NiTi管在拉伸和弯曲下的尺寸依赖转变模式:立体数字图像相关实验与建模
Size-dependent transformation patterns in NiTi tubes under tension and bending: Stereo digital image correlation experiments and modeling
AI总结:
研究NiTi管在拉伸和弯曲下的转变模式依赖于管外径D和壁厚t,通过静态单轴拉伸和大旋转弯曲实验,利用多倍率高分辨率立体数字图像相关系统同步分析表面应变场和全局应力应变响应,揭示尺寸依赖行为及相变机制。
摘要:
通过准静态单轴拉伸和大旋转弯曲实验,研究了超弹性NiTi管中转变模式对管外径D和壁厚t的依赖性。利用多倍率高分辨率立体数字图像相关系统同步分析外表面应变场与全局应力应变和弯矩-曲率响应。转变模式表现出系统性的尺寸依赖行为。在拉伸情况下,对于特定D,当直径-厚度比D/t减小时,脂肪/扩散螺旋带数量减少,与薄管中的尖锐/细带相反。因此,奥氏体-马氏体前缘形态从细指状向粗指状转变。在特征D/t以下,前缘形态不再呈现图案化,相变通过无指前缘传播进行。此外,转变模式与D和D/t存在相互关联,其中在薄但小的管中观察到具有扩散指的前缘。在弯曲情况下,全局弯矩-曲率响应和转变模式均表现出D和D/t依赖性。尽管楔形马氏体域在所有管尺寸中一致形成,但其生长在较小和较厚的管中因几何约束受到明显限制。采用梯度增强的超弹性模型分析不同尺寸管中的不同转变模式。基于体能和界面能的竞争以及马氏体指的能耗,解释尺寸依赖行为。通过利用轴对称管配置作为参考能量状态,量化指形成相关的额外能量。
英文摘要:
The dependence of transformation pattern in superelastic NiTi tubes on tube outer diameter D and wall-thickness t is investigated through quasi-static uniaxial tension and large-rotation bending experiments. The evolution of outer-surface strain fields is synchronized with global stress-strain and moment-curvature responses using a multi-magnification, high-resolution stereo digital image correlation system at 0.5-2x magnifications. The transformation patterns exhibit systematic size-dependent behaviors. Under tension and for a specific D, as the diameter-to-thickness ratio D/t decreases, a decreasing number of fat/diffuse helical bands emerge, in contrast to sharp/slim bands in thin tubes. Consequently, the austenite-martensite front morphology transitions from finely-fingered to coarsely-fingered with decreasing D/t. Below a characteristic D/t, front morphology no longer exhibits patterning and phase transformation proceeds via propagation of a finger-less front. Moreover, the transformation pattern exhibits an interrelation between D and D/t, where a front possessing diffuse fingers is observed in a thin but small tube. Under bending, both the global moment-curvature response and transformation pattern exhibit D- and D/t-dependence. While wedge-like martensite domains consistently form across all tube sizes, their growth is noticeably limited in smaller and thicker tubes due to geometrical constraints. A gradient-enhanced model of superelasticity is employed to analyze the distinct transformation patterns observed in tubes of various dimensions. The size-dependent behavior is explained based on the competition between bulk and interfacial energies, and the energetic cost of accommodating martensite fingers. By leveraging an axisymmetric tube configuration as a reference energy state, the extra energy associated with the formation of fingers is quantified.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。