H4RG-10近红外探测器在高温环境下非线性特性:表征与数据驱动校正方法
Nonlinearity in H4RG-10 Near-Infrared Detectors at Elevated Temperatures: Characterization and Data-Driven Correction Method
AI总结:
本研究针对H4RG-10探测器在高温下的非线性特性,提出数据驱动校正方法以提高信号线性度,适用于未来暖操作场景的校准。
摘要:
我们报告了一种在中等升高温度条件下(114 K)新发现的H4RG-10近红外探测器非线性特性,这种特性可能源于与照明无关的缺陷电流,引入了传统校正模型无法捕捉的额外非线性。为解决此问题,我们提出了一种数据驱动的非线性校正(NLC)方法,利用双照明测量和暗曝光,对经典响应和缺陷电流的非线性行为进行建模。应用于PRIME望远镜上的H4RG-10探测器,该方法显著提高了信号线性度,特别是对于缺陷电流高的像素,同时在其他区域保持了可比性能。通过为每个像素选择最佳校正模型,实现了整个阵列的可靠NLC。本研究表征了H4RG-10探测器固有的非线性特性,并展示了数据驱动的后处理方法在存在大缺陷电流时可以有效恢复线性。尽管这些效应在正常工作温度下可能不显著,但该方法可能为未来暖操作场景提供实用的校准框架。
英文摘要:
We report a newly identified nonlinearity in H4RG-10 near-infrared detectors operating under moderately elevated-temperature conditions (114 K). This component, that potentially arises from illumination-independent defect currents, introduces additional nonlinearity not captured by conventional correction models. To address this issue, we propose a data-driven nonlinearity correction (NLC) method that models the nonlinear behavior of both the classical response and the defect currents, using dual-illumination measurements and a dark exposure. Applied to H4RG-10 detectors on the PRIME telescope, the method significantly improves signal linearity, especially for pixels with high defect current, while maintaining comparable performance elsewhere. By selecting the optimal correction model per pixel, reliable NLC is achieved across the full array. This study characterizes a nonlinearity intrinsic to H4RG-10 detectors and demonstrates that data-driven post-processing can effectively restore linearity in the presence of large defect currents. Although these effects are unlikely to be significant under nominal operating temperatures, the approach may provide a practical calibration framework for future warm-operation scenarios.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。