arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2512.23593cs.RO
收藏

基于卡尔曼滤波的转向线控系统扰动观测器

A Kalman Filter-Based Disturbance Observer for Steer-by-Wire Systems

Professorship of Autonomous Vehicle Systems, Technical University of Munich(自动驾驶车辆系统教授职位,慕尼黑技术大学);Munich Institute of Robotics and Machine Intelligence (MIRMI)(慕尼黑机器人与机器智能研究所(MIRMI));Chair of Automotive Engineering, Institute of Land and Sea Transport, Technical University of Berlin(汽车工程教授职位,陆海运输研究所,柏林技术大学)

Nikolai Beving, Jonas Marxen, Steffen Mueller, Johannes Betz

AI总结:

本文提出基于卡尔曼滤波的扰动观测器,用于估计转向线控系统中的高频驾驶员扭矩,通过仿真验证其在处理摩擦非线性方面的有效性。

摘要:

转向线控系统取代机械连接件,提供了重量减轻、设计灵活性和与自动驾驶兼容等优势。然而,它们容易受到无意驾驶员扭矩引起的高频干扰,即驾驶员阻抗,这会降低转向性能。现有方法要么依赖直接扭矩传感器,成本高且不实用,要么缺乏捕捉快速高频驾驶员引起的干扰的时间分辨率。我们通过设计基于卡尔曼滤波的扰动观测器来解决这一限制,该观测器仅使用电机状态测量来估计高频驾驶员扭矩。我们将驾驶员的被动扭矩建模为一个扩展状态,使用PT1滞后近似,并将其整合到线性和非线性转向线控系统模型中。在本文中,我们展示了该扰动观测器的设计、实现和仿真,并评估了不同卡尔曼滤波变体。我们的研究结果表明,所提出的扰动观测器能够仅在14毫秒的最小延迟下准确重建驾驶员引起的干扰。我们展示非线性扩展卡尔曼滤波在处理摩擦非线性方面优于其线性对应物,提高了从静态到动态摩擦转换期间的估计效果。鉴于研究的方法,无法避免依赖基于仿真的验证而不是实际实验。进一步的研究需要调查观测器在真实驾驶条件下的鲁棒性。

英文摘要:

Steer-by-Wire systems replace mechanical linkages, which provide benefits like weight reduction, design flexibility, and compatibility with autonomous driving. However, they are susceptible to high-frequency disturbances from unintentional driver torque, known as driver impedance, which can degrade steering performance. Existing approaches either rely on direct torque sensors, which are costly and impractical, or lack the temporal resolution to capture rapid, high-frequency driver-induced disturbances. We address this limitation by designing a Kalman filter-based disturbance observer that estimates high-frequency driver torque using only motor state measurements. We model the drivers passive torque as an extended state using a PT1-lag approximation and integrate it into both linear and nonlinear Steer-by-Wire system models. In this paper, we present the design, implementation and simulation of this disturbance observer with an evaluation of different Kalman filter variants. Our findings indicate that the proposed disturbance observer accurately reconstructs driver-induced disturbances with only minimal delay 14ms. We show that a nonlinear extended Kalman Filter outperforms its linear counterpart in handling frictional nonlinearities, improving estimation during transitions from static to dynamic friction. Given the study's methodology, it was unavoidable to rely on simulation-based validation rather than real-world experimentation. Further studies are needed to investigate the robustness of the observers under real-world driving conditions.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑