arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2601.01657cs.CE
收藏

FLOAT:面向疲劳的浮动海上风电塔筒设计优化

FLOAT: Fatigue-Aware Design Optimization of Floating Offshore Wind Turbine Towers

Massachusetts Institute of Technology(麻省理工学院);University of Porto(波尔图大学);University of Aveiro(阿威罗大学);Delft University of Technology(代尔夫特理工大学);Brown University(布朗大学)

João Alves Ribeiro, Francisco Pimenta, Bruno Alves Ribeiro, Sérgio M. O. Tavares, Faez Ahmed

AI总结:

FLOAT框架通过轻量疲劳估计、概率采样和高保真建模,实现浮动海上风电塔筒的疲劳优化设计,将疲劳寿命从9个月延长至25年,同时保持最低质量。

摘要:

规模扩大是海上风电降低成本策略的核心,随着日益增大的轮毂和机舱,要求塔筒更高更坚固。在浮动海上风电机(FOWTs)中,这一趋势因风-波动力学耦合和平台运动而加剧疲劳载荷。传统疲劳评估需要数百万次高保真模拟,造成极高的计算成本并减缓设计创新。本文提出了FLOAT(面向疲劳的轻量优化与分析塔筒框架),一种加速疲劳意识塔筒设计的框架。它集成了三个关键贡献:一种轻量疲劳估计方法,使优化变得高效;一种基于蒙特卡洛的风-波概率采样方法,减少所需模拟次数;以及通过pitch/垂荡平台校准和高性能计算执行提升的高保真建模。该框架应用于IEA 22 MW FOWT塔筒,交付了作者所知的第一个面向疲劳的此基准模型重设计:FLOAT 22 MW FOWT塔筒。与6,468次模拟验证显示,优化后的塔筒将估计的疲劳寿命从9个月延长至25年,同时避免共振,并且轻量疲劳估计器提供保守预测,平均相对误差为-8.6%。实现这一寿命需要增加塔筒质量,产生最低质量的疲劳合规设计。所有结果和报告的寿命延长均在考虑的疲劳范围内(DLC 1.2,对齐风-波条件)。通过将模拟需求减少数量级,FLOAT使下一代FOWT的可靠和可扩展塔筒设计成为可能,弥合了工业需求与学术研究之间的差距,同时生成高保真数据集,可支持数据驱动和AI辅助的设计方法。

英文摘要:

Upscaling is central to offshore wind's cost-reduction strategy, with increasingly large rotors and nacelles requiring taller and stronger towers. In Floating Offshore Wind Turbines (FOWTs), this trend amplifies fatigue loads due to coupled wind-wave dynamics and platform motion. Conventional fatigue evaluation requires millions of high-fidelity simulations, creating prohibitive computational costs and slowing design innovation. This paper presents FLOAT (Fatigue-aware Lightweight Optimization and Analysis for Towers), a framework that accelerates fatigue-aware tower design. It integrates three key contributions: a lightweight fatigue estimation method that enables efficient optimization, a Monte Carlo-based probabilistic wind-wave sampling approach that reduces required simulations, and enhanced high-fidelity modeling through pitch/heave-platform calibration and High-Performance Computing execution. The framework is applied to the IEA 22 MW FOWT tower, delivering, to the authors' knowledge, the first fatigue-oriented redesign of this benchmark model: FLOAT 22 MW FOWT tower. Validation against 6,468 simulations shows that the optimized tower extends the estimated fatigue life from 9 months to 25 years while avoiding resonance, and that the lightweight fatigue estimator provides conservative predictions with a mean relative error of -8.6%. Achieving this lifetime requires increased tower mass, yielding the lowest-mass fatigue-compliant design. All results and the reported lifetime extension are obtained within the considered fatigue scope (DLC 1.2, aligned wind-wave conditions). By reducing simulation requirements by orders of magnitude, FLOAT enables reliable and scalable tower design for next-generation FOWTs, bridging industrial needs and academic research while generating high-fidelity datasets that can support data-driven and AI-assisted design methodologies.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑