含直流偏置的均质谐波平衡有限元法
DC-Biased Homogenized Harmonic Balance Finite Element Method
AI总结:
本文提出一种含直流偏置的均质谐波平衡有限元法,用于高效模拟具有叠片结构的三维设备的非线性涡流问题,通过改进均质化技术以考虑铁磁饱和,显著减少计算资源需求。
摘要:
均质谐波平衡有限元法通过将谐波平衡法与基于频域的均质化技术相结合,实现了对具有叠片结构的三维设备的高效非线性涡流模拟。该方法避免了涡流场问题昂贵的时间步进计算,允许使用不解析单个叠片的较粗有限元网格。本文将该方法扩展以处理具有直流偏置的激励信号。为此,我们调整了原始均质化技术,以更好地考虑铁磁饱和现象。所得均质磁阻率公式通过从叠片的一维有限元模拟计算得到的查找表进行评估,该表包含叠片中的平均磁通密度及相应的皮肤深度。我们比较了所提出方法与细网格瞬态参考模拟的结果。测试涵盖不同级别的铁磁饱和度和50 Hz至10 kHz之间的频率。对于中等铁磁饱和度,该方法对涡流损耗和磁能的近似程度良好,相对误差低于10%,同时在10 kHz时将所需自由度数量减少1.5个数量级。这导致模拟时间从当代服务器上的2天减少到标准工作站上的90分钟。
英文摘要:
The homogenized harmonic balance finite element (FE) method enables efficient nonlinear eddy-current simulations of 3-D devices with lamination stacks by combining the harmonic balance method with a frequency-domain-based homogenization technique. This approach avoids expensive time stepping of the eddy-current field problem and allows the use of a relatively coarse FE mesh that does not resolve the individual laminates. In this paper, we extend the method to handle excitation signals with a dc bias. To achieve this, we adapt the original homogenization technique to better account for ferromagnetic saturation. The resulting formula for the homogenized reluctivity is evaluated using a look-up table computed from a 1-D FE simulation of a lamination and containing the average magnetic flux density in the lamination and the corresponding skin depth. We compare the results of the proposed method to those from a fine-mesh transient reference simulation. The tests cover different levels of ferromagnetic saturation and frequencies between 50 Hz and 10 kHz. For moderate ferromagnetic saturation, the method gives a good approximation of the eddy-current losses and the magnetic energy, with relative errors below 10%, while reducing the required number of degrees of freedom at 10 kHz by 1.5 orders of magnitude. This results in a reduction in simulation time from 2 days on a contemporary server to 90 minutes on a standard workstation.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。