带有集成单层阀门的SCU-Hand:用于毫克级粉末处理的漏斗形机器人手
SCU-Hand with Integrated Single-Sheet Valve: A Funnel-Shaped Robotic Hand for Milligram-Scale Powder Handling
AI总结:
本文提出SCU-Hand-SV,通过集成可控阀门实现精确毫克级粉末 dispensing,实验表明其在粉末称重中的高精度和灵活性,适用于实验室自动化任务。
摘要:
实验室自动化(LA)有潜力通过使固态材料发现加速,通过实现无需人工干预的连续机器人操作。尽管已开发出用于粉末研磨和X射线衍射(XRD)分析的机器人系统,但完全自动化毫克级粉末处理仍是一个重大挑战,由于粉末的复杂流体动力学和实验室任务的多样性。为此,本研究提出SCU-Hand-SV(软锥形通用机器人手带单层阀),在先前工作中保留了柔软性和锥形片设计,同时在锥顶集成可控阀门,以实现精确、增量式毫克级粉末 dispensing。SCU-Hand-SV通过基于粉末流模型的反馈控制系统与外部平衡集成。实验评估显示,80%的试验在-2 mg至+2 mg范围内达到误差,最大误差约为20 mg,目标范围为20 mg至3 g。此外,通过整合用于漏斗的常用流预测模型并进行在线参数识别,系统能够适应粉末动态的变化。与直接PID控制相比,所提出的基于模型的控制显著提高了精度和收敛速度。这些结果突显了所提出系统在实现高效和灵活粉末称重方面的潜力,具有向更大数量扩展和适用于广泛实验室自动化任务的应用前景。
英文摘要:
Laboratory Automation (LA) has the potential to accelerate solid-state materials discovery by enabling continuous robotic operation without human intervention. While robotic systems have been developed for tasks such as powder grinding and X-ray diffraction (XRD) analysis, fully automating powder handling at the milligram scale remains a significant challenge due to the complex flow dynamics of powders and the diversity of laboratory tasks. To address this challenge, this study proposes the SCU-Hand-SV (Soft Conical Universal Robotic Hand with Single-sheet Valve), which preserves the softness and conical sheet designs in prior work while incorporating a controllable valve at the cone apex to enable precise, incremental dispensing of milligram-scale powder quantities. The SCU-Hand-SV is integrated with an external balance through a feedback control system based on a model of powder flow and online parameter identification. Experimental evaluations with glass beads, monosodium glutamate, and titanium dioxide demonstrated that 80% of the trials achieved an error within -2 mg to +2 mg, and the maximum error observed was approximately 20 mg across a target range of 20 mg to 3 g. In addition, by incorporating flow prediction models commonly used for hoppers and performing online parameter identification, the system is able to adapt to variations in powder dynamics. Compared to direct PID control, the proposed model-based control significantly improved both accuracy and convergence speed. These results highlight the potential of the proposed system to enable efficient and flexible powder weighing, with scalability toward larger quantities and applicability to a broad range of laboratory automation tasks.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。