Microstructural origin of the simultaneous enhancements in strength and ductility of a nitrogen-doped high-entropy alloy
Soochow University（苏州大学）；Research Institute of Aero-Engine, Beihang University（北京航空航天大学发动机研究院）；Center for Advancing Materials Performance from the Nanoscale (CAMP-Nano) and Hysitron Applied Research Center in China (HARCC), and Center for Alloy Innovation and Design (CAID), State Key Lab for Mechanical Behavior of Materials, Xi’an Jiaotong University（西安交通大学材料行为科技重点实验室、纳米尺度材料性能提升中心（CAMP-Nano）、海塞特中国应用研究中心（HARCC）及合金创新与设计中心（CAID））；Max Planck Institute for Sustainable Materials（马普可持续材料研究所）；Institute for Materials Science, University of Stuttgart（斯图加特大学材料科学研究所）；ICAMS, Ruhr-Universität Bochum（波鸿鲁尔大学综合材料与结构科学研究所）；State Key Laboratory of Powder Metallurgy, School of Materials Science and Engineering, Central South University（中南大学材料科学与工程学院粉末冶金国家重点实验室）；Department of Materials, Royal School of Mine, Imperial College London（帝国理工学院皇家矿业学院材料系）
As one of the most abundant interstitial elements, nitrogen (N) is effective in improving yield strength of metallic materials, due to interstitial solid solution strengthening. Doping N can substantially enhance the yield strength but often leads to a decreased ductility, revealing a strength-ductility trade-off phenomenon. Here, we simultaneously enhance the strength and ductility in a non-equiatomic CrMnFeCoNi high-entropy alloy via N alloying and unravel the underlying microscopic mechanisms. The N-doped alloy (1 at.% N) shows an excellent combination of higher yield strength (104% increase) and larger ductility (38% increase), with a two-stage strain hardening behavior, compared to the N-free alloy. Detailed transmission electron microscopy (TEM) analysis reveals that N-doping introduces short-range order (SRO) domains within the microstructure, leads to pronounced planar slip, and promotes the formation of nano-spaced (6-15 nm) stacking faults and deformation twins. Continuous generation and interaction of the fine-spaced SFs act as a strong barrier for dislocation movement and provide ample room for dislocation storage. The interaction of SRO with dislocations and the evolution of SFs ascribe to the first strain hardening stage, and the disordering of the SRO along with the activation of deformation twins are attributed to the second strain hardening stage. Our work shows that N-doping is effective in simultaneously improving the strength-ductility synergy and provides novel insights into alloy design with slightly elevating the SFE, and manipulating the ordered structure within the HEA.
We formulate a generic concept model for the deformation of a locally disordered, macroscopically homogeneous material which undergoes irreversible strain softening during plastic deformation. We investigate the influence of the degree of microstructural heterogeneity and disorder on the concomitant strain localization process (formation of a macroscopic shear band). It is shown that increased microstructural heterogeneity delays strain localization and leads to an increase of the plastic regime in the macroscopic stress-strain curves. The evolving strain localization patterns are characterize…
Multi-phase materials are key for modern engineering applications. They are generally characterized by a high strength and ductility. Many of these materials fail by ductile fracture of the, generally softer, matrix phase. In this work we systematically study the influence of the arrangement of the phases by correlating the microstructure of a two-phase material to the onset of ductile failure. A single topological feature is identified in which critical levels of damage are consistently indicated. It consists of a small region of the matrix phase with particles of the hard phase on both sides…
The High Nitrogen Martensitic Stainless Steel (HNMS) was subjected to three different austenitizing cycles of 1050$^\circ$C, 1075$^\circ$C and 1100$^\circ$C followed by subzero treatment at -70$^\circ$C. The fraction of retained austenite has been reduced after sub-zero treatment as revealed by microstructural evolution. The material was subsequently tempered at different temperatures ranging from 180$^\circ$C to 650$^\circ$C and the change in micro-structure, hardness, tensile strength and toughness were investigated after each heat treatment cycle. Optical microscopy, electron microscopy wit…
Ductility and Brittle Fracture of Tungsten by Disconnection Pile-up on Twin Boundaries
Lawrence Livermore National Laboratory（劳伦斯利弗莫尔国家实验室）；Los Alamos National Laboratory（洛斯阿拉莫斯国家实验室）；University of California Irvine（加州大学尔湾分校）；University of California Los Angeles（加州大学洛杉矶分校）；Lehigh University（理海大学）；Northwestern University（西北大学）
Metallic materials, especially steel, underpin transportation technologies. High-manganese twinning induced plasticity (TWIP) austenitic steels exhibit exceptional strength and ductility from twins, low-energy microstructural defects that form during plastic loading. Their high-strength could help light-weighting vehicles, and hence cut carbon emissions. TWIP steels are however very sensitive to hydrogen embrittlement that causes dramatic losses of ductility and toughness leading to catastrophic failure of engineering parts. Here, we examine the atomic-scale chemistry and interaction of hydrog…
An extensive set of first-principles density functional theory calculations have been performed to study the behaviour of He, C and N solutes in austenite, dilute Fe-Cr-Ni austenitic alloys and Ni in order to investigate their influence on the microstructural evolution of austenitic steel alloys under irradiation.
A new $β$-metastable Ti-alloy is designed with the aim to obtain a TWIP alloy but positioned at the limit between the TRIP/TWIP and the TWIP dominated regime. The designed alloy exhibits a large ductility combined with an elevated and stable work-hardening rate. Deformation occurring by formation and multiplication of {332}<113> twins is evidenced and followed by in-situ electron microscopy, and no primary stress induced martensite is observed. Since microstructural investigations of the deformation mechanisms show a highly heterogeneous deformation, the reason of the large ductility is then i…
The microstructural development in H13 tool steel upon nitriding by an ion beam process was investigated. The nitriding experiments were performed at a relatively low temperature of about 400°C and at constant ion beam energy (400 eV) of different doses in a high-vacuum preparation chamber; the ion source was fed with high purity nitrogen gas. The specimens were characterized by X-ray photoelectron spectroscopy (XPS), electron probe microanalysis (EPMA), scanning and transmission electron microscopy (SEM and TEM), and grazing incidence and Bragg-Brentano X-ray diffractometry. In particular, th…
Three novel precipitation strengthened bcc alloys which exhibit a smooth microstructural gradient with composition have been fabricated in bulk form by induction casting. All three alloys are comprised of a mixture of disordered A2-(Fe, Cr) and L2$_1$-ordered (Ni, Fe)$_{2}$AlTi type phases both as-cast and after long-term annealing at 900 $^{\circ}$C. The ratio of disordered to ordered phase, primary dendrite fraction, and overall microstructural coarseness all decrease as Cr is replaced by Al and Ti. Differences in phase composition are quantified through domain averaged principal component a…
Effect of cold rolling strain on the microstructural evolution in equimolar MoNbTaTiZr refractory complex concentrated alloy: Comprehensive characterization
A novel and sustainable method to develop non-equiatomic CoCrFeNiMox high entropy alloys via spark plasma sintering using commercial commodity powders and evaluation of its mechanical behaviour
High-Temperature Deformation Behavior of Co-Free Non-Equiatomic CrMnFeNi Alloy
National Centre for Nuclear Research（国家核研究中心）；Institute for Technology of Nuclear and Other Mineral Raw Materials（核及其他矿物原材料技术研究所）；University of Edinburgh（爱丁堡大学）；Mines Saint-Etienne（圣艾蒂安矿业学院）
