arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2601.21777physics.flu-dyn
收藏

非线性气动响应及抗风等效静力设计方法用于抗曲率圆锥张力膜结构

Nonlinear Aerodynamic Response and an Equivalent Static Wind-resistant Design for Anticlastic Conical Tensile Membranes

Indian Institute of Technology Kanpur(坎普尔印度理工学院);University of California, Los Angeles(加州大学洛杉矶分校)

Ajay Kumar, Budhaditya De, Sudib Kumar Mishra, Devasmit Dutta

AI总结:

本文研究了抗曲率圆锥张力膜结构在随机风载下的非线性气动响应,并提出等效静力抗风设计方法,通过GRFs和NAFs系统化地呈现设计因素,结合回归模型和概率分析实现实际应用。

摘要:

圆锥张力膜结构(TMS)常用于美观、经济设计、高降雨和雪载。此类TMS在存在几何非线性的情况下表现出复杂的气动行为,过去研究不足。本文展示了抗曲率圆锥TMS在随机风载作用下的气动响应,并提出了一种等效静力抗风设计方法。通过大涡模拟(LES)模拟TMS在大气边界层(ABL)中的随机风载,该方法在之前的作者研究中已详细说明,因此在此不重复。随后,将气动载荷作为输入,进行考虑开放(即无立面)和封闭(有立面)TMS的非线性时程分析,TMS由外围/径向电缆支撑。关键参数(气动粗糙度高度、TMS的高宽比和膜预张力,尤其)的影响被展示。尽管增加预张力和高宽比增强了TMS的刚度,但前者占主导地位。增加粗糙度高度也会通过增强湍流导致峰值载荷/响应增加。通过 Gust Response Factors(GRFs)和额外的 Nonlinear Adjustment Factors(NAFs)提出等效静力抗风设计。这些因素系统地呈现,涵盖替代场景。多线性回归模型用于预测这些因素的预测建模,同时提供概率分析以用于实际设计,从而避免复杂的非线性动态分析。

英文摘要:

Conical Tensile Membrane Structure (TMS) is commonly used for aesthetics, economic design, high rain and snow loading. Such TMS shows complex aerodynamic behavior in presence of geometric nonlinearity, not adequately studied in the past. The aerodynamic responses of anticlastic conical TMS under random wind loading is presented herein along with an equivalent static wind resistant design approach. The stochastic wind loading on the TMS in the atmospheric boundary layer (ABL) is simulated via the Large Eddy simulation (LES); which is detailed in a previous study by the authors and hence not repeated here. The aerodynamic loading is then employed as input in conducting the nonlinear time history analyses considering open (i.e. without facade) and closed (with facade) TMS, supported by peripheral/radial cables. The influence of the key parameters (aerodynamic roughness height, the rise-span ratio of the TMS and the membrane prestress, notably) are demonstrated. Although increasing prestress and rise-to-span ratio enhances the stiffness of TMS, the former shows dominance. Increasing roughness height also lead to increased peak loading/responses by enhanced turbulence. An equivalent static wind-resistant design is presented via the Gust Response Factors (GRFs) and an additional Nonlinear Adjustment Factors (NAFs). These factors are presented systematically, encompassing alternative scenarios. Multi-linear regression models are presented for predictive modeling of these factors, along with a probabilistic analysis for their design values that can be employed in practice bypassing an involved nonlinear dynamic analysis.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑