这种传感方法不需要额外的微加工步骤,为单体3D纳米印刷光学微系统的稳定和可重复定位提供了实际路径。

英文摘要:

3D nano-printing through two-photon polymerization enables monolithic manufacturing of mechanical and freeform micro-optical elements with high inherent alignment accuracy. However, viscoelasticity and temperature-dependent stiffness of the photopolymer lead to hysteresis and drift, which significantly degrade open-loop position accuracy and long-term stability in quasi-static operation. Therefore, closed-loop control with integrated displacement sensing is essential for 3D nano-printed optical microsystems in practical precision positioning applications. Here, we present a closed-loop control system for a such a lens actuator that uses a commercial 3-axis Hall sensor for position tracking. A NdFeB micromagnet encircling the integrated microlens provides both the actuation force and a position-dependent sensing signal. The Hall sensor, located between an anti-Helmholtz-like coil pair that drives the scanner bidirectionally, measures the combined field due to the micro-magnet and the coil pair. Calibration-based subtraction separates the coil field and sensor offset contributions to recover the magnet field and thus the axial magnet displacement. Closed-loop operation yields a mean absolute accuracy of 0.86 um and a precision of 0.49 um over a displacement range of 150 um while eliminating viscoelastic creep, suppressing hysteresis, and minimizing temperature-induced displacement drift under coil self-heating. This sensing approach requires no additional microfabrication steps and provides a practical path toward stable and repeatable positioning for monolithically 3D nano-printed optical microsystems.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑