arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2602.16119eess.SP
收藏

增材制造中振动与声学数据的原位分析

In-Situ Analysis of Vibration and Acoustic Data in Additive Manufacturing

Florida A&M University(佛罗里达农工大学)

Muhammad Fasih Waheed, Shonda Bernadin

AI总结:

本文通过加速度计和声学传感器对FDM打印机的振动和声音进行原位分析,研究振动在连续运动和折线运动中的特性,以提高3D打印的质量和稳定性。

摘要:

由错误扰动产生的振动会损害制造的部件,并降低FDM打印机的输出质量。对于运动机械而言,振动分析与控制至关重要。增材制造是3D打印的基础,它利用挤出机的机械运动来制造物体,由于不期望的振动而发生故障。因此,检查3D打印机的振动模式至关重要。在本工作中,我们观察了FDM打印机的这些参数,以MakerBot Method X为例。为了分析系统,必须了解它所生成的运动,并选择适当的传感器来检测这些运动。传感器的测量值可用于确定打印机的状况。我们使用加速度计和声学传感器来测量打印机产生的振动和声音。这些传感器的输出被分别检查。研究结果表明,在连续运动期间振动水平相对较低,因为振动主要出现在组件转换边缘。由于在折线运动中出现突然的加速和减速,振动达到峰值。

英文摘要:

Vibration from an erroneous disturbance harms the manufactured components and lowers the output quality of an FDM printer. For moving machinery, vibration analysis and control are crucial. Additive manufacturing is the basis of 3D printing, which utilizes mechanical movement of the extruder to fabricate objects, and faults occur due to unwanted vibrations. Therefore, it is vital to examine the vibration patterns of a 3D printer. In this work, we observe these parameters of an FDM printer, exemplified by the MakerBot Method X. To analyze the system, it is necessary to understand the motion it generates and select appropriate sensors to detect those motions. The sensor measurement values can be used to determine the condition of the printer. We used an accelerometer and an acoustic sensor to measure the vibration and sound produced by the printer. The outputs from these sensors were examined individually. The findings show that vibration occurs at relatively low levels during continuous motion because it mainly appears at component transition edges. Due to abrupt acceleration and deceleration during zigzag motion, vibration reaches its peak.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑