MOBIUS: A Multi-Modal Bipedal Robot that can Walk, Crawl, Climb, and Roll
Mitsubishi Electric Research Laboratories（三菱电机研究实验室）；Robotic Systems Lab（机器人系统实验室）；Robotics and Mechanisms Laboratory（机器人与机构实验室）；Department of Mechanical and Aerospace Engineering, University of California, Los Angeles（加州大学洛杉矶分校机械与航空航天工程系）
Alexander Schperberg, Yusuke Tanaka, Stefano Di Cairano, Dennis Hong
备注：
Paper is accepted at the Robotics: Science and Systems conference, held in Sydney, Australia, July 13th-17th, 2026. Alexander Schperberg and Yusuke Tanaka are co-first authors. Both were at the Robotics and Mechanisms Laboratory (RoMeLa) at UCLA when the work started, and are now with Mitsubishi Electric Research Laboratories and ETH Zurich (RSL) respectively
This paper presents the MOBIUS platform, a bipedal robot capable of walking, crawling, climbing, and rolling. MOBIUS features four limbs, two 6-DoF arms with two-finger grippers for manipulation and climbing, and two 4-DoF legs for locomotion--enabling smooth transitions across diverse terrains without reconfiguration. A hybrid control architecture combines reinforcement learning for locomotion and force control for compliant contact interactions during manipulation. A high-level MIQCP planner autonomously selects locomotion modes to balance stability and energy efficiency. Hardware experiments demonstrate robust gait transitions, dynamic climbing, and full-body load support via pinch grasp. Overall, MOBIUS demonstrates the importance of tight integration between morphology, high-level planning, and control to enable mobile loco-manipulation and grasping, substantially expanding its interaction capabilities, workspace, and traversability.
The importance of humanoid robots in today's world is undeniable, one of the most important features of humanoid robots is the ability to maneuver in environments such as stairs that other robots can not easily cross. A suitable algorithm to generate the path for the bipedal robot to climb is very important. In this paper, an optimization-based method to generate an optimal stairway for under-actuated bipedal robots without an ankle actuator is presented. The generated paths are based on zero and non-zero dynamics of the problem, and according to the satisfaction of the zero dynamics constrain…
In this paper, a novel optimal technique for joint angles trajectory tracking control with energy optimization for a biped robot with toe foot is proposed. For the task of climbing stairs by a 9-link biped model, a cycloid trajectory for swing phase is proposed in such a way that the cycloid variables depend on the staircase dimensions. Zero Moment Point(ZMP) criteria is taken for satisfying stability constraint. This paper mainly can be divided into 3 steps: 1) Planning stable cycloid trajectory for initial step and subsequent step for climbing upstairs and Inverse Kinematics using an unsuper…
A novel efficient downstairs trajectory is proposed for a 9 link biped robot model with toe-foot. Brachistochrone is the fastest descent trajectory for a particle moving only under the influence of gravity. In most situations, while climbing downstairs, human hip also follow brachistochrone trajectory for a more responsive motion. Here, an adaptive trajectory planning algorithm is developed so that biped robots of varying link lengths, masses can climb down on varying staircase dimensions. We assume that the center of gravity (COG) of the biped concerned lies on the hip. Zero Moment Point (ZMP…
This paper uses a simple state machine to develop a control algorithm for controlling an infant humanoid in the context of a simple model system. The algorithm is inspired by a baby who starts learning to stand and walk at 7 to 12 months of age: he or she initially learns to crawl and then, once the lower limb muscles are strong enough, can learn to walk by coming to support his or her upper trunk. Ideally, this algorithm-supported locomotion can take the baby to any desired location: a pile of toys, a tasty snack, or the baby's parents or relatives. In this paper we analyze the crawling stage…
National Institute of Advanced Industrial Science and Technology (AIST)（产业技术综合研究所）；University of Tsukuba（筑波大学）
Deep reinforcement learning (RL) based controllers for legged robots have demonstrated impressive robustness for walking in different environments for several robot platforms. To enable the application of RL policies for humanoid robots in real-world settings, it is crucial to build a system that can achieve robust walking in any direction, on 2D and 3D terrains, and be controllable by a user-command. In this paper, we tackle this problem by learning a policy to follow a given step sequence. The policy is trained with the help of a set of procedurally generated step sequences (also called foot…
This paper discusses the design of a novel compliant in-pipe climbing modular robot for small diameter pipes. The robot consists of a kinematic chain of 3 OmniCrawler modules with a link connected in between 2 adjacent modules via compliant joints. While the tank-like crawler mechanism provides good traction on low friction surfaces, its circular cross-section makes it holonomic. The holonomic motion assists it to re-align in a direction to avoid obstacles during motion as well as overcome turns with a minimal energy posture. Additionally, the modularity enables it to negotiate T-junction with…
Advances in planetary robotics have led to wheeled robots that have beamed back invaluable science data from the surface of the Moon and Mars. However, these large wheeled robots are unable to access rugged environments such as cliffs, canyons and crater walls that contain exposed rock-faces and are geological time-capsules into the early Moon and Mars. We have proposed the SphereX robot with a mass of 3 kg, 30 cm diameter that can hop, roll and fly short distances. A single robot may slip and fall, however, a multirobot system can work cooperatively by being interlinked using spring-tethers a…
The application of GNC devices on small robots is a game-changer that enables these robots to be mobile on low-gravity planetary surfaces and small bodies. Use of reaction wheels enables these robots to roll, hop, summersault and rest on precarious/sloped surfaces that would otherwise not be possible with conven-tional wheeled robots. We are extending this technology to enable robots to climb off-world canyons, cliffs and caves. A single robot may slip and fall, however, a multirobot system can work cooperatively by being interlinked using spring-tethers and work much like a team of mountainee…
Evaluation of an Actuated Spine in Agile Quadruped Locomotion
Department of Computer Science, Technical University of Darmstadt（德意志技术大学达姆施塔特分校计算机科学系）；IDEAS Research Institute（IDEAS研究所）；Institute of Robotics and Machine Intelligence, Poznan University of Technology（波兹南技术大学机器人与机器智能研究所）
MOVE: Multi-skill Omnidirectional Legged Locomotion with Limited View in 3D Environments
Institute of Cyber-Systems and Control, Zhejiang University（浙江大学控制科学与工程学院 cyber-system 研究所）；State Key Laboratory of Industrial Control Technology（工业控制技术国家重点实验室）
Robotics Institute, Carnegie Mellon University（卡内基梅隆大学机器人学院）
In this work, we present an approach to planning for humanoid mobility. Humanoid mobility is a challenging problem, as the configuration space for a humanoid robot is intractably large, especially if the robot is capable of performing many types of locomotion. For example, a humanoid robot may be able to perform such tasks as bipedal walking, crawling, and climbing. Our approach is to plan for all these tasks within a single search process. This allows the search to reason about all the capabilities of the robot at any point, and to derive the complete solution such that the plan is guaranteed…
SoloParkour: Constrained Reinforcement Learning for Visual Locomotion from Privileged Experience
LAAS-CNRS（法国国家科学研究中心自动化与系统分析实验室）；Université de Toulouse（图卢兹大学）；CNRS（法国国家科学研究中心）；New York University（纽约大学）；Artificial and Natural Intelligence Toulouse Institute（图卢兹人工与自然智能研究所）
