arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2602.15808eess.SP
收藏

基于几何驱动的RIS波束成形在工业环境中的测量验证

Measurement-Based Validation of Geometry-Driven RIS Beam Steering in Industrial Environments

Ruhr University Bochum(波鸿鲁尔大学);Fraunhofer Institute for Production Technology(弗劳恩霍夫生产技术研究所有)

Adam Umra, Simon Tewes, Niklas Beckmann, Niels König, Aydin Sezgin, Robert Schmitt

AI总结:

本文提出了一种新型RIS配置,通过测量验证几何驱动RIS波束成形在工业环境中的有效性,展示了其在空间场控制和定位中的应用潜力。

摘要:

可重构智能表面(RIS)为未来无线系统提供了可编程的无线电传播控制。在配置方面,几何驱动的分析方法因其简单性和实时操作而具有吸引力,但其在挑战性环境如密集多径和金属散射的工业大厅中的性能尚未得到充分验证。为此,我们使用5 GHz RIS原型在大型工业大厅中进行了基于测量的评估。提出了一种新型RIS配置,其中四个贴片天线紧密排列在RIS前方以引导入射场并实现受控反射。对于此设置,分析计算出的、量化配置被实施。从两个测量区域获得的二维接收功率图揭示了一致的、空间选择性的聚焦。优化接近接收器的配置产生清晰的功率峰值,而指向偏移位置则会引发快速20-30 dB的下降。随着RIS与接收器距离的增加,由于有限孔径和几何约束,仰角选择性扩大,而方位角成形保持稳健。这些结果证实了几何驱动的RIS波束成形在工业环境中的实际可行性,并支持其在非理想传播下的空间场控制和定位应用。

英文摘要:

Reconfigurable intelligent surfaces (RISs) offer programmable control of radio propagation for future wireless systems. For configuration, geometry-driven analytical approaches are appealing for their simplicity and real-time operation, but their performance in challenging environments such as industrial halls with dense multipath and metallic scattering is not well established. To this end, we present a measurement-based evaluation of geometry-driven RIS beam steering in a large industrial hall using a 5 GHz RIS prototype. A novel RIS configuration is proposed in which four patch antennas are mounted in close proximity in front of the RIS to steer the incident field and enable controlled reflection. For this setup, analytically computed, quantized configurations are implemented. Two-dimensional received power maps from two measurement areas reveal consistent, spatially selective focusing. Configurations optimized near the receiver produce clear power maxima, while steering to offset locations triggers a rapid 20-30 dB reduction. With increasing RIS-receiver distance, elevation selectivity broadens due to finite-aperture and geometric constraints, while azimuth steering remains robust. These results confirm the practical viability of geometry-driven RIS beam steering in industrial environments and support its use for spatial field control and localization under non-ideal propagation.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑