基于模型的钒氧化还原流电池系统放大:工程挑战与解决方案
Model-based upscaling of vanadium redox flow battery systems: engineering challenges and solutions
AI总结:
本研究提出了一种容器化的钒氧化还原流电池模型,结合混合热管理系统,分析了电流-电池数量比例和输出功率对效率和热过程的影响,以优化电池系统设计和热管理。
摘要:
大规模储能已成为将随机可用的可再生能源整合到电网中的不可避免解决方案。钒氧化还原电池在其他技术中提供了一种可行的选择,由于其长寿命和独立可扩展的输出功率和容量。电解质温度应保持在5-40摄氏度范围内以确保安全运行;因此,需要一个热管理系统,这会影响电池效率。本研究提出了一种详细的、容器化的电池模型,具有混合热管理系统,考虑热辐射和真实环境温度。在10种情况下研究了总共180种配置,范围从4到400千瓦,每种情况有18种不同的放电电流-电池数量比例,包括多堆排列。电流依赖的欧姆损耗影响电力效率,其在低电流配置中从最低的68%增加到89%。然而,由于泵、逆变器和热管理系统自身的消耗,净系统效率在43%到66%之间。除了详细的效率分析外,还提供了关于热过程的全面调查,以电流-电池数量比例和输出功率为依据,这对于设计热管理系统和确定电池尺寸至关重要。
英文摘要:
Large-scale energy storage has become an inevitable solution for integrating stochastically available renewable energy sources into the electric grid. Vanadium redox flow batteries offer a viable option among other technologies, due to their long lifetime and independently scalable output power and capacity. The electrolyte temperature should be maintained within the range of 5-40 Celsius for safe operation; therefore, a thermal management system is necessary, which affects battery efficiency. The study presents a detailed, containerized battery model with a hybrid thermal management system that considers thermal radiation and real ambient temperatures. A total of 180 configurations were investigated in 10 cases, ranging from 4 to 400 kW, with 18 different discharging current-cell number ratios in each case, including multistack arrangements. Current-dependent ohmic losses influence the electric efficiency, which increases from a minimum of 68% to 89% in low-current configurations. However, the net system efficiency ranges between 43% and 66% due to the self-consumption of pumps, the inverter, and the thermal management system. In addition to the detailed efficiency analysis, a comprehensive investigation of thermal processes is provided in terms of the current-cell number ratio and output power, which is crucial for designing thermal management systems and sizing batteries.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。