arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2602.18330cs.RO
收藏

基于 snapping 结构的肌腱驱动的往复与非往复运动

Tendon-Driven Reciprocating and Non-Reciprocating Motion via Snapping Metabeams

Department of Functional Morphology and Biomechanics, Zoological Institute, Kiel University(功能形态与生物力学系,动物学研究所,基尔大学)

Mohsen Jafarpour, Ayberk Yüksek, Shahab Eshghi, Stanislav Gorb, Edoardo Milana

AI总结:

本研究提出了一种基于螺旋基 metabeams 的肌腱驱动机制,通过调整边界约束实现可控的 snapping 行为,应用于游泳机器人产生高效的非往复运动。

摘要:

snapping 束能够通过非线性不稳定性实现快速的几何转变,为软机器人系统提供了一种高效的运动生成方法。在本研究中,开发了一种由螺旋基 metabeams 组成的肌腱驱动机制,以利用这一原理产生往复和非往复运动。snapping 结构使用熔融沉积建模技术用聚乳酸(PLA)制造,并在不同的边界条件下进行实验测试以分析其非线性行为。结果表明,机械特性,包括临界力和稳定性,仅通过调整边界约束即可调节。螺旋几何结构即使在由相对刚性的材料如 PLA 制成时,也能实现大的可逆变形,提供了一种简单直接的设计概念以实现可控的 snapping 行为。开发的机制进一步集成到游泳机器人中,其中肌腱驱动的鳍表现出两种不同的驱动模式:往复和非往复运动。后者实现了高效的推进,产生约 32 毫米每 0.4 秒周期(约 81 毫米/秒,相当于每秒 0.4 个身体长度)的前进位移。本研究突显了几何驱动的 snapping 结构在软机器人系统中高效和可编程驱动的潜力。

英文摘要:

Snapping beams enable rapid geometric transitions through nonlinear instability, offering an efficient means of generating motion in soft robotic systems. In this study, a tendon-driven mechanism consisting of spiral-based metabeams was developed to exploit this principle for producing both reciprocating and non-reciprocating motion. The snapping structures were fabricated using fused deposition modeling with polylactic acid (PLA) and experimentally tested under different boundary conditions to analyze their nonlinear behavior. The results show that the mechanical characteristics, including critical forces and stability, can be tuned solely by adjusting the boundary constraints. The spiral geometry allows large reversible deformation even when made from a relatively stiff material such as PLA, providing a straightforward design concept for controllable snapping behavior. The developed mechanism was further integrated into a swimming robot, where tendon-driven fins exhibited two distinct actuation modes: reciprocating and non-reciprocating motion. The latter enabled efficient propulsion, producing a forward displacement of about 32 mm per 0.4 s cycle ($\approx$ 81 mm/s, equivalent to 0.4 body lengths per second). This study highlights the potential of geometry-driven snapping structures for efficient and programmable actuation in soft robotic systems.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑